Owner's Manual
8
HOW TO REMOVE AND INSTALL REFRIGERATOR DOOR (CONT.)
2. Refrigerator Door Reinstallation
Install the right-side door first.
X Right Door
• Lower the door onto the middle hinge pin (1).
• Make sure the door is aligned with the cabinet.
• Fit the top hinge (2) over the hinge lever latch (3) and into place. Rotate the lever (4) counterclockwise to secure
the hinge.
• Hook the tab on the door-switch side of the cover (5) under the edge of the wire opening in the cabinet top.
• Position the cover into place.
• Insert and tighten the cover screw (6).
X Left Door
• Lower the door onto the middle hinge pin (7).
• Make sure the door is aligned with the cabinet.
• Fit the top hinge (8) over the hinge lever latch (9) and into place. Rotate the lever (10) clockwise to secure the
hinge.
• Install the grounding screw (11) and connect all the wire harnesses (12).
• Push the water supply tube (13) into the hole on the top case and pull it through the backplate.
REFRIGERATOR INSTALLATION
9
8
Connecting tube color
Blue to Blue
White to White
•
•
Disassembly:
1. Pull out tube while pressing
collets and disassemble it.
Assembly:
1. Insert tube until you can see only one line.
2. After inserting, pull out tube to check if it’s
properly inserted.
Caution