Owner's Manual

12
REFRIGERATOR INSTALLATION
HOW TO REMOVE AND INSTALL
THE PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product
or property damage, you will need two people to
perform the following instructions.
2. Installing Pullout Drawer
• With both hands, hold the center bar and push
it out to let both rails out to full extension
simultaneously.
• Hook door supports (1) into rail tabs (2).
• Lower door into final position and tighten the
screws (3).
• Make sure you have a right rail cover for each
side.
• Align the top holes of the rail cover with the top
holes of the door supports to assemble the rail
covers.
• With the drawer pulled out to full extension,
insert the lower basket (4) in the rail assembly.
w WARNING: To prevent accidental child and
pet entrapment or suffocation risk. DO NOT
allow them to play inside of drawer.
w WARNING: DO NOT step or sit down on
freezer door.
Right
Rail Cover
Left
Rail Cover
Assembly Hole