Owner's Manual

Connection to External equipment
7
Antenna/Cable Connection
1
1
Connecting a VCR
2
2
- For optimum picture quality, adjust antenna direction if needed.
Connection
1. Connect the audio/video out sockets of the VCR to
audio/video in sockets of the set.
2. Press the TV/AV/RADIO button to select
AV .
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note :
a If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO socket of the set.
bWhen connecting the set to an external source, match
the colours of AUDIO/VIDEO input jacks on the set with
the output jacks on the audio/video equipment: Video =
yellow, Audio (Left) = white, Audio (Right) = red.
Typical Antennas
VCR
Connection Panel
Direct Connection
• In a poor signal area to improve picture quality, purchase
and install a signal amplifier.
• If the antenna is not installed properly, contact your dealer
for assistance.
Apartment Buildings
Single Family Home
outdoor
antenna
wall antenna
socket
VHF antenna
UHF antenna
75Ω Round Cable
Bronze Wire
Turn clockwise to tighten.
Bronze Wire
Be careful not to bend the bronze wire when
connecting the antenna.