Owner's Manual

10
HOW TO REMOVE AND INSTALL THE PULL OUT
DRAWER (CONT.)
2. Installing Pull out Drawer
IMPORTANT: To avoid possible injury, product
or property damage, you will need two people to
perform the following instructions.
• With both hands, hold the center of the bar and
pull it out to let both rails out to full extension
simultaneously. (Fig. 8)
Fig. 8
• Hook door supports into rail tabs, starting in the
back first and then connecting the part in the
front last, as shown in the figure. (Fig. 9)
Rail tabes
Door Supports
Fig. 9
• Lower door into final position and tighten the
screws. (Fig. 10)
Screws
Fig. 10
• Compare the left and right rail covers on each
side. (Fig. 11)
Right
Rail
Left
Rail
Fig. 11
• Align the top holes of the rail cover with the top
holes of the door supports to mount the cover.
(Fig. 12)
alignment
Verify the hole’s
Fig. 12
• With the rails pulled out to full extension, insert
the durabase in the rail assembly. (Fig. 13)
Durabase
Fig. 13
WARNING: To prevent accidental child and pet
entrapment or suffocation risk, DO NOT allow them
to play inside of drawer.
WARNING: DO NOT step or sit down on Freezer
Drawer.
REFRIGERATOR INSTALLATION