Super Multi DVD Rewriter GSA-H22N EnglishDeutcFraIopP
CAUTION The laser used in the : Multi DVD Rewriter Super can damage your eyes. Do not attempt to open the cover. To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to Use of controls or qualified service personnel. performance of procedures other than those specified herein may result in hazardous radiation exposure.
This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG ABNING. ADVARSEL : UNDGA : APENS. : EKSPONERING FOR LASERSTRALNING STRALEN AR FARLIG. AR OPPNAD. NAKYVA JA NAKYMATON LASERSATEILYLLE. ALA KURSSI 3B ALTTIINA The appliance supervision.
Contents Features........................................................2 ImportantPrecautions.............................................2 SystemEnvironment..............................................3 LocationandFunctionofControls...................................4 InstallingtheDrive................................................5 DeviceDrivers...................................................8 HowtoUsetheDiscs.............................................9 Troubleshooting.......................
Features Enhanced-IDE ? (ATAPI) interface. tray loading and ejection of disc. (The disc CD-R/RW, DVD-R/RW, DVD+R/RW, ? Power ? Combination ? Supports Region playback control Phase II. ? Automatic buffer underrun error DVD-RAM functions into one can also be DVD-R ejected manually.) DL, DVD+R DL, drive. prevention technology.
System Environment Computer This unit can be operated in the system environment explained here. System requirements VGA Card Memory CPU: Pentium III 1.0GHz (Recommanded system requirements for optimal performance, CPU: Pentium IV 2.4GHz or faster, Memory: 512MB or greater) Hard disk 20GB 128MB or greater. free space. free space needed for or more writing depends on the quantity of data.) (as Primary Slave, Secondary Master or Slave) Drive bay 5.
Occasionally * CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other CD drives*. These unreadable discs may need to be read using the CD-R/RW drive they were created with The disc written using the CD-R/RW drive might not be readable by CD-ROMs other than Multi-read Multiread compatible (UDF compatible) compatible (UDF compatible) 1. CD-ROMs that CD-ROMs CD-ROMs read low reflectance. are: support Packet Write. (i.e.
the Drive Installing Before the installing drive, please You will need the A ? The manual for the screw note the following points. following: ? driver of a suitable size to fit the computer, so securing screws find the can you for the drive unit. for the mounting positions IDE controller cable. Turn off all peripheral appliances of the computer and the computer itself, disconnect their power cords from the wall sockets.
NOTE : If than jumper should be installed on the jumper connector. jumper is installed, the drive may malfunction or be damaged. setting is determined by jumper installation on the Jumper Connector. following table shows the possible jumper settings.
To Install as a Slave Drive To install the drive as a Slave, change the jumper setting Master drive (Booting hard the on rear Master drive disk) (Booting panel to SL.
Connecting If the the Sound Card computer is using a sound card, the drive is connected to the sound card supplied analog audio cable fits most sound cards or one can local computer store. audio cable. The purchased at a with an be Refer to the manual for the sound card for detailed information regarding marking this connection. L-R Replacing the Computer Cover LR When the installation of the drive unit is complete, replace the computer cover.
How to Use the Discs When using CD-ROM discs, CD-R discs, DVD discs or CD-RW discs, don't attach any stickers or labels to the discs. It could cause read and write errors, but data the disc may be lost due to damage to the disc itself. on The Discs in this unit operate at a very high speed! DO NOT use damaged, cracked or warped discs. The drive's optical unit may be damaged if they break. DO NOT non-standard discs. NON-standard discs may not use play or store data properly.
Troubleshooting Before Before Service Requesting calling for service, check this list. The drive doesn't have power. ? Is the power supply cable from the host ? ? Is the Power Connector to the drive The ? ? system doesn't start.
Specifications Items General Supported DVD-ROM(Single/Dual), DVD-RW, DVD-R, DVD-R DL, DVD+RW, DVD+R, DVD+R Double layer, DVD-RAM, CD-Digital Audio & CD-Extra, CD-Plus, CD-ROM, CD-ROM XA-Ready, CD-I FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW, Photo-CD (Single & Multi-Session), Video CD, DVD-Video Discs Disc Diameter 12cm/ 8cm (8cm Host Interface E-IDE/ATAPI Read/Write Write Speed disc can be used (Ver.2.0 Mounting direction & 16.6 *Burst(ATAPI) 66.
Copyright ⓒ 2006 Caution! LG Electronics U.S.A. Inc. Sylvan Ave. Englewood Cliffs NJ The disc rotates at high speed in the drive unit. Use of worn, damaged, or non-standard CD-ROM discs can adversely affect the drive 1000 07632 U.S.A. or and http://www.lgusa.com LG Electronics Canada Inc. 550 MATHESON Blvd. East Mississauga.
