Owner's Manual
Operation
14
There is a replacement indicator light for the
water filter cartridge on the dispenser.
The water filter should be replaced every six
months.
The filter light comes on to let you know
when to replace filter.
After replacing the filter, press and hold the
filter button more than 3 seconds to reset the indicator.
Filter condition
(filter replacement
cycle) display
function
Dispenser light
This button turn the dispenser light
in the dispenser on an off.
The dispenser light function is turned
ON or OFF by pressing Light/Filter
button.
On Off
The other
functions
Diagnosis (failure detection) function
Diagnosis function automatically detects failure when failure is found in product during
the use of refrigerator.
If failure occurs at product, it does not operate though pressing any button and normal
indication is not done. In this case, do not turn power off but immediately contact with
the local service center. A lot of time are need for service engineer to detect the failed
part if turning it off.
Ambient Temperature Display Window.
Temperature is displayed only between -9°C ~ 49°C.
Temperature less than -9°C is indicated with LO and
temperature more than 49°C is indicated with HI.