BOTTOM FREEZER REFRIGERATOR User's Guide Please read this guide thoroughly before operating and keep it handy for reference at all times. CONGELATEUR INFERIEUR REFRIGERATEUR Guide d'Utilisation et d'Entretien Veuillez lire ce conservez-le a manuel en portee de entier avant de mettre en marche l'unite et la main pour le consulter a tout moment.
Version English French Version Spanish Glide N Serve 20 34 Modular Door Bin 20 66 Dairy 2 Version Instructions 3--4 Parts and Features 5 Safety Refrigerator Installation Your Egg Bin Box 21 (Optional) 21 (Optional) u Freezer section 6--13 Tilting Door 21 (Optional) 6 Ice Bin Installation 6 Tilt-Out Door Basket Base Cover 6 Durabase 22 Durabase Divider 22 Pull out Drawer 22 Unpacking Refrigerator Removing and Replacing Refrigerator Handles Your and Doors 21
This guide contains many This is the that All can important safety safety kill or alert symbol. hurt you or Always messages. read and obey all safety messages. It alerts you to others, safety messages that inform you of hazards damage to the product. or cause messages will be preceded by the safety alert DANGER, WARNING, CAUTION. These words mean: safety symbol and the hazard signal You will be killed or seriously injured if you don't follow instructions.
Child entrapment and suffocation are BEFORE YOU THROW AWAY not problems of the past. Junked or abandoned refrigerators are still dangerous...even if they will sit for just a few days. If you are getting rid of your old refrigerator, please follow the instructions at right to help prevent accidents. YOUR OLD REFRIGERATOR OR FREEZER ? ? Take off the doors. Leave the shelves in that children may not climb inside.
PARTS AND FEATURES A M N L B B H C I D J E F K G Use this page to become your convenience. NOTE: This have more familiar with the parts and features. Page references are covers several different models. The refrigerator you have purchased may all of the items listed below. The locations of the features shown below may not guide some or match your model.
INSTALLATION 1. To avoid Excessive Use two Weight people or more to compensate for Failure to do so can result in back or other injury. UNPACKING YOUR REFRIGERATOR 2. or high, cooling ability any remaining tape or glue, rub the briskly with your thumb. Tape or glue residue also be removed a amount of Do not use tape or glue.
HOW TO REMOVE DOOR HANDLES To move refrigerator through a house door, it maybe necessary to remove the refrigerator door handles. NOTE: Handle appearance may vary from illustrations on this page. 1. Removing Refrigerator Handle the handle Grasp ? with tightly both hands and slide the handle up some The ? (1)(this force). keyhole slots require may (2) on the back of the handle allow the handle to separate from the mounting screws (3).
HOW TO REPLACE DOOR HANDLES NOTE: Handle appearance may vary from illustrations on this page. 1. Door Handle Replacing Refrigerator Align keyhole ? slots (1) on the top and bottom of the back of the handle with the screws (2) mounted on the front of the door. Press the handle against the door front, making sure that the screws (2) go into the keyhole slots (1). ? ? Holding the handle with both hands, press it firmly against the front of the door and slide the handle down (3).
HOW TO REMOVE REFRIGERATOR DOOR 1. Removing Refrigerator Door NOTE: Handle appearance may vary. IMPORTANT: Before you begin, turn the from doors. refrigerator OFF and unplug it. Remove food and any bins u Left Door ? Loosen the ? Disconnect door switch wire ? Remove the cover screw (1). ? (2) and wire harness (3). ground screw (4). Rotate the lever hinge (5) counter clockwise and lift off the top hinge (6). Raising it up enough to clear the middle hinge pins.
2. u ? Replacing Refrigerator Right Door Door Lower the door onto the middle hinge pin (7). ? Make sure the door is aligned with the cabinet. ? Replace the top hinge (6) by rotating the lever hinge (5) counter clockwise to ? Make sure is flush the secure against gasket on 7 it. the door the cabinet and is not folded. ? 8 Support the door on the handle side while securing. And make sure the door is straight and the gap between the doors is across the front.
HOW TO REMOVE AND INSTALL ? and THE PULLOUT DRAWER IMPORTANT: To avoid or perform 1. ? possible injury property damage, you will need the following Removing With both two hands, hold both sides of the door separate it from the rails. it up to pull or product people to instructions. Pullout Drawer Pull the drawer open to full extension. Remove the lower basket (1) by lifting basket from rail system. (If you ? tilt the Press both door, it will be easier.
HOW TO REMOVE AND INSTALL ? IMPORTANT: To avoid or perform 2. ? possible injury property damage, you will need the following sure two you have a rail right or product people to cover for each Right Rail Cover instructions. Left Pullout Drawer Installing With both Make side. THE PULLOUT DRAWER Rail Cover hands, hold the center bar and push it out to let both rails out to full extension simultaneously.
LEVELING AND DOOR ALIGNMENT Door Leveling If the space between your doors is uneven, follow the instructions below to align the doors: Your refrigerator has two front leveling screws--the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below: 1. With one on 1. Plug the as refrigerator's power cord grounded refrigerator into its final lower it.
USING YOUR REFRIGERATOR ENSURING PROPER AIR SETTING THE CONTROLS CIRCULATION ? In order to ensure flow between the proper temperatures, air refrigerator must and freezer sections. As shown in the illustration below, air top of freezer and circulates down. From bottom of freezer, air is forced up to top of refrigerator.
ADJUSTING CONTROL SETTINGS FOOD STORAGE GUIDE Give the refrigerator time to cool down completely before making final adjustments. It is best to wait 24 hours before doing this. The mid-settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. Wrap or store food in the refrigerator in airtight and moisture-proof material unless otherwise noted.
STORING FROZEN FOOD Freezing NOTE: For further information about food for freezer Your freezer will not preparing freezing or food storage times, guide or a reliable cookbook. check quantity a freezing depends packaging.
USING YOUR REFRIGERATOR w CAUTION: Make REFRIGERATOR SECTION from The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model Sliding may have You or wire shelves. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the level are falling or spilling so food. slide as glass shelves in and out of your follows. ? To slide the shelf out, shelf toward you.
USING YOUR REFRIGERATOR u OPTIBIN CRISPERS Crispers To remove with rails crisper: 1. Pull drawer out to full extension. 2 2. Lift the front of basket up and pull straight out. 1 The Optibin Crispers provide fresher-tasting fruit vegetables by letting you easily control humidity inside the crisper. The Optibin Crispers include: 1) a humidity control knob at the front of the crisper cover and 2) a large lattice on the inner and surface of the cover to hold or release moisture.
To remove crisper 1. Raise the door 2. Press the door flap door flap as INNER SURFACE it will open. toward the center of the plastic hinge finger. To the lattice remove inner surface: on with your 3. Lift the door out of its 4. To CRISPER COVER WITH LATTICE ON flap: high as replace, reverse place. above procedure. 1. Remove crisper 2. Hold the glass cover cover (as illustrated and turn the above). crisper cover over. 3.
USING YOUR REFRIGERATOR GLIDE N SERVE The Glide N Serve provides storage space with temperature control that keeps the compartment colder than refrigerator temperature. The drawer also features a self- a variable opening lid that pulled open. This drawer items, or opens whenever the drawer is can be used for large party trays, deli beverages. Food storage guide in Glide N Serve NOTE: DO NOT store lettuce produce or other leafy in this drawer.
USING YOUR REFRIGERATOR DAIRY BIN 1. To straight 2. To ICE BIN (Optional) the remove dairy bin, simply lift it and 1. To pull replace separate the ice bin, pull much out. the dairy bin, slide it in above the push down until it stops. 2. desired location and as Gently 3. To lift and install, pull possible position, out the drawer possible. pull out the ice bin. out the drawer as much as and set the ice bin in its correct then push in the drawer.
Tilt Out Door Basket - DURABASE DIVIDER (Optional) The Durabase divider allows you to Durabase area into sections. Tilt-out Door Basket You foods can remove easily by tilting wire basket in the freezer organize the out the compartment. 1. To remove, pull the bracket upward until you hear a clicking sound and remove the wire rack. 2. To replace, hook the end of the rack in the bracket, and push down until it locks into place. 1. To remove, 2.
CARE AND CLEANING PLASTIC PARTS w WARNING and (covers Do not use window sprays, abrasive flammable fluids. These can scratch the material. panels) cleansers, or damage or CONDENSER COILS Remove base Explosion Hazard or so can result in (See the base cover section on Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month. Use non-flammable cleaner. Failure to do cover. page 6.
To the freezer change Unplug refrigerator 2. Using a cover loose in the front flat sure remove as the shown. Rotate rear Replace with 5. Insert tabs ceiling. prepare your tabs. on Push a new back of cover 40-watt cover remove. appliance 2. bulb. before you leave. and freeze other perishables the ice bin. Empty If you choose to turn the refrigerator off before you leave, follow these steps. into slots in freezer up to snap front into refrigerator 1. Use up any items.
NOTE: If the cube size is smaller you expected, you cube size button. Personal Injury Hazard Every can regulate or larger than the size with the time you press the cube size button, the moves up on light. The higher the light Avoid contact with the indicator element that releases the cubes. DO NOT position, the larger the cubes will be. Pressing highest position returns indicator to lowest position.
BEFORE YOU BEGIN ? This water line installation is not warranted refrigerator or diameter the water carefully damage. and 2 ferrules to minimize the risk of (sleeves) Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator. To prevent burns and product damage, do ? tubing refrigerator water valve.
7. CONNECT THE TUBING TO THE INSTALLATION INSTRUCTIONS VALVE (CONTINUED) Place the compression nut and ferrule (sleeve) for copper tubing onto the end of the tubing and connect it to the shutoff valve. Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely. 4. FASTEN THE SHUTOFF VALVE Fasten the shutoff valve to the cold water with the pipe pipe clamp.
CONNECTING THE WATER LINE 9. CONNECT THE TUBING TO THE 10. TURN THE WATER ON AT THE REFRIGERATOR Removing and SHUTOFF VALVE Replacing Valve Cover Tighten any connections that leak. Reattach the compressor NOTE: compartment access cover. ? 1. Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet. Remove the plastic flexible cap from the water valve. 2.
UNDERSTANDING SOUNDS YOU ? The defrost timer will click when the automatic defrost cycle begins and ends. The thermostat control (or refrigerator control, depending on the model) will also click when cycling on and off. ? Rattling noises may come from the flow of refrigerant, the water line, or items stored on top of the refrigerator. Your refrigerator is designed to run more efficiently to keep your food items at the desired temperature.
Check if... COMPRESSOR MOTOR SEEMS TO RUN TOO MUCH Then... The refrigerator that an older model. The room normal. was replaced was temperature is hotter than u Modern refrigerators with more storage space require more operating time. u The motor will run longer under warm conditions. At normal room temperatures, expect your motor to about 40% to 80% of the time. Under warmer conditions, expect it to run even more often.
Check if... ICE HAS OFF- Then... The icemaker recently was installed. TASTE OR ODOR u Discard first few batches of ice to avoid discolored The ice has been stored for too long. off-flavored ice. or u Throw away old ice and make new supply. The food has not been in either The water such as wrapped tightly supply contains minerals sulfur. The interior of refrigerator needs THERE IS refrigerator is u See Care and Cleaning section u Empty and wash bin. Discard old cubes.
Check if... Then... The air vents circulates from the freezer to the fresh sense OR THERE IS food section and back that block vents and restrict airflow. INTERIOR air vents in the wall MOISTURE sections. BUILDUP The doors are blocked. Cold air u Locate air vents by using your hand to TEMPERATURE IS TOO WARM again through dividing the two airflow and move Refer to Multi-Flow on all packages page 14 for the location of air vents. are opened u When the door is opened, often.
