Owner's Manual

CLEANING

WATER DISPENSER (OPTIONAL)

Grille -

Wipe with a clean, damp cloth and then dry using

dry cloth.

Water Tank -

1. Water Filling

It is not necessary to remove the water tank in order to fill it (it

can be filled by opening the water tank cap).

- Before closing door, close the cap and clamp tightly.

- Do not use liquids containing sugar or carbonated drinks.

2.Disassembly

Lift the water tank, gripping a side and bottom of water tank.

OTE

Before disassembly of water tank, drain all water from the

dispenser

3. Assembly

If by some cause the water tank is dislocated, place it again at

its original position. Verify that the valve is assembled correctly

in the hole of the door. Once assembled push down

and check the tank position with line.

3. Clean the inside and outside of the cover and

cap with dishwashing detergent and rinse

throughly under running water. Dry the water

with a cloth.

2. Clean th inside and outside of the water tank

with dishwashing detergent and rinse throughly

under running water. Dry the water with a cloth.

Water Tank -

1. Remove the tank cover.

4. Assemble the cover with tank and clamp it with

the help of snaps provided, further assemble it

n refrigerator door