Owner's Manual

SMART FUNCTIONS

After the data transfer is complete, the

service agent will explain the result of the Smart Diagnosis™.

NOTE

• Position the phone so that its microphone is

aligned with the speaker hole.

• The Smart Diagnosis™ sound is generated

after around three seconds.

• Do not take the phone off the speaker hole

while the data is transmitted.

• Hold the phone to the upper right speaker hole

and wait while the data is transmitted.

• The data transfer sound may be harsh to the ear while the

Smart Diagnosis™ data is being transmitted, but do not take the

phone off the speaker hole for accurate diagnosis until the data

transfer sound has stopped.

• When the data transfer is complete, the transfer completion message

is displayed and the control panel is automatically turned off and

then on again after a few seconds. After the customer information

centre explains the diagnosis result.

• The Smart Diagnosis™ function depends on the local call quality.

• The communication performance will improve and you can transmit

a better signal if you use a land line home phone.

• If the Smart Diagnosis™ data transfer is poor due to poor call quality,

you may not receive the best Smart Diagnosis™ service.