Owner's Manual

• Remove the plastic ﬂexible cap from the refrigerator

connection.

• Place the compression nut and ferrule (sleeve) on to

the end of the tubing.

• Insert the end of the tubing into the connection as

far as possible. While holding the tubing, tighten the

ﬁtting.

• Fasten the tubing into the tubing clamp attached to

the back of the refrigerator.

• First, loosen the screw fastening the clamp. Next,

insert the tubing in the groove. Finally, re-fasten the

screw.

10. OPEN THE BYPASS VALVE

Tighten all connections containing leaks. Place access

cover back on compressor.

11. CONNECT TO REFRIGERATOR

Fix pipeline in a way that

it does not vibrate on the

refrigerator or wall. Push

refrigerator against wall.

12. TURN ICE MAKER ON

Turn ice maker switch into the ON position. Ice maker

will start only after reaching its operating temperature

of 15 °F (-9 °C) or less. It will automatically begin the ice

production if switch is located in the ON position.

CONNECTING THE WATER LINE

Refrigerator

Ferule

Handle

(Grabbers)

Compression

Nut

1/4" (6,35 mm)

Pipeline

Connection

1/4" (6,35 mm)