ENG DEU FRE DUT SLN ITA SPA SMART Hi-Fi AUDIO Wireless Multi-room Model : NP8340 / NA9340 NP8340B / NA9340B NP8340W / NA9340W NP8340D / NA9340D ENGLISH | SIMPLE MANUAL The actual product may differ from the image.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or rear of the apparatus. CAUTION : Do not use high voltage products around this product. (ex. Bug Zapper) This product may malfunction due to electrical shock. Check the specification page of this owner’s manual to be certain of the current requirements of this device. Do not overload wall outlets.
Getting Started Declaration of Conformity 1 Getting Started Hereby, LG Electronics European Shared Service Center B.V., declares that this Wireless Multi-room Audio is compliant with the essential requirements and other relevant provisions of Directive 1999/5/EC. The complete Declaration of Conformity may be requested through the following postal address: LG Electronics European Shared Service Center B.V.
Getting Started 5 Disposal of your old appliance 1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. 1 Getting Started 2.
Table of Contents Table of Contents 1 Getting Started 2 8 9 10 Safety Information Unpacking Top Panel Rear Panel 2 Using Multi-Room 11 11 12 Multi-Room Network Setup – Step 1. Home Network Requirement – Step 2. Installing “Music Flow Player” App and Media Server – Step 3. Initial Multi-Room Setup – Step 4. Add Speakers (Optional) – Using the Bridge Enjoying Multiple MUSICflow Product – 1. Home Cinema Mode (Surround Sound Mode) – 2. Grouping Mode – 3.
Table of Contents 3 Using External device 25 25 Using External device – BLUETOOTH® connection 4 Troubleshooting 26 Troubleshooting 5 Appendix 31 32 33 About Status LED’s Condition Specification Open Source Software Notice Information 7 1 2 3 4 5 yy To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.
Getting Started Unpacking 1 Getting Started Power cord Unit LAN cable Simple Manual yy Depending on the region, the supplied accessories may differ.
Getting Started 9 Top Panel a b 1 Getting Started c d e f a 1/!/F button - Power On / Changing the mode - Switching to the standby mode b Volume wheel Turn the wheel clockwise to increase volume, or counterclockwise to decrease volume.
2 10 Getting Started Rear Panel 1 Getting Started b a a POWER IN b button Connects initial MUSICflow product to your network wirelessly. c d c button Adds additional MUSICflow products to your network.
2 Using Multi-Room Using Multi-Room 11 Multi-Room Network Setup Step 1. H ome Network Requirement a d c a Make sure that a wireless network environment using a router is installed at your home. The home router should be connected to the internet. b Connect your smart device to your home network. c Connect the speaker to the power supply. d If you want to enjoy the music on media server (PC, Mac or Network Storage), connect the media server to your home network. .
Using Multi-Room Step 2. Installing “Music Flow Player” App and Media Server Installing “Music Flow Player” App Download “Music Flow Player” on the App Store or Google Play Store. 2 A B Using Multi-Room OR A Type “Music Flow Player” in the search bar and tap “Search”. B Scan the QR code using the scanning application. , Note for “Music Flow Player” App yy Depending on the device, “Music Flow Player” app may not work.
Using Multi-Room 13 Installing Media Server software on your PC or Mac Media server software allows you to access audio files stored in media server (PC, Mac or Network storage) and enjoy them on your speaker via home networking. On www.lg.com website, type model name in the search bar and find media server software on support tab. yy Windows : Music Flow PC Software , Note for using Media Server yy On your PC or Mac, you must share the folder contained Audio content to play them on MUSICflow system.
Using Multi-Room Step 3. Initial Multi-Room Setup When installing the MUSICflow product for the first time, you can choose two types of connection as below. Option 1. Wired connection (MUSICflow Mesh Network Connection) 2 Connect the one of MUSICflow products (sound bar, speaker or bridge) to the home router using LAN cable. Using Multi-Room Then you can connect the additional MUSICflow products (Optional) to your home network wirelessly (MUSICflow Mesh Network). Refer to “Step 4.
Using Multi-Room 15 Simple Setup Guide (Wired Connection) 1. Ensure that your smart device is connected to your Wi-Fi network. 2. Select the product you want to connect. 3. Launch Music Flow Player App and follow “Wired Connection” instructions on set-up wizard. 4. Connect LAN cable from router to any one of MUSICflow product (sound bar, speaker or bridge). 6. If you install successfully, update speaker software to the latest: [Home à Settings à Version Info.
Using Multi-Room Option 2. Wireless connection (Standard Wireless Connection) When the wired connection is unavailable between MUSICflow products and home router, MUSICflow products offer music streaming service within home router’s Wi-Fi coverage. 2 Connect one of the MUSICflow products (sound bar, speaker) to the home router wirelessly. Using Multi-Room (Option) Then you can connect the additional MUSICflow products to your home Wi-Fi network wirelessly. Refer to “Step 4.
Using Multi-Room 17 Simple Setup Guide (Wireless Connection) 1. Ensure your smart device is connected to your Wi-Fi network. 2. Select the product you want to connect. 3. Launch Music Flow Player App and follow “Wireless Connection” instructions on set-up wizard. 4. Press (Wi-Fi Setup icon) button at the back or top of the MUSICflow product (sound bar, speaker or bridge). 6. Please input the password of Home Router for connecting MUSICflow product to home router.
Using Multi-Room yy If the router’s performance is not good enough (ex. 802.11g 2.4 GHz), sound may be broken in group play or surround playback mode. In this case, connect the speaker in MUSICflow Mesh Network. 2 m Tip Offers music streaming service in MUSICflow system within home router’s Wi-Fi coverage. In the below case, Standard wireless connection is recommended. Using Multi-Room 1. When all speakers are within the home router’s Wi-Fi coverage. (If case that your home router supports 802.11n 2.
Using Multi-Room 19 Step 4. A dd Speakers (Optional) If you connect the initial MUSICflow product to your home network, you can connect the additional MUSICflow products (sound bar, speaker or bridge) to your home network. 2 Using Multi-Room Simple Setup Guide (Add Speakers) 1. If you have additional speakers, power on the speaker. 2. Launch smart device or PC application and follow instructions on set-up wizard. [Home à Add Speakers] 3.
Using Multi-Room , Note for Multi-Room Setup yy You can make all wireless/wired connection according to the location of the router. But we recommend that you connect the first speaker or bridge to the router using LAN cable and connect additional speakers for network stability. yy When the “Firmware update”pop-up appears on Music Flow Player App, touch to start updating.
Using Multi-Room 21 Using the Bridge 1. Use as a root device (wired to the home router) When your home router is located too far from any speaker location that is to be connected via wired mode: b According to “Simple Setup Guide (Add Speakers)“, add MUSICflow products to your home network. b a Bridge 2 Using Multi-Room a According to “Simple Setup Guide (Wired Connection)”, connect the Bridge to your home router with LAN cable.
Using Multi-Room 2. Use as a wireless extender When you want to expand MUSICflow mesh network coverage: Preparation: Initial MUSICflow product is connected to your home router with LAN cable. a According to “Simple Setup Guide (Add Speakers)“, add the Bridge to your home network. 2 b According to “Simple Setup Guide (Add Speakers)“, add MUSICflow products to your home network.
Using Multi-Room 23 Enjoying Multiple MUSICflow Product 1. H ome Cinema Mode (Surround Sound Mode) If you have a bridge Bridge (Wired Connection) à Sound bar (Add speaker) à Other speakers (Add speaker) If you do not have a bridge Sound bar (Wired Connection) à Other speakers (Add speaker) , Note If you connect the MUSICflow Speakers to your Home Cinema, those speakers must be same model.
Using Multi-Room 2. G rouping Mode Speakers placed in separate rooms can play the same music or different music based on your needs. Synchronize your multi-room speakers together to play the same song in every room. 2 Requirement yy More than 2 MUSICflow Using Multi-Room yy Network Bridge (optional) 3. L /R Stereo Mode Set your speakers to stereo sound with Music Flow Player Apps to enjoy movies and your favourite tracks.
3 Using External device Using External Device 25 Using External device BLUETOOTH® connection 1. Select the Bluetooth mode with 1/!/F button on the speaker. H3 (XX.XX) Music Flow H3 (XX.XX) 3. Play music on your Bluetooth device. NFC for Easy Pairing (Android Only) You can pair simply and easily by tagging on the mark. , Note If you are listening to music using the Music Flow Player app, seamless playback is activated instead of Bluetooth pairing. 3 Using External Device 2.
4 Troubleshooting 26 Troubleshooting Troubleshooting Software Update When the MUSICflow device is connected to your home network, check whether the firmware version is the latest on all speakers and the Music Flow Player application. Your MUSICflow device might require a more recent firmware to be installed for optimal operation. [Settings à Version Info]: You can check if your speaker has the latest firmware.
Troubleshooting 27 2. If you change the location of the speaker that is in use, 2-1. If the changed location is too far from the home router, it may not be connected. Place and use it at a location that is close enough to router. 2-2.
Troubleshooting yy If the device playing the source sound (Ex. phone or laptop) is at a place without fluent home router signal, move the corresponding device closer to the home router and try again. 2.
Troubleshooting 29 3. The sharing may be blocked, so check DLNA server program setting or firewall setting. yy If you are using LG Musicflow PC software, when you designate shared folder, the corresponding folder will be automatically added to Music Library in a minute. LG MUSICflow product is turned off automatically. There are some cases that power off will occur if not receiving sound signal: yy Optical, HDMI ARC, Bluetooth, Wi-Fi (DLNA) mode: if there is no sound signal during 20 minutes.
Troubleshooting How can I use Spotify? LG MUSICflow product supports Spotify connect method provided by Spotify. Through this, you can use the function supported by Spotify by connecting to the speaker through Spotify application. If Music Flow speaker is in the network composed of the same router, Spotify application Speaker shape Icon is changed, and when you press this Icon, you can check and select the speakers in the same network. (When the speaker is selected, the icon changes to green.
5 Appendix Appendix 31 About Status LED’s Condition Bluetooth Color (Off) Status The unit is waiting for Bluetooth pairing (White) (White) The unit is paired to Bluetooth Network Color Status The unit is waiting for network connection (Off ) (White) The initial unit is being connected to the network (White) (Red) button is pressed) Network Status The unit is connected to the network The additional unit is being connected to the network (Off) (Red) (Dimmed Whtie) (Red) ( button is press
Appendix , Note for Status LED’s Condition yy When you set the group at first, Network status LED turns green. yy The additional groups are set, the Network status LED color is changed in group order. [Green > Magenta > Cyan > Blue > Yellow] yy If the grouped speakers switch to the network standby mode, the brightness of Network status LED gets dark. Specification Power requirements: 200 - 240 V ~ 50 / 60 Hz Power consumption: 14 W Networked standby : 5.4 W (If all network ports are activated.
Appendix 33 Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Customer Information Center Country Telephone Austria / Österreich 0810-144131 Slovenia / Slovenija 080-543543 Benelux 0900 543 5454 (NL) 015 200 255 (BE) Schweiz / Suisse / Svizzera / Switzerland 0848-543543 České republiky nebo Slovenské republiky / Českej republiky alebo Slovenskej republiky CZ: 810 555 810 SK: 0850 111 154 Deutschland 01806 11 54 11 España 963 05 05 00 France 3220 Ελλάδα 801 11 200 900 210 4800 564 Italia 199600099 Polska 801 54 54 54 Portugal 808 785 454 Româ