Owner's Manual

USING YOUR REFRIGERATOR
SETTING THE CONTROLS
Temperature
• Your refrigerator has a control pad on the
dispenser that lets you regulate the temperature
in the freezer and refrigerator compartments.
• Initially set the REFRIGERATOR CONTROL at
3°C and the FREEZER CONTROL at –18°C.
Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment
temperature as desired.
• Every time you touch the freezer temperature
adjust button, the temperature changes in a
circulating order of “-13”→“-14”→“-15”→“-16”→
“-17”→“-18”→“-19”→“-20”→“-21”→“-13”.
• Every time you touch the refrigerator
temperature adjust button, the temperature
changes in a circulating order of
“0”→“8”→“7”→“6”→“5”→“4”→“3”→“2”→“1”→“0”.
w CAUTION: The control display is operated by
touch. Excessive moisture on the display may
cause a malfunction. Please keep display clean
and dry.
NOTE: This is to prevent the unintended working
error when touching again. When 10 seconds has
passed since final touch, the existed display
blinks once and then the key starts to work by
second touch.
EXPRESS FRZ.
• When you touch the “EXPRESS FRZ.” button,
the graphic [ ] will light up in the display and it
continues for 24hours. It will automatically shut
off after 24hours have passed.
Or you can stop this function manually by
touching the button one more time.
• This function imcreases both icemaking and
freezing capabilities.
Dispenser
• You can select water, crushed ice, or
cubed ice by touching button as
you desire.
• There could be some dripping after
dispensing.
It is recommended to hold your cup
for a couple of seconds after
dispensing.
NOTE : The dispenser is desinged not to operate
while either refrigerator door is left open.
Filter
• It displays in months the number of months left
to exchange the filter from the moment power is
connected to the refrigerator.
• If you have changed the filter after 6 months of
use or want to reset the filter display, press and
hold the Filter Reset Button 3 seconds or more
and the filter display will be initialized with a
buzzing sound.
NOTE : The average life of the filter is 6 months.
Alarm
• When the power is connected to the refrigerator,
door alarm is initially set OFF and door alarm
display will show . When you touch
button, the display will change to and door
alram function is now activated.
• When either refrigerator or the freezer door is
left open for more than 60 seconds, the alarm
will ding to let you know the door is open.
• When you close the door, the door alarm will stop
dinging.
• If you want to disable the door alarm function,
touch button then the door alarm display
will switched to .
Lock
• When the power is initially connected to the
refrigerator, Lock Function is Off.
• If you want to activate Lock Function to lock
other buttons, press and hold button for 3
seconds or more. sign will be displayed and
the Lock Function is now enabled.
• No buttons except and dispenser button will
work while lock function is enabled.
• To disable the Lock Function, press and hold
button for 3 seconds or more.
ENSURING PROPER AIR CIRCULATION
Do not block air channels with any objects or food
for air circulation to prevent food loss due to the
lack of cooling air.
14