English Español HBS-700 User Manual BLUETOOTH® Stereo Headset Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc www.lg.com Rev 2.0 US All rights reserved. LG Electronics Inc., 2011 Note: Please read all information carefully prior to using HBS-700 in order to prevent damages to the product and to enjoy the best performance.
Introduction ENG - Included in the package 3 3 Description of parts 4 How to use - Wearing - Charging - Low battery - Battery status check - Power on / Power off - Pairing - Multi-connection - Auto reconnect - Audio streaming -Bass Boost - Volume control - Calling • Answering a call • Transferring a call • Voice dialing • Last number redial • Ending a call • Call waiting • Rejecting a call - SMS reader 4 4 5 5 5 5 5 6 7 7 8 8 8 8 8 8 9 9 9 9 9 Summary of button functions 2 Introduction The LG Tone
Description of parts How to use Charging ENG - When the charger is connected, with the power on or off, the headset will turn off. - While charging, the LED indicator will show a solid red light. - When charging is complete, the LED indicator will turn off.
ENG • The LED indicator will be Solid Blue c) On the device you wish to pair, find the bluetooth menu and “serch for” or “add” new devices d) Select “LG HBS-700” From the list of devices e) If asked for a Pass/Pin Code enter 0000 (4 Zero’s) f) Once pairing is complete you will hear a beep • The HBS-700 will automatically turn off if not paired within 3 minutes.
How to use ENG Fast forward - Press and hold the FF button. Rewind - Press and hold the REW button. Last number redial - Press and hold the CALL button for 1 second to activate “Last number redial”. The headset will beep and then call the last number dialled. Bass Boost Call waiting - Answer a second call without hanging up the first call by pressing the CALL button for 1second. Press the CALL button for 1second to return to the original call.
Summary of button functions ENG Move the power switch to the ‘ON’ side. HBS-700 Status Power on Power off Action Power off Power on Move the power switch to the ‘OFF’ side. Volume up Talking Briefly press the VOLUME UP button. Volume down Talking Briefly press the VOLUME DOWN button. Transferring a call Talking Press and hold VOLUME UP button for 3 seconds. Answering a call Ringing Briefly press the CALL button. Ending a call Talking Briefly press the CALL button.
Specification Item ENG ® Description Bluetooth specification 2.1+EDR (Headset / Hands-Free / A2DP Profiles) Battery Battery 3.7V / 195mAh Li-Polymer Talk Time Up to 10Hrs Music play time Up to 10 Hrs Stand by time Up to 360Hrs Charging time < 2.5Hrs Operation temperature -10°C ~ 60°C Dimension / weight 135.6mm(W) X 167.3mm(L) X 16.9mm(T) / 32g Precautions FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules.
ENG 2. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. 3.
Limited warranty ENG Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact centre to get further information.
Introducción ESP - Contenido del embalaje 3 3 Descripción de las piezas 4 Modo de uso - Uso - Carga - Batería baja - Comprobar el estado de la batería - Encendido / Apagado - Vincular - Multiconexión - Reconexión automática - Transmisión de audio - Incremento de graves - Control de volumen - Llamadas • Contestar una llamada • Transferir una llamada • Marcar por voz • Volver a marcar el último número • Finalizar una llamada • Llamada en espera • Rechazar una llamada - Lector de SMS 4 4 5 5 5 5 5 6 7 7
Descripción de las piezas Modo de uso Carga ESP - Retire la cubierta del puerto de carga y conecte el cargador. - Mientras se esté cargando, el indicador LED mostrará una luz roja constante. - Al completarse la carga, el indicador LED se apagará.
ESP c) En el dispositivo que desea emparejar, abra el menú bluetooth y luego “buscar” o “agregar” dispositivos nuevos d) Seleccione “LG HBS-700” en la lista de dispositivos e) Si le pide una contraseña o código pin ingrese 0000 (4 ceros) f) Una vez que el emparejamiento se haya completado escuchará un pitido • El auricular HBS-700 se apagará automáticamente si no se empareja dentro de los 3 minutos.
ESP Siguiente canción - Presione brevemente el botón AVANZAR. Canción anterior - Presione brevemente el botón RETROCEDER. Adelantar - Mantenga presionado el botón AVANZAR. Rebobinar - Mantenga presionado el botón RETROCEDER. Marcar por voz - Pulse brevemente el botón LLAMAR para activar el comando de voz. Si desea obtener mejores resultados, grabe la etiqueta de marcación por voz mediante el auricular.
Funciones de los botones: resumen ESP 10 Modo de asociación (manual) Apagado Comprobación del estado de la batería Inactivo último número Reproducir Encendido Pausar Música encendida Detener Música encendida Siguiente canción Canción anterior Adelantar Rebobinar Música encendida Música encendida Música encendida Música encendida Incremento de graves Música encendida Acción Función Mueva el interruptor hacia la posición de ‘ENCENDIDO’.
Especificaciones Descripción 2.1+EDR (perfiles manos libres/auricular/A2DP) Batería de polímero litio de 3,7 V/195 mAh Hasta 10 horas Hasta 10 horas Hasta 360 horas Menos de 2,5 horas Entre -10°C y 60°C 135,6 mm (ancho) x 167,3 mm (largo) x 16,9 mm (alto) / 32 g Precauciones Evite las caídas del dispositivo. AVISO DE LA FCC PARA LOS USUARIOS: Este dispositivo cumple con la sección 15 de la normativa de la FCC.
ESP 2. Atmósferas potencialmente explosivas Cuando se encuentre en una atmósfera potencialmente explosiva, apague el dispositivo electrónico. Aunque es muy poco frecuente, el dispositivo electrónico podría generar chispas. En esos lugares, las chispas podrían ocasionar una explosión o un incendio y, como consecuencia, lesiones o incluso la muerte. Las zonas con riesgo de explosión suelen estar claramente señaladas, aunque no es así en todos los casos. 3. Llamadas de emergencia Importante.
Información Adicional ESP • En algunos estados y países, no se permite la exclusión o la limitación de daños fortuitos y sus consecuencias, ni la limitación del plazo de las garantías implícitas. Por lo tanto, las exclusiones o limitaciones de los párrafos anteriores podrían no aplicarse en su caso.
MEMO MEMO