English ENHANC ED BZ03 GCE-8320B DeutschFraniIloEp
CAUTION The laser used in the CD-R/RW drive : Do not attempt to open the can To reduce the risk of electric No user-serviceable Refer damage your eyes. cover. shock, do parts inside. service servicing to qualified Use of controls or performance of not remove cover (or back). personnel. procedures other than those specified here in may result in hazardous radiation exposure.
This product is manufactured to of EEC DIRECTIVE CAUTION - requirements INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM. VARNING-OSYNLIG AR with the radio interference comply 89/336/EEC, 93/68/EEC and 73/23/EEC. LASERSTRALNING NAR DENNA DEL AR OPPNAD STRALEN FARLIG. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PC DOS is a LASER LASER LASER LASER PRODUCT PRODUKT LAITE APPARAT trademark of IBM Inc.
Contents Introduction Features...................................2 ImportantPrecautions........................3 SystemEnvironment.........................4 LocationandFunctionofControls. Installation . . . . . . . . . . . . .5 InstallingtheDrive...........................6 DeviceDrivers.............................11 Operation HowtoUsetheDiscs........................12 Appendix Troubleshooting............................13 Specifications..............................
Thank you for Features purchasing this CD-R/RW Drive. ? Enhanced-IDE ? Power (ATAPI) interface. tray loading and ejection of disc. (The disc can also be ejected manually.) ? The recorded CD-RW media multiread CD-ROM ? ? ? * can be played Player, maintaining in future DVD a player compatibility Windows 95/98/2000/ME/XP & NT 4.0. Supports Automatic buffer underrun error prevention technology-Super Link Writing (CD-R), 10X Writing (CD-RW) and 40X max Reading (CD-R/RW, CD-ROM)*.
Important Precautions Follow these Precautions ? precautions handling the drive discs. or Please take notice that the manufacturer of this equipment does inappropriate installation or handling or direct or indirect damages. Please take notice that the manufacturer will bear no responsibility for direct or indirect damages caused by the use of this product or not offer any ? when warranty against data loss due to its malfunction.
System Environment Computer This unit can be in the operated system environment explained here. System requirements 350MHz CPU (or faster) Pentium (for 32x speed, faster recommended) 500MHz Memory or Windows 95/98/ME : 64MB or greater. Windows NT Workstation Ver. 4.
DirectCDTM v2.5b(s) Location and Function of Controls Front Panel 6 5 READ RAD RITE WRITE 12 1. 3 6. Drive Headphone Jack Emergency Eject Stop/Eject Button 5. Disc Tray activity indicators Two colored LEDs 2. Volume Control 3. 4 Hole 4. the operation (1) Read used to indicate are of CD-R/RW Drive. The orange LED is displayed when the spindle motor begins the spin-up operation: accessing data, reading data, playing Audio, and opening or closing the tray.
DirectCDTM v2.5b(s) Installation the Drive Installing Before Before installing the drive, please You will need the Installation ? A driver of screw note the following points. following: suitable size to fit the a securing screws for the drive unit. ? The manual for the positions computer, so you can find the mounting for the IDE controller cable. Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets.
DirectCDTM v2.5b(s) Connect the power cable from the computer's power supply to the socket on the drive unit, fitting the connector firmly into the power in connector. Connecting the Power If there is to Connector no purchase spare power cable available in the computer, you will have splitter cable of a suitable type.
DirectCDTM v2.5b(s) Before Jumper Setup rear set the installation, jumper on the jumper connector on the panel. The drive can be connected as interface. When several (ATAPI) connected, each must be set in a the Master or Slave on an EIDE (up to four) EIDE devices are unique way. Specific knowledge of hardware and software is necessary to install the drive.
DirectCDTM v2.5b(s) The CD-R/RW drive connects to the motherboard of the host PC puter using Connection To Install a Drive as a an Slave from the Master Master or To install the drive as as a device, depending Master, the jumper on can your computer. be left as supplied factory. Master drive Drive com- IDE interface cable.
DirectCDTM v2.5b(s) To Install To install the drive as rear a Slave panel Slave, change the jumper setting as a the on to SL.
Device Drivers When Windows 95/98/2000/ME/XP using Workstation Ver. 4.0, special no or device driver is Window NT required. Your system, upon Power On and bootup after installing and connecting the new CD-RW drive, will recognize and load native software drivers automatically. The DOS and Windows 3.1 drivers anytime users can download the DOS Device via internet. For your information, please consult the following http://www.lge.com http://www.lgeservice.com/drivers.
DirectCDTM v2.5b(s) Operation How to Use the Discs When CD-ROM using attach any stickers attached not only causes may be lost due to DO NOT or use discs, don't discs with them on the disc a high speed! warped discs. The very or drive's optical break. non-standard discs. NON-standard discs may not play properly. Non-standard discs CD at cracked damaged, damaged if they store data CD-RW Using to the disc itself.
Troubleshooting Before Requesting Before ? Service ? calling for service, check this list. The drive doesn't have power. ? Is the power ? Is the Power Connector to the drive The ? supply system doesn't Are the cable from the host computer plugged in? securely attached? start.
Specifications Host Interface E-IDE/ATAPI Disc diameters 12cm/8cm, standard size CD's Supported discs CD-Digital Audio & CD-Extra CD-ROM XA CD-I Ready, CD-Plus, CD-ROM, , FMV, CD -TEXT, CD Bridge, CD-R, CD-RW, Video CD, Photo-CD (Single & Multi-Session).
Copyright Caution! ⓒ 2002 The disc rotates at 1000 Sylvan Ave. Englewood Cliffs NJ the disc to shatter 07632 U.S.A. or high speed Disc crush crush while in or only can occur occurrence, but there LG Electronics Canada Inc. 235 Superior Blvd, Mississauga Ontario, Canada are steps which into the drive. 1. Take care not to use worn, LG Electronics U. K. Ltd. 2. LG House, 264 Bath Road, Slough Berkshire SL1 4DT 3.
