Owner's Manual

Connecting 17
Connecting
2
3. Pull out the tag of the wire.
Step 3
Assembling the speaker
4. Insert the connector to the bottom of the base.
Connect the speaker wire to the terminal on the
bsae.
Make sure the wire marked black goes in to the
terminal marked “–” (minus) and the other wire
goes in to the terminal marked “+” (plus).
Step 4
Bottom of base
Be careful that the speaker
does not fall down.
Otherwise it may result in
the speaker malfunctioning
and causing personal injury
and/ or property damage.
>
Caution