INSTALLATION CONTENTS ............................................ FEATURE CHART OPERATION ........................................ .................................................. 3 4 5 Starting Temperature Ice Control Making Chilled Compartment Defrosting Deodorizer (Optional) SUGGESTIONS ON FOOD STORAGE CLEANING .................................................... GENERAL INFORMATION LAMP REPLACEMENT .......................... ............................. IMPORTANT WARNINGS .....
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE LATEST IN TECHNOLOGY. WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE AND RELIABILITY. BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY. IT PROVIDES EXACT INSTRUCTIONS FOR MAINTENANCE, INSTALLATION, OPERATION, AND AND ALSO SUPPLIES SOME USEFUL HINTS. INSTALLATION SELECT A GOOD LOCATION 1. Place your 2. Avoid refrigerator where placing the sources, direct it is easy to NEXT 1. use. 3.
FEATURE CHART FREEZER COMPARTMENT Twisting Ice Serve (Option) General Type Ice Making or Freezer Freezer Door Rack Temperature Control Knob REFRIGERATOR COMPARTMENT Egg Storage Rack Chilled Compartment Refrigerator Temperature Electronic Control (GR-292 only) Lamp Deodorizer (Optional) Refrigerator Vegetable Drawer keep fruits and vegetables, etc. fresh and crisp. Door Rack Used to Leveling Screws Cover Lower (Optional) NOTE All parts shown may not be included with every model.
OPERATION STARTING When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before operating temperatures restarting. TEMPERATURE CONTROL REFRIGERATOR setting of the temperature control refrigerator compartment is NORMAL. The default You can set the button for the refrigerator temperature using the Refrigerator Temperature Control. Whenever Ref.
OPERATION ICE MAKING Determine which type General ice-making system you have. Type Ice To make ice cubes, fill the ice tray with place it on the ice cube box. Then insert the ice cube box in the freezer compartment. To Ice Cube Box ice cubes, hold the tray at its ends and remove twist Trays water and gently. Twisting Ice Serve Type To make ice insert in its cubes, fill the ice tray with water and Ice position.
OPERATION CHILLED COMPARTMENT When the door is opened, the warmer air doesn't influence can keep food fresher in it. the fresh meat. You DEFROSTING Defrosting takes place automatically. The defrosted water flows down to the refrigerator and is DEODORIZER By using a odor of food in the fresh food is guaranteed. compartment is deodorized with no harm to you and the food. use As the catalyst is located in need to touch it.
SUGGESTIONS ON FOOD STORAGE STORING FOOD Store fresh food in the refrigerator compartment. How food is frozen and thawed is factor in maintaining its freshness and flavor. Do not store food which goes bad easily at low temperatures, such as an important bananas, pineapples, and melons. Allow hot food to cool lead to higher prior to storing.
CLEANING It is important that your refrigerator be kept clean INTERIOR PARTS to Wash compartment shelves, racks, storage trays, and magnetic door seals prevent undesirable odors. Spilled food should be door wiped up immediately, since it may acidify and stain plastic surfaces if allowed to settle. etc.
LAMP REPLACEMENT 1. Unplug the power cord from the outlet. 2. Remove 3. To refrigerator shelves. remove the lamp cover, insert a slotted driver at the lamp cover and pull it out forwards. of one under hole of the 4. Turn the lamp counterclockwise. 5. Assemble in order of reverse Replacement disassembly. same specification bulb must be the as original.
BEFORE CALLING FOR SERVICE SERVICE CALLS CAN OFTEN BE AVOIDED! IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING CAUSES FIRST PROPERLY, CHECK THESE POSSIBLE : PROBLEM POSSIBLE CAUSES house fuse blown REFRIGERATOR DOES Has NOT OPERATE Has the power cord plug been removed from the electrical wall outlet? REFRIGERATOR OR FREEZER Temperature control not set on proper position. Appliance is placed close to wall or heat source. Warm weather-frequent door openings. Door left open for a long time.
