Website e-mail ENHANCE D BZ03 : : http//www.LGEservice.com http//www.LGEservice.com/techsup.
CAUTION The laser used in the CD-R/RW drive : Do not to open the attempt To reduce the risk of electric No user-serviceable Refer damage can your eyes. cover. shock, do parts inside. service servicing to qualified Use of controls or performance of not remove cover (or back). personnel. procedures other than those specified here in may result in hazardous radiation exposure.
This product is manufactured to comply with the radio interference requirements 89/336/EEC, 93/68/EEC and 73/23/EEC. of EEC DIRECTIVE CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM. VARNING-OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD STRALEN AR FARLIG.
Contents Introduction Features........................................2 ImportantPrecautions.............................3 SystemEnvironment..............................4 LocationandFunctionofControls...................5 Installation InstallingtheDrive...............................6 DeviceDrivers..................................11 Operation HowtoUsetheDiscs............................12 Appendix Troubleshooting.................................13 Specifications..................................
Thank you for this purchasing Features CD-R/RW ? Enhanced-IDE Drive. ? Power (ATAPI) interface. tray loading and ejection of disc. (The disc can also be ejected manually.) ? The recorded CD-RW media multiread CD-ROM can be played in a DVD player Player, maintaining future compatibility Windows 95/98/2000/ME/XP & NT 4.0. ? Supports ? Automatic buffer underrun 40X ? or a max PCAV error Writing (CD-R), prevention technology-Super Link 12X Writing (CD-RW), and 40X max reading*.
Important Precautions Follow these Precautions ? when handling the drive or discs. Please take notice that the manufacturer of this offer any or ? precautions warranty against data loss due handling or direct or indirect equipment does not inappropriate installation to damages. Please take notice that the manufacturer will bear direct or indirect damages caused by the use no of this responsibility product or its for responsibility for malfunction.
System Environment Computer This unit can System requirements be operated CPU in the system environment explained here. 350MHz (or faster) 500MHz or faster Pentium Windows 95/98/ME Memory 40x (for speed, recommended) 64MB : greater. or Windows NT Workstation Ver. 4.0: 64MB greater (128MB or recommended) Windows 2000/XP: 128MB or greater(256MB over recommended) Hard disk 650MB or more or over free space. for (The free space needed the quantity of data.
DirectCDTM v2.5b(s) Introduction Location and Function of Controls Front Panel 6 5 AD READ WRITE WR 12 1. 3 4 6. Drive Headphone Jack activity indicators Two colored LEDs 2. Volume Control 3. Emergency Eject Hole 4. Stop/Eject Button 5. Disc Tray the operation (1) Read are used to indicate of CD-R/RW Drive. The orange LED is displayed when the spindle motor begins the spin-up operation: accessing data, reading data, playing Audio, and opening or closing the tray.
DirectCDTM v2.5b(s) Installation Installing Before Before the Drive the installing drive, please You will need the Installation ? A screw note the following points. following: driver of a suitable size to fit the securing computer, find the screws for the drive unit. ? The manual for the positions so you can mounting for the IDE controller cable. Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets.
DirectCDTM v2.5b(s) Installation Connect the power cable from the computer's power supply to the socket the drive unit, fitting the connector firmly into the power in connector. Connecting on the Power If there is to Connector no purchase spare power cable available in the splitter cable of a suitable type. computer, you will have a POWER +5 POWER AUDIO Beveled NOTE : edge ANALOG AUDIO RGL CSM SLA GND +12 +12 40 up warranty.
DirectCDTM v2.5b(s) Installation Before Jumper Setup installation, set the jumper on the jumper connector the on rear panel. The drive be connected can (up must be set in way. a unique the Master or Slave on an EIDE (ATAPI) four) EIDE devices are connected, each Specific knowledge of hardware and as interface. When several to software is necessary to install the drive.
DirectCDTM v2.5b(s) Installation The CD-R/RW drive connects to the motherboard of the host PC Connection To Install as a an IDE interface cable. You may connect the CD-R/RW Drive Slave or Master device, depending To install the drive Master Drive computer using the as a on your Master, the jumper as a computer. can be left from supplied as factory.
DirectCDTM v2.5b(s) To Install Installation To install the drive as a panel Slave Drive as a Slave, change the jumper setting on the rear to SL.
Device Drivers When using Windows 95/98/2000/ME/XP Workstation Ver. 4.0, or Window NT special device driver is required. Your system, upon Power On and bootup after installing and connecting the new CDRW drive, will recognize and load native software drivers automatically. no The DOS and Windows 3.1 anytime users can download the DOS Device drivers via internet. For your information, please consult the following http://www.lge.com http://www.lgeservice.com/drivers.
DirectCDTM v2.5b(s) Operation How to Use the Discs When CD-ROM using discs, CD-R discs or only read and write errors, but data causes due to labels to the discs. or any stickers damage may be DO NOT use discs, don't attach on the disc may be lost a high speed! warped discs. The very or drive's optical non-standard discs. NON-standard discs may not unit play or properly. Non-standard discs are type discs.
Troubleshooting Before Before ? Requesting Service ? calling for service, check this list. The drive doesn't have power. ? Is the power ? Is the Power Connector to the drive The ? ? ? supply system doesn't cable from the host computer plugged in? securely attached? start.
Specifications Host Interface E-IDE/ATAPI Disc diameters 12cm/8cm, standard size CD's Supported discs CD-Digital Audio & CD-Extra XA CD-I Ready, Video Mounting direction Read/Write CD, FMV, Photo-CD CD CD-Plus, CD-ROM, CD-ROM , -TEXT, CD Bridge, CD-R, CD-RW, (Single & Multi-Session).
ⓒ 2002 Copyright Caution! The disc rotates at high speed in the drive unit. Use of worn, damaged, or non-standard CD-ROM discs can only adversely affect the drive and cause the disc to LG Electronics U.S.A. Inc. 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A. or shatter http://www.lgeus.com or LG Electronics Canada Inc. Superior Blvd, Mississauga Ontario, Canada 12, use a damaged extremely rare steps which can be taken to inserting them into 1. Take Willich, Germany LG Electronics U.
