Owner's Manual

CONTROLS FOR REFRIGERATOR COMPARTMENT
To control the
Refrigerator
temperature, press
the REF TEMP
button.
The
temperature
is set in 5
steps,
from MIN to MAX
cooling.
(Min
=
warmest,
MAX
=
coldest
temperature.)
OPERATIONS
5
STARTING
When
your
refrigerator
is first
installed,
allow it 2-3 hours to stabilize at normal
operating
temperatures
prior
to
filling
it with fresh or frozen foods.
If
operation
is
interrupted,
wait 5 minutes before
restarting.
LAMP
AUTO OFF FEATURE
When the door is
open
for 7 minutes or
longer,
the
lamp
inside
goes
off
automatically
to save
energy
and
prevent
overheating.
However,
the alarm sound continues until the door is closed.
BEFORE SETTING
THE
TEMPERATURE
The
temperature
of the
refrigerator
is
kept
constant
regardless
of
changes
in room
temperature.
It is recommended
that,
once
set,
the
temperature
settings(the
controls for the
refrigerator
and
freezer
compartments)
not be
changed
unless
necessary.
This
refrigerator
has one
temperature
control button for the
refrigerator
compartment
and one
temperature
control dial for the freezer
compartment.
The default
setting
of the
temperature
control button for the
refrigerator
compartment
is 'Normal'.
The default
setting
of the
temperature
control dial for the freezer
compartment
is '3'.
This
refrigerator
has a
temperature
sensor in the
refrigerator
compartment.
It will start and
stop
the
compressor automatically
as needed.
DOOR
ALARM
When the door of the
refrigerator
or the freezer is
open
for 1
minute,
an alarm will sound three. It the door
remains
open,
the alarm will
repeat every
30 seconds.
SELF TEST
Your
refrigerator
contains a built in
diagnostic
capability.
If it
develops
a malfunction in certain
areas,
it will
display
an error code to assist the
repair
technician. While an error code is
displayed,
other control and
display
functions will not
operate.
If an error code is
displayed,
contact a service center. Do not disconnect the
power
cord from the outlet.