Owner's Manual

20
Getting Started
Touch Calibration
After you install SIM card
and battery, and turn on
the LG-GW382f, you will be
prompted to calibrate the touch
screen on your LG-GW382f.
Touch the "+" markers as they
appear to calibrate the screen.
Once you've finished •
calibrating your screen, Save
the settings.
Vibration Mode (Quick)
Activate Vibration Mode by
touching and holding on
the dial pad. You can also adjust
Vibration Mode by pressing and
holding the side volume keys.
The phone will display "Vibrating
Mode On". If you want to turn
Vibration Mode Off, touch and
hold
again.
Signal Strength
If you are inside a building, you
may get better reception close
to a window. The signal indicator
on your phone's display screen
shows you the strength of the
signal.
Dial Pad
Use the phone's touch pad to
dial numbers from standby mode.
Options
While the touch dialling pad is
displayed you can select further
options such as Make Video
Call, New Message, Hard
Pause, 2-sec Pause, Touch
Calibration by touching the left
soft key.
If you want to close the Dial •
pad, press dial pad icon and
then dial pad is disappear. But
you can still use the Options.
And you can also use Save by
touching the right soft key.
GW382f_Telstra_1.1_110426.indd 20 4/26/11 9:47:48 AM