Owner's Manual

125
Wireless network settings
A wireless network can be added
either when the network is detected
or manually by entering settings
information. Before doing these
steps, determine if you need
authentication information.
Tap Start > Settings >
Connections tab > Wi-Fi >
Wireless tab.
Under Networks to access,
select All available, Only access
points or Only computer-to-
computre for the list, depending
on the type of networks to which
you connect.
Do one of the following
- If you do not see a desired
network, tap Menu > Add New.
- To change network settings
for a network you have already
configured, tap the network.
1
2
3
Proceed through the wizard
to the Configure Network
Authentication page.
- Select the authentication
method from the
Authentication list.
- To use data encryption, select
an encryption method from the
Data encryption list.
- To use a network key
automatically, tap The key
is automatically provided.
Otherwise, enter the network
key.
4