Owner's Manual

A
lamp
is located as shown in the feature chart.
To
replace
the
lamp, unplug
the
refrigerator
from its electrical
outlet,
turn
the
lamp
counterclockwise after
removing
the lid as shown in the
figure,
and
replace
it with a
lamp featuring
the same characteristics.
DO NOT USE
AN
EXTENSION CORD
If
possible,
connect the
refrigerator
to its own indi-
vidual electrical outlet in order to avoid an overload
caused
by
other
appliances
or household
lights
that
might interrupt
the electrical current.
POWER CORD REPLACING
INSTRUCTIONS
If the
supply
cord is
damaged,
it must be
replaced
by
a
special
cord or
assembly
available from the
manufacturer or its service
agent.
ABOUT
GROUNDING(EARTHING)
Grounding(earthing)
reduces the risk of electric
shock
by providing
an
escape
wire for the electric
current in case of an electric short circuit.
Improper
use of the
grounding plug may
cause an
electric shock. Check with a
qualified
electrician or
a service
person
if the
grounding
instructions are
not
understood,
or if
you
have doubts on whether
the
appliance
is
properly grounded.
8
LAMP
REPLACEMENT
IMPORTANT WARNINGS
An
empty refrigerator
constitutes a
very
dan-
gerous
attraction to children.
Do not
forget
to remove the door from unused
refrigerator.
CAUTION: THIS APPLIANCE MUST BE
GROUNDED.
Do not store inflammable
materials,
explosives
or chemicals in the
refrigerator.
Do not touch the frozen
surface,
especially
if
your
hands are wet or
damp.
It
may
cause
frostbite.