Owner’s Manual
6
ENGLISH
NFC Connection (When the device to be connected supports NFC)
1 Activate the Read NFC Tag mode and Bluetooth function of the device to be connected.
2 Press and hold the Call button and slide the Power switch to the ON position to turn on the power.
3 The blue status Indicator lamp turns on, and the product switches to Search mode.
4 Place the tag of the NFC card to the NFC antenna area of the device to be connected.
(The location of the NFC antenna may differ depending on the product.)
5 In the notification window of the device, press “Yes” to connect the product to the device.
NOTE: If you place the NFC tag of the product against the NFC antenna of the connected
device, the connection is lost. If the connection is lost, place the NFC tag against the
NFC antenna again.
6 Repeat the procedure to connect to another device.
Automatic Reconnection
If you turn on the product, it automatically searches for and connects to the devices
(“Main Connected Device” and “Sub Connected Device”) to which it was previously connected.
(If the product cannot nd the device to which it was connected last time, the product switches
to Search mode.)
If the product does not automatically connect to the device you want, search for your product in the
device you want to connect to and connect it manually.
Indicator Lamp
HBS-1100 Status Description
Power On The blue Indicator lamp ashes four times.
Power Off The blue Indicator lamp ashes four times.
Search Mode The blue Indicator lamp is on.
Headset/Hands-free
Prole Connected
The blue Indicator lamp ashes once every 5 seconds.
Call Connected The blue Indicator lamp ashes once every 5 seconds.