OWNER'S MANUAL LG CineBeam DLP Projector Please read the safety information carefully before using this product. HF65LA www.lg.com P/NO : SAC37813512 (1901-REV00) Copyright © 2019 LG Electronics Inc. All Rights Reserved.
LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. ENGLISH The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.
SAFETY PRECAUTIONS WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH • Do not place flammable materials such as aerosols near the projector. -- This may result in fire. • Do not allow children to cling to or climb up to the projector. -- This may cause the projector to fall, causing injury or death. • Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. -- This may result in fire due to the increase in internal temperature.
CAUTION WARNING • DISCONNECTING THE DEVICE FROM THE MAIN POWER -- The Power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible. • The grounding wire should be connected. (Except for devices which are not grounded.) -- Ensure that you connect the grounding cable to avoid electric shock. If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker.
ENGLISH • Do not plug too many devices into one multi-power outlet. -- This may result in fire due to the power outlet overheating. • Keep the AC adapter, power plug, and the used power outlet clean from dust or foreign materials building up. -- This may result in fire. • If there is any smoke or a burning smell from the projector or AC adapter, stop using the product immediately. Disconnect the power cord from the power outlet, and then contact the customer service center. -- This may result in fire.
• Never disassemble the power supply devices (AC adapter/power cord, etc.). -- This may damage the power cord and result in a fire or electric shock. • Connect the AC adapter and the power cord firmly. -- Not doing so may result in a product failure or fire. • Do not place heavy objects or put pressure on the power cord and AC adapter and avoid damage. -- This may result in a fire or may damage the product. • Always use the AC adapter provided or any AC adapters approved and certified by LG Electronics.
When in Use WARNING ENGLISH • Do not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, medicine, or ornaments, candles, etc. -- This may result in fire or electric shock, or cause injury due to falling. • In the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. -- This may result in electric shock.
CAUTION • Do not place heavy objects on the projector. -- It may fall down and cause personal injury. • Be careful not to allow any impact to the lens during transport. • Do not touch the lens of the projector. -- The lens may be damaged. • Do not use any sharp tools on the projector such as a knife or hammer, because this may damage the casing. • In the event that no image appears on the screen or no sound is heard, stop using the projector.
ENGLISH • Do not block the light beam emitted from the projector using a book or other object. -- Lengthy exposure to the projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat. Disable the AV function to stop projection temporarily or turn off the power. • Do not start the projector with the volume turned up high. -- High volume may damage hearing. • Do not use high voltage electrical equipment near the projector, (e.g., a bug zapper).
CAUTION ENGLISH • Contact your seller or our service center once a year to clean the internal parts of the projector. -- If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector. • When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth.
Others WARNING ENGLISH • When you go out, place the projector out of reach of animals, and remove the power plug from the wall outlet. -- Using a damaged power cord may result in short circuit or fire. • Do not use the projector near highprecision electronic devices or those that transmit weak radio signal. -- This may affect the operation of the product, causing an accident. • Only a qualified technician can disassemble or modify the projector.
CAUTION Risk Group 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. This label is attached to the bottom of the product and language may differ. ENGLISH • Do not use or store the projector outdoors for long periods of time. • Do not mix new batteries with old ones. -- Burst or leaking batteries may result in damage or injury. • Be sure to unplug if the projector is not to be used for a long period.
ANTENNA WARNING ENGLISH • If you are using an outdoor antenna, please install it away from electrical wires to make sure it does not touch any nearby wires even when it falls down due to heavy wind. -- Failure to do so may cause electric shock or physical injury. CAUTION • To prevent any water flowing into the product, install a drip loop in the outdoor antenna wire where it comes indoors. -- Raindrops flowing into the product may cause fire or electric shock.
For USA NOTE TO CABLE/TV INSTALLER ENGLISH This reminder is provided to call the CATV system installer’s attention to Article 820 - 40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
CONTENTS LICENSES ENGLISH SAFETY PRECAUTIONS 2 3 USING THE PROJECTOR 32 Connecting the Antenna or Cable 32 -- Focus of the Screen Image 33 -- Watching With the Projector 33 PREPARATION 17 Accessories 17 Optional Extras 18 CONNECTING DEVICES Parts and Components 19 Using the Joystick Button -- Basic functions -- Adjusting the menu 21 21 22 Projector Status Indicators 22 HDMI Connection 35 -- Connecting to HD Receiver, DVD, or External Devices 35 -- Connecting a PC 36 -- Connecting a La
PREPARATION The pictures may differ slightly from the actual product. Accessories included with the projector are show below. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Magic Remote Control Two AA Batteries Owner's Manual Power cord AC-DC Adaptor • When connecting an HDMI or USB cable, or connecting a USB flash drive to the HDMI or USB port, use a product that has a width of 18 mm (0.7 inches) or less and a height of 10 mm (0.
Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice.
Parts and Components Joystick Button Outlet Vent1) Mirror2) Speaker Inlet Vent Focus Ring Speaker Lens2) Inlet Vent IR Receiver Bottom of the Projector Adjustable leg3) 1) Due to the high temperature of vent area, do not get close to the vent area. 2) Do not touch the lens and mirror when using the projector. The lens may be damaged. (Keep lens away from sharp objects.) 3) Turn the adjustable leg left or right to adjust the angle.
ENGLISH Side 1 3 2 Back 6 7 8 No.
Using the Joystick Button You can operate the projector by pressing the button or moving the joystick left, right, up, or down. Power On When the projector is turned off, place your finger on the joystick button, press it once, and release it. Power Off Press and hold the joystick button for more than 3 seconds while the projector is on. Volume Control Place your finger over the joystick button and move it left or right, you can adjust the volume level.
Adjusting the menu ENGLISH When the projector is turned on, press the joystick button one time. You can adjust the menu items ( , , , ) moving the joystick button left, right, up, or down. Move to the desired menu item, and then press the joystick button once to select it. Turns the power off. Changes the input source. Clears on-screen displays and returns to projector viewing. Displays the Settings menu.
Installation Installation Precautions -- Do not place the projector on a carpet or rug. If the projector’s inlet vent is on the bottom, be careful not to block the vent and always use the projector on a solid, level surface. ENGLISH • Place the projector in a wellventilated environment. -- To prevent internal overheating, install the projector in a wellventilated place. Do not place anything near the projector. That may block its air vents.
ENGLISH • The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/ or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. • The remote control may not work in an environment where a lamp equipped with electronic ballasts or a three-wavelength fluorescent lamp is installed.
Projection Distance per Screen Size 1 2 4 Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen. If the projector is not at a right angle, the projected image will look distorted. To correct the distortion, use the Edge Adjustment function. Connect the power cord of the projector and the connected device to the wall outlet.
Screen Size ENGLISH Horizontal Size (X) x Vertical Size (Y) A B C D mm 1524 1778 2032 2286 2540 inches 60 70 80 90 100 mm 1328 x 747 1550 x 872 1771 x 996 1992 x 1121 2214 x 1245 inches 52.2 x 29.4 61.0 x 34.3 69.7 x 39.2 78.4 x 44.1 87.1 x 49.0 mm 414 482 550 618 686 inches 16.2 18.9 21.6 24.3 27.0 mm 105 173 241 309 377 inches 4.1 6.8 9.4 12.1 14.8 mm 149 181 213 245 276 inches 5.8 7.1 8.3 9.6 10.8 mm 241 273 304 336 368 inches 9.
Kensington Security System ENGLISH • This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below. • For more information on installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. • The Kensington Security System is an optional accessory.
MAGIC REMOTE CONTROL ENGLISH If the battery low message appears while using the Projector, replace the batteries. As shown in the figure, press the top of the battery cover and slide it down the cover. Insert two new and identical batteries (1.5 V, AA type) with + and - poles pointing in the correct direction in the remote control. 1 NOTE • Do not mix new batteries with old ones. (POWER) Turns the Projector on or off.
Accesses the Home menu. Displays the list used previously. (Q. Settings) Displays the [All Settings] menu. (Up/Down/Left/Right) Press the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. Wheel (OK) Press the center of the Wheel button to select a menu.
To Register the Magic Remote Control To use the Magic Remote control, register it with your projector first. 1 2 Put batteries into the Magic Remote and turn the Projector on. ENGLISH Point the Magic Remote at your projector and press the Wheel (OK) on the remote control. • If the projector fails to register the Magic Remote, try again after turning the projector off and back on.
Using the Magic Remote Control CAUTION • Use the remote control within the specified range (within 10 m (32.8 feet)). You may experience communication failures when using the device outside the coverage area or if there are obstacles within the coverage area. • You may experience communication failures depending on the accessories. Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic Remote. This may cause communication failures.
USING THE PROJECTOR Connecting the Antenna or Cable ENGLISH To watch TV using an indoor/outdoor antenna, connect a wall terminal and the antenna port of the projector using an RF cable (75 Ω). You can watch terrestrial or cable (analog, digital) TV. (The RF cable is sold separately.) NOTE • Make sure not to bend the copper wire of the RF cable (75 Ω). Turn the input jack to the right to fasten it. • Ensure you use a standard coaxial cable (75 Ω, sold separately) when connecting to the projector input.
Focus of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. • To adjust the focus of the image, rotate the focus ring. • Make sure the product does not move when adjusting the focus. Watching With the Projector 1 2 3 When in standby mode, press the on. Select the (INPUT) (POWER) button to turn the projector [All Inputs] and select the input signal you want. Control the projector using the following buttons while watching projector.
CONNECTING DEVICES You can connect various external devices to the projector.
HDMI Connection Connecting to HD Receiver, DVD, or External Devices With an HDMI cable, you can enjoy high quality picture and sound. Using a HDMI cable, connect the port of the projector to the HDMI output port of the device to connect. Both video and audio are output at the same time. Optional Extras ENGLISH Connect an HD receiver, DVD, or external devices to the projector and select an appropriate input mode. You can connect with any HDMI input port.
Connecting a PC ENGLISH The projector supports Plug and Play. Your PC will automatically detect the projector and requires no driver installation. Using an HDMI cable, connect the port of the projector to the HDMI output port of your PC. Both video and audio are output at the same time.
Connecting a Laptop You can connect the projector to a laptop to use various functions. The table below shows examples of switching the output. For more information, refer to the External Output, Connecting to an External Monitor, or similar sections of the owner’s manual of your computer. Brand Switching Output Lenovo HP Dell Acer ASUS LG Optional Extras Samsung Apple Adjust the control panel to enable mirroring after start-up.
Connecting Headphones You can listen to the audio through a headphone.
Connecting a Digital Amp Optional Extras ENGLISH Using an optical cable, connect the digital audio input port of a digital amp to the port of the projector. The output of an amp with a digital converter must be set to the desired audio format. When using a HDMI cable to connect a home theater or when connecting an optical output to an external audio device, set [Sound Out] to [HDMI ARC] or [Optical] as shown below.
Connecting a smart device (smartphone, tablet, etc.) ENGLISH • (INPUT) [All Inputs] [HDMI1]/[HDMI2] • The picture may look different from the actual product. Connect a smart device to the projector using a cable1) and set the external input of the projector to HDMI. The smart device screen will then be displayed through the projector. You can connect with any HDMI input port. For model-specific instructions regarding use of the wired connection, please check with the smart device manufacturer.
MAINTENANCE Clean your Projector to keep it in optimal condition. Cleaning the Lens • If there is any dust or staining on the lens surface, you must clean the lens. • To remove dust or stains on the lens, use a compressed air duster, cotton swab, or soft cloth to gently wipe the lens. • Do not wipe the lens while the product is in use or immediately after it has been turned off.
SPECIFICATIONS MODEL HF65LA (HF65LA-NA) ENGLISH Resolution (Pixel) 1920 (Horizontal) × 1080 (Vertical) Aspect ratio 16:9 (Horizontal:Vertical) Projection distance 414 mm to 686 mm (16.2 inches to 27.0 inches) -- Screen size –1524 mm to 2540 mm (60 inches to 100 inches) Ratio of upward projection 125 % Power consumption 100 W AC-DC Adaptor Manufacturer : Honor Model: ADS-110CL-19-3 190110G 19 V 5.
MODEL HF65LA (HF65LA-NA) Temperature 0 °C to 40 °C (32 °F to 104 °F) Storage -20 °C to 60 °C (-4 °F to 140 °F) Relative Humidity Operation 0 % to 80 % Storage 0 % to 85 % • Use only power supplies listed in the user instructions. • Contents in this manual may be changed without prior notice due to upgrade of product functions.
HDMI (DTV) Supported Mode Resolution ENGLISH 640 x 480p 720 x 480p 1280 x 720p 1920 x 1080i 1920 x 1080p Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.46 59.94 31.50 60.00 31.47 59.94 31.50 60.00 44.96 59.94 45.00 60.00 33.72 59.94 33.75 60.00 26.97 23.97 27.00 24.00 33.71 29.97 33.75 30.00 67.43 59.94 67.50 60.
HDMI (PC) Supported mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.46 70.09 720 x 400 31.46 70.08 640 x 480 31.46 59.94 800 x 600 37.87 60.31 1024 x 768 48.36 60.00 1152 x 864 54.34 60.05 1280 x 1024 63.98 60.02 1360 x 768 47.71 60.01 1920 x 1080 67.5 60.00 • If an invalid signal is input into the projector, it will not be displayed properly on the screen or a message such as [No Signal] or [Invalid Format] will be displayed.
Open Source Software Notice Information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SYMBOLS Refers to alternating current (AC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage. ENGLISH Refers to direct current (DC).
ABOUT LG PROJECTOR Image shown may differ from your projector. Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual. [ ] : the buttons and the text to be displayed on the projector screen. P/NO : SAC37813514 (1901-REV00) Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2 CONTENTS ABOUT LG PROJECTOR 4 ENGLISH Home Tutorial 4 -- Using the Home feature of the LG Projector 4 Prepare Live TV 8 -- Watching TV broadcasting 8 Network Setting 9 -- Network Setting 9 HOW TO OPERATE PROJECTOR 11 Using the Screen Remote 11 Setting Universal Control 13 Launching Apps through [QUICK ACCESS] 14 -- Using apps quickly and easily with [QUICK ACCESS] 14 SIMPLINK (HDMI-CEC) 16 -- Using SIMPLINK 16 Using the LG TV Plus App 18 -- Connecting Your Smart Device to a Projector Using the LG T
3 Use App & Contents -- Installing Apps Watching VOD Content 40 40 41 PLAY OTHER DEVICE FILES 42 66 Zooming in the Projector Display 66 -- Moving the Position of an Enlarged Screen 67 Enjoying Internet 68 -- Using the [Web Browser] 68 Playing Sound from a Smart Device through the Projector’s Speakers 71 [Notifications] 72 -- Using [Notifications] 72 TOUR LIST OF SETTINGS 73 Quick Settings 73 -- To use Setting function quickly 73 [Picture] Settings 74 [Sound] Settings 81 [Channels] Settings 88 [Ne
4 ABOUT LG PROJECTOR Home Tutorial ENGLISH Using the Home feature of the LG Projector You can open the Home screen by pressing the button on your remote control. You can combine frequently used apps on a single screen and use whichever you want at any time. 1 2 3 4 5 Description Launch [SEARCH]. 1 You can switch to another input or change your settings. You can easily change the settings of your projector. Select for advanced setup. 2 Add content you like to use, easily and quickly.
5 Description By adding channels you like, you can check channel information and watch your desired channel easily and quickly. 4 This is a list of recently used apps. To access the list of recently used apps, select this item and then press and hold the Wheel (OK) or OK button. You can view all the apps you used recently in the list. 5 You can run, move, and delete all the apps installed on your projector.
6 Managing Apps You can view a list of all apps installed on your projector, change their positions, or delete them. • Some apps cannot be edited. ENGLISH 1 2 3 Select the app you want to edit, and press and hold the Wheel (OK) or OK button on the Remote Control. This will activate the app edit mode. To move the app to your desired position, go to the position and press the Wheel (OK) or OK button. To delete an app, select the above the app.
7 Stopping the current function • The On Screen Display (OSD) of the projector may differ depending on the model. ENGLISH 1 2 3 Press the button on the remote control. Select the application name at the top left corner of the screen by the Remote Control to display the Close icon. Select the Close icon displayed next to the application name to quit the function in use.
8 Prepare Live TV Watching TV broadcasting ENGLISH 1 2 Connect the broadcast antenna/cable to the projector. You may also connect a piece of equipment that can receive broadcasting such as a set-top box instead of the antenna/cable. Press the button on the remote control. To see the details, select [Set-Top Box] from the device list that is displayed when operating the [Device Connector]. Start the (Q. Settings) [Channels] [Channel Tuning] Tuning]. Finds and adds only channels being broadcast.
9 Network Setting Network Setting Setting a Wired Network 1 2 Connect the LAN port of the projector and the router using a LAN cable. The router should be connected to the Internet beforehand. Press the (Q. Settings) button on the remote control and select [Network] [Wired Connection (Ethernet)]. This will start the wired network connection. • If the router supports DHCP, the projector is automatically connected to the network when you connect the projector to the network with a LAN cable.
10 Network Setting Warnings ENGLISH • Use standard LAN cable (connect to Cat7 or higher with RJ45 connector, 10 Base-T, or 100 Base TX LAN port). • Resetting the modem may fix some network connection problems. Turn the power OFF, disconnect and reconnect it, and then turn the power on to solve the problem. • LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
11 HOW TO OPERATE PROJECTOR Using the Screen Remote 1 2 Press the button on the Magic Remote. Using the Magic Remote, select your desired button on the Screen Remote displayed on your projector screen. 7 1 2 3 4 5 6 ENGLISH You can control external devices connected to your projector by using the Screen Remote displayed on your projector screen. • This feature is available on certain models only.
12 Description 2 Various kinds of information related to the program you are watching will appear at the bottom of the screen. 3 You can capture your projector screen. • This feature is available on certain models only. • You can view/delete screen-captured images in the [Photo & Video] app. 4 The buttons suitable for the selected device appear. 5 You will see more remote control buttons. 6 You can start the [Device Connector] app. You can set the universal remote control.
13 Setting Universal Control You can control devices such as Set-Top Box, Blu-ray Player, or Home Theater using by Magic Remote. • This feature is available on certain models only. 3 4 5 • • • • • • • • • • • Check that the device you want to set is connected to your projector. Press the (Press the button on the remote control and select button on the remote control.) at the top right. Select [All Inputs] and go to [INPUTS]. Select the input mode that the device is connected to in [INPUTS].
14 Launching Apps through [QUICK ACCESS] Using apps quickly and easily with [QUICK ACCESS] ENGLISH • Press and hold a number button on the remote control to open an app or to activate an external input registered to the button. Setting the [QUICK ACCESS] 1 2 3 Launch the app or select the channel or input you wish to assign. Press and hold the number button (1~9) you want to register. When the registration pop-up window appears, select [Yes].
15 Checking and editing [QUICK ACCESS] Press and hold the number 0 button on the remote control. The [QUICK ACCESS] edit screen appears. 1 ENGLISH 4 2 3 Description 1 Selecting a number that has already been registered allows deregistering it. 2 When you select a number that has not been registered, items that can be registered will be shown. 3 An item that has been registered to a different number is indicated with a check mark. 4 You can view a brief instruction for this function.
16 SIMPLINK (HDMI-CEC) Using SIMPLINK ENGLISH You can conveniently control and use various multimedia devices connected through HDMI with the projector’s remote control. 1 2 3 4 5 Connect the SIMPLINK HDMI Output port to the projector’s HDMI IN port with an HDMI cable. Press the [General] (Q. Settings) button on the remote control and select [SIMPLINK (HDMI-CEC)]. Set [SIMPLINK (HDMI-CEC)] to [On]. Configure the [Auto Power Sync] settings to [On] or [Off].
17 Supported SIMPLINK Functions ENGLISH • Instant Play When you start a multimedia device, you can immediately watch content from the device on the projector without having to control anything. • Controlling devices with the projector remote control Enables the user to control multimedia devices with the projector remote control to watch content. -- The pointer function of the Magic Remote can be limited.
18 Using the LG TV Plus App You can control the functions of your projector by using the app installed on your smart device. ENGLISH Connecting Your Smart Device to a Projector Using the LG TV Plus App 1 2 3 4 5 6 7 8 Download LG TV Plus app from the app store of your smart device. Press the [Network]. (Q. Settings) button on the remote control and select Set [LG Connect Apps] to [On]. Connect the projector and your smart device on the same Wi-Fi network.
19 Controlling Your Projector with the LG TV Plus App You can tap the buttons on your smart device’s screen to control the projector. 1 2 3 ENGLISH Description 1 You can use the same functions as the Magic Remote’s pointer and arrow keys. 2 You can change the channel, adjust the volume, or make other adjustments without using the remote control while watching a broadcast.
20 Mobile Connection Using Mobile Connection ENGLISH Mobile Connection lets you share and enjoy the content stored on people’s smart devices through your projector. • It is recommended that your Android smart devices run Lollipop or later versions of Android. Connecting a Smart Device with Mobile Connection Set up a connection following the guide below: 1 2 3 4 5 Install the LG TV Plus app on the smart device. Connect both your projector and the smart device to the same network.
21 Using a Keyboard and Mouse Using a USB Wired/Wireless Mouse Using a USB Wired/Wireless Keyboard Connect your keyboard to the USB port. You can enter text with the connected keyboard device. • It is not possible to enter text on some screens. • It is recommended that you use a product that has been tested for compatibility with LG projectors.
22 Using a Gamepad ENGLISH Connect your gamepad to the USB port on the projector if the game requires a gamepad. • It is recommended that you use a gamepad that has been tested for compatibility with LG projectors.
23 ENJOY LIVE TV Live Menu You can use the relevant features with ease when watching TV broadcasts. 1 2 Run [Live TV] by pressing . Move the Magic Remote’s pointer to the right side of the projector screen. You can also press the Right button on your Remote Control to see the Live Menu. You can bring it up by pressing the button on the remote control even when you are not watching any broadcasts. 1 2 Description 1 [CHANNELS]: View a list of broadcast content that is currently being broadcast.
24 ENGLISH • The channels displayed in Channel List are a configuration of channels provided by the broadcast service provider. Therefore, if the broadcast service provider has changed its channel configuration without notice, the channels displayed in Channel List may differ from the actual TV channels. • Because channel information displayed in Channel List includes information provided by external Electronic Program Guide (EPG) providers, it may differ from the actual TV channels.
25 My Channels Using My Channels Adding a Channel 1 2 3 Press the button on your remote control. Select [My Channels] at the bottom left of the screen. Selecting [Add Channel] displays a list of channels. Select the channel you want to add from the channel list. -- You can continue to add other channels to [My Channels] in the same way. • To add set-top box channels, you need to set [Set Up Universal Control] in [Device Connector] and use a Magic Remote.
26 Guide Viewing Guide You can view programs and the schedule of each program. ENGLISH 1 2 Press the button on the remote control. You can launch the [Guide] application. 5 6 7 8 9 10 1 2 3 4 Description 1 [CHANNELS]: View a list of broadcast content that is currently being broadcast. 2 [RECOMMENDED]: Get channel and program recommendations based on your viewing history. 3 You can view information about the channel and broadcast. 4 Select the button or the title of the desired program.
27 Description You can change the size for the program list to adjust the number of channels displayed on the screen. 7 Sets the filter. 8 Launch [TV Scheduler]. 9 Launch [Channel Manager]. 10 You can turn on / off Mini TV. • Program information is not displayed for channels with no provided broadcast information. Viewing Set-Top Box Guide After connecting the Set-Top Box, you can view programs and the schedule of the SetTop Box and use the Magic Remote.
28 Checking Program Info Viewing Program Information ENGLISH Information about the program you are currently watching, the current time, etc. are displayed. • The On Screen Display (OSD) of the projector may differ depending on the model. 1 While watching a live broadcast press the The Channel Banner appears. Wheel (OK) or OK button.
29 2 Select the Channel Banner. You can view detailed information about the program you are currently watching. ENGLISH Using the buttons on your remote control, you can view information about upcoming programs or other channels without changing the channel. • You can view broadcast information about other channels using the buttons. • You can view broadcast information about the channel you are currently watching using the buttons. Press the button on the remote control move the banner’s position.
30 Using MAGIC LINK ENGLISH It offers various videos and information related to the program you are currently watching. If you are watching a program via a set-top box, you should complete the universal remote control settings to use the [MAGIC LINK] function properly. 1 2 3 • • • • • • • Press the remote control’s Wheel (OK) or OK button or move the pointer to the top of the screen. The Channel Banner appears. Press the [MAGIC LINK] button in the Channel Banner.
31 Using Advanced Broadcast Settings If the broadcast you are watching contains [Closed Caption], [Audio Language], or [Multi Audio] information, you can use such features. Press the Wheel (OK) or OK button on your remote control. Select your desired feature in the top of the screen and set the feature to your desired value. 1 2 3 Description 1 You can set [Closed Caption]. 2 You can set [Audio Language]. • Only available with digital broadcasts. You can set [Multi Audio].
32 Using [TV Scheduler] This function is used to set the time and date for watching a specific program. 1 2 Press the button on your remote control. You can schedule a program to watch by selecting the [TV Scheduler] app. ENGLISH 1 2 3 4 Description 1 You can sort the list. 2 You can set the Delete Mode. 3 You can set the New Reminder. 4 Launch [Guide].
33 Schedule by program You can select a show to Schedule it for watching. Press the button on your remote control. You can schedule a program to watch by selecting the [Guide] app. Select the program you want. If you want to watch a live broadcast, click the [WATCH] button. In case of an upcoming program, click the [Reminder] button. • Applies to digital broadcasting. Manual Scheduling You can select the date, time, and channel to watch the channels. 1 2 3 Press the button on your remote control.
34 Watching Internet Channel You can watch real-time broadcasts through this service over the Internet. You can see information on new Internet Channels or manage the channels you like in [CHANNEL PLUS]. ENGLISH 1 2 3 4 5 • • • • • • • Press the [General] (Q. Settings) button on the remote control and select [CHANNEL PLUS]. Set [CHANNEL PLUS] to [On]. You can watch an Internet Channel in [Live TV]. While watching an Internet Channel, click the control. You can start the [CHANNEL PLUS].
35 HOW TO USE VARIETY OF CONTENTS LG Content Store 1 2 • • • • • Press the button on the remote control. Launch the [LG Content Store] application. This feature is available in certain countries only. Features may be limited in certain countries. Content may differ depending upon the model or country. Exercise caution when used by children. Children may have access to inappropriate online content through this product.
36 Creating Wish List Using [My Content] ENGLISH By adding your desired content to [My Content], you can use the content easily and quickly anytime. 1 2 3 4 5 • • • • • Press the button on your remote control. Select [My Content] in the top left of the screen. Select [Add Content]. Search for content. Select your desired content from the search results to add it to [My Content]. • You can also select from among recommended content shown under the search box and directly add it to [My Content].
37 Account Creating Creating LG Account In [Account Management], you can use your email address to create a new LG account. 2 3 4 5 6 Press the [General] (Q. Settings) button on the remote control and select [Account Management]. Select [CREATE ACCOUNT]. Read and accept the Terms of Service. Enter an ID and a password. Your ID must be your email address. Enter your birthday. Select [OK]. Go to your email to verify your email address. Please verify your email before the time expires.
38 Account Management Managing your LG Account You can manage the information of your LG account. ENGLISH 1 2 Press the Go to (Q. Settings) button on the remote control. [General] [Account Management] to log in. Personal Information You can view or edit your information of the account currently logged in. You can change the password or press [EDIT] to edit your personal information. This feature is available in certain countries only.
39 Search Content [Search] Searching for Content 1 2 Run [Search] by pressing the (SEARCH) button on your remote control. Search for a variety of content and information by typing in your desired search terms. 2 1 Description 1 Enter your desired search term. 2 Change the settings of the features provided by [Search]. • Some apps provide a feature that lets you search within your projector. If you run a search in such apps, the search will be carried out in [Search].
40 Use App & Contents Installing Apps You can use your LG account to install various apps on your projector. ENGLISH 1 2 3 4 5 6 Press the button on the remote control. Launch the [LG Content Store] application. Select your desired category from the categories shown at the top of the screen. The list of available apps in the selected category will be shown. Select an app to set up from the list. Read the details of the app and then press [Install].
41 Watching VOD Content You can immediately enjoy dramas, movies, and more with real-time streaming. 4 5 Press the button on the remote control. Launch the [LG Content Store] application. Select your desired category from the categories shown at the top of the screen, such as TV Shows and Movies. The list of available content in the selected category will be shown. Select an item from the list. You can play your desired content. An app may be required to play the content.
42 PLAY OTHER DEVICE FILES [Photo & Video] ENGLISH Viewing Photos and Videos You can view photos and videos using the [Photo & Video] app. 1 2 3 4 Press the button on your remote control. Launch the [Photo & Video] application. Select your desired storage device. Select and view your desired photo or video. 1 2 3 4 Description 1 Select your desired type of content and viewing method. 2 Select and delete your desired content. (You cannot delete files that are shared from other devices.
43 Photo Player Selecting a photo in the [Photo & Video] app runs the photo player. You can view your saved photos. ENGLISH 1 2 3 4 5 6 Description 1 Returns to the entire content list. 2 You can play background music by running the music player. 3 You can zoom the photos in/out. 4 Starts the slide show. 5 Rotates photos. 6 You can set the size of a photo or change the speed and effect of a slide show.
44 Supported Photo Files File type Format Resolution ENGLISH .jpeg .jpg .jpe JPEG Minimum: 64 x 64 Maximum Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) .png PNG Minimum: 64 x 64 Maximum: 5760 (W) x 5760 (H) .
45 Video Player Selecting a video in the [Photo & Video] app runs the video player. You can view your saved videos. ENGLISH 1 2 3 4 5 Description 1 Returns to the entire content list. 2 You can select other content by displaying the playlist while watching a video. 3 You can control basic video playback functions. 4 By zooming in the projector screen, you can view images in a larger size than the originals. 5 You can set additional options.
46 Setting Additional Options ENGLISH 1 2 3 4 5 Description 1 You can change subtitle settings. 2 You can set audio tracks. 3 You can set continue watching to resume playing from the last viewed scene. 4 You can set continuous playback. If continuous playback is set, the next video is automatically played after the playback of a video is over. 5 Returns to the basic operation screen.
47 Supported Video Files Maximum data transfer rate: Supported external subtitles: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) Supported embedded subtitles format: • Matroska (mkv): Sub Station Alpha (SSA), Advanced Sub Station Alpha (ASS), SRT • MP4 (mp4): Timed Text ENGLISH • Full HD video H.264 1920 x 1080@60P BP/MP/HP@L4.2 40 Mbps HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.
48 Supported video codecs Extension ENGLISH .asf .wmv Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (except for 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 .avi .mp4 .m4v .mov Video H.
49 Cautions for Video Playback ENGLISH • Some user-created subtitles may not work properly. • A video file and its subtitle file must be located in the same folder. For subtitles to be displayed properly, make sure that the video file and the subtitle file have the same name. • Subtitles on a Network Attached Storage (NAS) device may not be supported depending on the manufacturer and model. • Streams that include Global Motion Compensation (GMC) and Quarterpel Motion Estimation (Qpel) are not supported.
50 [Music] Playing Music You can listen to music by using the [Music] app. ENGLISH 1 2 3 4 Press the button on your remote control. Launch the [Music] application. Select your desired storage device. You can select your desired songs from all of your storage devices and add them to [MY PLAYLIST]. Select your desired music content and enjoy it. 1 2 3 4 5 Description 1 Select the desired type of content list. 2 Select and delete content. (Files shared from other devices cannot be deleted.
51 Using the Music Player The music player lets you choose music from other apps and use it as background music. ENGLISH 1 2 3 4 5 6 7 Description 1 You can play music from the selected storage device. 2 You can set repeat playback and random playback. 3 You can listen to music with the screen turned off.
52 Description ENGLISH 4 You can change the position of the music player. 5 You can minimize the music player. 6 This feature closes the music player. 7 Lyrics are available for music files that provide them. In some music files, you can choose a lyric section and move the playback position. • The lyrics feature is only supported on some devices. • The lyrics may not be displayed in sync depending on the lyrics data in the music file.
53 Audio Format File Format .wav .ogg .wma .flac Info 32 kbps ~ 320 kbps Sample freq. 16 kHz ~ 48 kHz Support MPEG-1, MPEG-2 Channels mono, stereo Bit rate - Sample freq. 8 kHz ~ 96 kHz Support PCM Channels mono, stereo Bit rate 64 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Vorbis Channels mono, stereo Bit rate 128 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support WMA Channels up to 6 ch Bit rate - Sample freq.
54 [File Viewer] Viewing Files You can see document files stored on a connected device. ENGLISH 1 2 3 4 Press the button on your remote control. Launch the [File Viewer] application. Select your desired storage device. Select and view your desired document file. 1 2 Description 1 Select your desired type of content and viewing method. Select and delete your desired content. (You cannot delete files that are shared from other devices.
55 Browsing File Viewer ENGLISH 1 2 3 4 5 6 Description 1 Returns to the entire content list. 2 Moves to the page you specify. 3 Sets the slide show. 4 Enlarges or reduces the document. 5 Starts the slide show. 6 Rotates the document. 7 Sets up the options of File Viewer.
56 Supported File Formats File Extension XLS, XLSX DOC, DOCX ENGLISH PPT, PPTX Supported Version Microsoft Office 97/2000/2002/2003/2007/2010/ 2013/2016 version TXT - PDF Adobe PDF 1.0/1.1/1.2/1.3/1.4 version HWP Hangul 2007 version • File Viewer realigns a document, so it may look different from what is displayed on a PC. • For documents that include images, the resolution may look lower during the realigning process. • If the document is large or has many pages, it may take longer to load.
57 Connecting USB Connect a USB storage device (USB HDD, USB Flash Drive) to the USB port on the projector to enjoy the content files stored on the USB storage device on your projector.
58 Tips for Using a USB storage device ENGLISH • A USB storage device that has a built-in automatic recognition program or uses its own driver might not be recognizable. • Some USB storage devices may not be supported or may not work properly. • If you use a USB extension cable, the USB storage device may not be recognized or may not work properly. • Please use only USB storage devices formatted with the FAT32 or NTFS file system provided by Windows OS.
59 Share Smartphone Content Content Share with Smartphone Connecting to a smartphone with your projector 1 2 3 4 Press the button on the remote control. Launch the [Device Connector] application. Select the [Smartphone]. Follow instructions in [Device Connector]. ENGLISH Content Share allows you to enjoy videos, music, and photos saved on your Smartphone that is connected to the same network.
60 Matters that require special attention during Content Share ENGLISH • Check your network settings if the Content Share option does not work properly. • May not work properly on a wireless network. It is recommended that you connect to a wired network. • May not work properly depending upon the network environment. • If multiple display devices are connected to one device, the content may not be played properly depending upon server performance.
61 Share Smartphone Screen To see the Mobile Device's screen on the projector • • • • • • Enable Miracast mode on the mobile device. Your projector will be displayed in the list of available devices. Select your projector and request connection. To start the connection; a message saying “Connecting...” will appear. After the connection is established, the projector will display the screen of the connected device.
62 Share Computer Content What Is Content Share? Content Share allows you to enjoy videos, music and photos saved on your PC. ENGLISH Play the content with sharing software on the PC If you have Windows 7 or later installed on your PC, you can play music, video, photos, etc. on your projector without needing to install a separate program. 1 2 Connect you projector and PC to the same network. PCs installed with Windows 7 or later also need to be connected to a network.
63 Use the SmartShare PC Software to play the content saved on the PC You can use SmartShare PC Software to connect the music/videos/photos saved on the PC to your home network and play them on your projector. 1 3 4 Download and install SmartShare PC Software from the LG website. Before installation, exit all programs running on the PC, such as a firewall or an antivirus software. Run SmartShare PC Software and configure the share settings.
64 Matters that require special attention during Content Share ENGLISH • Check your network settings if the Content Share option does not work properly. • May not work properly on a wireless network. It is recommended that you connect to a wired network. • If multiple display devices are connected to one device, the content may not be played properly depending on server performance. • May not work properly depending on the network environment.
65 Share Computer Screen To see the PC screen on the projector 1 2 3 4 5 • • • • • • • • Press the button on the remote control. Run the [Screen Share] app. Launch Miracast on the PC. Your projector will be displayed in the list of available devices. Select your projector and request connection. After the connection is established, the projector will display the screen of the connected device.
66 BENEFITS OF SMART PROJECTOR Zooming in the Projector Display ENGLISH By zooming in the projector screen, you can view images in a larger size than the originals. Press the button on your remote control while watching projector or in video playback. You can also press the [START LIVE ZOOM] button in the lower-right corner of the screen. 7 6 5 4 3 1 2 Description 1 The original screen before enlargement is displayed on the subscreen.
67 Description You can capture your current screen. You can view captured images in the [Photo & Video] app. 6 You can pause or resume your current screen. If you execute on resume while watching a broadcast, you will see the current broadcast screen. 7 Close the function and return to the original screen. • To exit the feature and return to the original screen, press or . • If you change the channel or run another app on an enlarged screen, the feature closes.
68 Enjoying Internet Using the [Web Browser] ENGLISH You can enter the website when you input the web address on the URL bar. If you input the search word, it will find the information about search word base on the search engine. 1 2 Press the button on the remote control. Launch the [Web Browser] application. 1 2 3 4 5 6 7 Description 1 You can add the current page to the Home screen, or add or delete the current page in [Bookmarks].
69 Description Zooms in or out of the screen. 5 [History]: You can open or delete the history list. [Bookmarks]: You can open or delete the bookmark list. [Settings]: Y ou can configure simple settings for the browser. [Encoding]: Y ou can change the language when the content is not properly displayed on the web page. 6 You can use the browser in full screen mode. To go back to the original screen, use the Remote Control to move the pointer to the top of the screen. [Exit Full Screen] will display.
70 Setting the Web Browser ENGLISH Press at the top of the screen and select the [Settings]. • [On Startup] You can set the startup page of the browser to [Open the New Tab page]/ [Continue where I left off]/[Home page:]. • [Search Engines] You can select the default search engine. • [Recommended Sites] You can change the settings so that [Recommended Sites] are displayed. The [Recommended Sites] and [Most Visited Sites] are displayed on a new tab.
71 Playing Sound from a Smart Device through the Projector’s Speakers Connect a smart device to the projector via Bluetooth to play sound from the smart device through the projector’s speakers. 4 Press the button on the remote control. Launches [Bluetooth Audio Playback]. Turn the smart device’s Bluetooth on, then select the projector from the list of devices. The projector will be connected to the smart device.
72 [Notifications] Using [Notifications] ENGLISH The [Notifications] transfers real-time notifications from various apps and LG services. It shows the status of apps that are currently running and allows you to view, delete, and run all notifications in one place. 1 2 Press the button on the remote control. Launch the [Notifications] application. 3 4 2 1 Description 1 You can delete notifications. 2 For notifications with long content, press [more] to open them in full view.
73 TOUR LIST OF SETTINGS The options may differ depending on the model. ENGLISH Quick Settings To use Setting function quickly Press the (Q. Settings) button on the remote control. Displays a set of light-weight controls quickly and simply such as [Picture Mode], [Aspect Ratio], [Sound Out] and so on. 1 2 3 4 5 6 7 8 Description 1 Closes the Quick settings. 2 You can set the [Picture Mode]. 3 You can set the [Aspect Ratio]. 4 You can choose the [Sound Out]. 5 You can set the [Sleep Timer].
74 [Picture] Settings [Picture Mode] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode that is best suited to your viewing environment, preferences or video type. The options may differ depending on the model. Depending upon the input signal, the available picture modes may be different. When watching online service content, the Picture Mode may be changed to match the content being shown.
75 [Picture Mode Settings] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] This feature allows you to adjust the selected picture mode in detail. • [Contrast] Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast. • [Brightness] Adjusts the overall screen brightness. The closer to 100, the brighter the screen. • [Sharpness] Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the image.
76 [Advanced Controls]/[Expert Controls] Adjust screen settings for individual picture modes. ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Advanced Controls] • [Dynamic Contrast] Corrects the difference between the bright and dark areas of the screen for optimal results depending on the brightness of the picture. • [Dynamic Color] Adjusts the color and saturation of the picture to make the image more colorful and lively.
77 ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Expert Controls] If you set the picture mode to Expert, you can set the following functions. • [Dynamic Contrast] Corrects the difference between the bright and dark areas of the screen for optimal results depending on the brightness of the picture. • [Super Resolution] Adjusts the resolution to make dim and blurred images clearer. • [Color Gamut] Selects the range of colors to display.
78 [Picture Options] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Picture Options] Adjust detailed settings to further optimize the picture. • [Noise Reduction] Removes small dots that stand out so as to make the image clean. • [MPEG Noise Reduction] Reduces the noise produced during the creation of digital video signals. • [Black Level] Compensates the screen brightness and contrast by adjusting the darkness of the screen. • [TruMotion] This feature is available on certain models only.
79 [Aspect Ratio] [Just Scan] (Q. Settings) [Picture] [Aspect Ratio Settings] [Just Scan] If you turn this feature [On], you can view the content in the aspect ratio that is in the broadcast signal or content source. If the edge of the screen is not clean, please turn it [Off]. If set to [Auto], the feature switches between [On] or [Off] status depending on the information contained in the video signal. • The items that can be selected may vary depending on the current input. ENGLISH (Q.
80 [Energy Saving] ENGLISH (Q. Settings) [Picture] [Energy Saving] Reduces power consumption by adjusting peak screen brightness. • [Off]/[Minimum]/[Medium]/[Maximum] Applies the pre-set [Energy Saving] mode. [Picture Test] (Q. Settings) [Picture] [Picture Test] First of all, start the Picture Test to see whether the video signal output is normal, and then select whether there is an error. If there are no problems in the test picture, check the connected external device or broadcast signal.
81 [Sound] Settings [Sound Mode] [Sound Mode] ENGLISH (Q. Settings) [Sound] [Sound Mode Settings] • [Standard] Optimizes the sound for all types of content. • [Cinema] Optimizes the sound for cinemas. • [Clear Voice III] Boosts voice clarity. • [Sports]/[Soccer] Optimizes the sound for sports. -- The name of the sport may differ depending on region. • [Music] Optimizes the sound for music. • [Game] Optimizes the sound for gameplay.
82 [Sound Mode Settings] ENGLISH (Q. Settings) [Sound] [Sound Mode Settings] You can only use [Virtual Surround Plus], [Equalizer], and [Reset] if [Sound Mode] is set to [Standard]. The options may differ depending on the model. • [Sound Mode] You can select the most suitable sound mode for each genre. • [Balance] You can adjust the volume of the left and right speakers. • [Virtual Surround Plus] Enjoy an immersive soundscape with the virtual multi-channel surround sound effect.
83 [Sound Out] The options may differ depending on the model. Playing audio through the projector's internal speakers Connecting and Using an Audio Device Supporting Optical (Q. Settings) [Sound] [Sound Out] [Optical] You can connect an audio device that supports [Optical] to the optical digital audio output port to enjoy your projector’s sound in richer quality and greater convenience. • Only available for models with an optical digital port.
84 Configuring digital sound output settings ENGLISH (Q. Settings) [Sound] [Sound Out] [Optical]/[HDMI ARC] [Digital Sound Out] You can configure the [Digital Sound Out] settings. • These settings are available only when an [Optical]/[HDMI ARC] is selected.
85 Connecting and Using an Audio Device Wirelessly ENGLISH (Q. Settings) [Sound] [Sound Out] [Bluetooth] You can connect wirelessly a Bluetooth audio device or a Bluetooth headset to enjoy your projector’s sound in richer quality and greater convenience. • If you have recently connected device that the sound bar supports LG Sound Sync, this feature automatically tries connecting to that device.
86 Using Wired Headphones ENGLISH (Q. Settings) [Sound] [Sound Out] [Wired Headphones] Select [Wired Headphones] to optimize audio output according to the device connected. • Some models may support the [Wired Headphones] function only. • If you connect the wired headphones while the projector is powered on, it automatically detects the wired headphones and redirects audio through them. • This feature is only available in certain countries.
87 [Auto Volume] [AV Sync Adjustment] (Q. Settings) [Sound] [AV Sync Adjustment] Adjusts the synchronization of the sound from the speaker that is working. The closer to (+), the slower the audio output. If you select the [Bypass], Outputs the broadcast signals or the sound from external devices without any audio delay. The audio may be output before the video because of the time the projector takes to process the video input. [Sound Test] (Q.
88 [Channels] Settings [Auto Tuning] ENGLISH (Q. Settings) [Channels] [Channel Tuning] [Auto Tuning] This function automatically searches and remembers channels that are available for viewing. • If the antenna or cable is not connected properly, channels are not added. • [Auto Tuning] finds and adds only channels being broadcast. • A password box will appear in [Safety] mode. [Manual Tuning] (Q. Settings) [Channels] [Channel Tuning] You can manually tune and save channels.
89 [Channel Manager] You can edit the selected channels from all the stored channels or add/delete them to/ from the favorite channels. (Q. Settings) [Channels] [Channel Manager] [Edit All Channels] You can lock or unlock the selected channels from all the stored channels, or you can set them to be skipped when switching channels. 1 2 Description 1 Lock the selected channels or unlock the locked channels.
90 Edit Favorite Channels List (Q. Settings) [Channels] [Channel Manager] [Edit Favorites] You can add/delete desired channels to/from the favorite channels, change their positions, etc. ENGLISH 3 4 1 2 Description 1 Select the desired channels from the all channels list and press the button to add them to the favorite channels list. 2 Delete the selected channels from the favorite channels list. 3 Select two channels from the favorite channels list, then press the button to swap their positions.
91 [Channel Advisor] (Q. Settings) [Channels] [Channel Advisor] If you set [Channel Advisor] to [On], you can get channel or program recommendations from [Live TV] based on your viewing history. (Q. Settings) [Channels] [Multi Audio] Sets the options related to the audio. • Available settings may differ by the program.
92 [Network] [Projector Name] ENGLISH (Q. Settings) [Network] [Projector Name] You can use the screen keyboard to set the name for the smart projector to be used on the network. • Up to 30 characters can be entered using the English alphabet. [Wired Connection (Ethernet)] (Q. Settings) [Network] [Wired Connection (Ethernet)] The projector will be connected automatically to the network if a cable connection is established. To change network connection settings, select [Edit] in Network Settings.
93 [Wi-Fi Direct] 1 2 3 4 5 6 Enable Wi-Fi Direct on the device to which you want to connect. A list of devices that can be connected to the projector is displayed. Select a device to connect. If the desired device accepts the request, Wi-Fi Direct will be connected. From your desired connected device, select the video, music and photo files that you want to open on your projector via the LG TV Plus app or the content sharing feature.
94 [General] [Language] ENGLISH (Q. Settings) [General] [Language] You can choose the menu language displayed on the screen and the audio language of the digital broadcast. • [Menu Language] You can select one of the menu languages to be displayed on the screen. • [Audio Language] You can choose the language you want when watching a digital broadcasting program, which includes multiple audio languages. For programs that do not support multiple languages, the default will be used.
95 [Time & Date] [Sleep Timer] (Q. Settings) [General] [Timers] Sets the projector to turn off at a specified time. If you want to disable [Sleep Timer], select [Off]. [Sleep Timer] [Timer Power On]/[Timer Power Off] (Q. Settings) [General] [Timers] [Timer Power On]/[Timer Power Off] You can set the power on/off time for the projector. Select [Off] if you are not going to set [Timer Power On]/[Timer Power Off]. • To use [Timer Power On]/[Timer Power Off], set the time correctly. [Auto Off] (Q.
96 [Account Management] (Q. Settings) [General] [Account Management] Manage your account information and settings. ENGLISH [Power Saving Mode] (Q. Settings) [General] [Power Saving Mode] Set power options to reduce energy consumption. • [Auto Power Off] Set the projector to turn off automatically when there has been no user input for a specified amount of time.
97 [Mobile Projector On] [SIMPLINK (HDMI-CEC)] (Q. Settings) [General] [SIMPLINK (HDMI-CEC)] You can conveniently control and use various multimedia devices connected through HDMI with the projector remote control. ENGLISH (Q. Settings) [General] [Mobile Projector On] If [Turn on via Wi-Fi] or [Turn on via Bluetooth] is set to [On], you can turn on your projector using an application that supports [Mobile Projector On] or see the screen of the application on your projector.
98 [Edge Adjustment] (4 Corner Keystone) ENGLISH (Q. Settings) [General] [Edge Adjustment] [Edge Adjustment] (4 Corner Keystone) adjusts the horizontal and vertical sides of the projected image if the projector is at an angle and not perpendicular to the screen. This feature ensures the shape of the projected image is not distorted. Use this feature only when the projector cannot be set up at the optimal angle. [Edge Adjustment] may result in a loss of image quality.
99 [Auto Power] [High Altitude] (Q. Settings) [General] [High Altitude] If the projector is used at an altitude higher than 1200 meters (3937.0 feet), turn this on. Otherwise, the projector may overheat or its protection function may be activated. If this happens, turn the projector off and then on again after waiting for several minutes. • This feature is available on certain models only. ENGLISH (Q.
100 [LG Wireless Keyboard] ENGLISH (Q. Settings) [General] [LG Wireless Keyboard] This feature enables you to connect a LG wireless keyboard to your device. Turn on the device, set it to pairing mode, and then click [CONNECT] on your projector screen. • Supported keyboard -- LG Rolly Keyboard • If there is a LG wireless keyboard previously connected, it will be automatically reconnected to your projector once your projector turns on. • To disconnect the existing connection, click [DISCONNECT].
101 [About This Projector] (Q. Settings) [General] [About This Projector] You can check the information about Customer Services, (Software Update, projector Information, and so on.) (Q. Settings) [General] [Self Diagnosis] Troubleshoots functional problems that can arise while using the product. [Personalized Recommendation (Network)] (Q. Settings) [General] [Personalized Recommendation (Network)] Recommend channels or content based on your viewing information through network.
102 [Safety] Settings • Set [Safety] to [On]. • The initial password is set as “0000”. • The configurable items differ depending upon model. ENGLISH [TV Lock] (Q. Settings) [Safety] [TV Program Locks] [TV Lock] Locks the TV shows you do not want your children to watch. In addition, locks the TV shows of your choice based on ratings by using the parental control function (V-Chip). • [Children Age]: [TV-Y] (Preschool children aged 2-6 years), [TV-Y7] (Advise school children aged over 6.
103 [Movie Lock] [Downloadable Rating] (Q. Settings) [Safety] [TV Program Locks] [Downloadable Rating] This function is only enabled when the TV receives the Region5 rated data. The name of the rating option may differ. • Supported only in the digital mode. • This feature is available in certain countries only. [TV Rating English] Select Canadian English Rating System. • This feature is available in certain countries only.
104 [TV Rating French] ENGLISH Select Canadian French Rating System. • This feature is available in certain countries only. • [None]: View all programs • [E]: Exempt • [G]: General • [8+]: Not suitable for general audience and children • [13+]: Suitable for 13 years and over • [16+]: Suitable for 16 years and over • [18+]: Adults only [Channel Locks] (Q. Settings) [Safety] [Channel Locks] Select the Channels to lock. [LOCK] You can lock the channels you do not want your children to watch.
105 [Input Locks] (Q. Settings) [Safety] [Input Locks] You can lock or unlock the Input Locks. Select the Inputs to lock. (Q. Settings) [Safety] [Reset Password] Set or change the password for the projector. Resetting a Lost Password If you lose the password you set, you can reset it as follows: 1 2 3 Press the (Q. Settings) button on the remote control and move the focus to [Safety] [Reset Password]. Press password input window will appear. on the remote control.
106 [Accessibility] [Audio Guidance] ENGLISH (Q. Settings) [Accessibility] [Audio Guidance] If [Audio Guidance] is set to [On], audio guides will be provided in various situations, such as when you change channels, adjust the volume or change settings and input signals. • [Speed] Adjust the speed of spoken guide. • [Volume] Adjust the volume of spoken guide. • [Pitch] Adjust the tone of spoken guide. • This feature is available on certain languages only.
107 [Closed Caption] [Projector Power Sound] (Q. Settings) [Accessibility] [Projector Power Sound] This feature lets you turn on/off the sound effects that you hear when your projector is switched on or off. • This feature is available in certain countries only. • Settings the [Audio Guidance] to [On] automatically switches the [Projector Power Sound] to [On] as well. [High Contrast] (Q.
108 TO UPDATE SOFTWARE Uses software update to check and obtain the latest version. (Q. Settings) ENGLISH Menu [CHECK FOR UPDATES] [Allow Automatic Updates] [General] [About This Projector] Description When checking for the latest update version, you can perform updates only if an update file of a later version is available. The projector automatically checks your software version but, if necessary, you can perform a manual check.
109 TROUBLESHOOTING If you experience any of the problems below while using the product, please check the following. There may be no problem with the product. [General] (Q. Settings) [About This Projector] on the projector. Abnormal Operation I cannot see some channels. • Adjust the position or direction of the antenna. • Save the desired channels in (Q. Settings) Tuning] or [Channel Manager]. [Channels] [Channel The screen does not appear for some time after power-on.
110 ENGLISH It says there is no signal on the screen. • Make sure that the coaxial cable or HDMI cable is correctly connected to your projector. • Go to to choose the connected input. • Check if your external device, such as set-top box or Blu-ray player, is turned on. It does not work when I connect a USB device. • Check that the USB and USB cable versions are 2.0 or higher. Screen Problems First of all, perform a (Q. Settings) [Picture] [Picture Test] to check for any abnormalities in the projector.
111 I cannot see digital broadcasts even though I am using a cable television. • Check your subscription information with your cable television service provider or ask for the signal to be checked. (Some products do not provide digital broadcasts.) I see vertical lines in all four directions on the screen, or colors are blurred when I try to connect to HDMI. • (Q. Settings) [Picture] [Aspect Ratio Settings] [Just Scan] Set [Just Scan] to [Off]. [Just Scan] shows you the original image as it is.
112 Sound Problems ENGLISH First of all, perform a (Q. Settings) [Sound] [Sound Test] to check for any abnormalities in the projector. If you are using a set-top box, turn it off, and then turn it back on. Make sure that the set-top box is correctly connected to your projector. The screen is fine, but it does not play any sound. • Try another channel. • (Q. Settings) [Sound] [Sound Out] Check whether the [Sound Out] is set to [Internal Projector Speaker].
113 The volume changes when I change the channel. • The volume of different broadcasting stations transmission output may vary. • (Q. Settings) [Sound] [Auto Volume] Set [Auto Volume] to [On]. The sound does not play when I connect to the HDMI/USB port. • Check that you are using a high-speed HDMI® cable. • Check that the USB and USB cable versions are 2.0 or higher. • Use a normal music file (*.mp3, *.wav, *.ogg, *.wma).
114 PC Connection Problems ENGLISH The screen remains blank after it is connected to a PC. • Check that the PC is properly connected to the projector. • Turn the projector off and back on using the remote control. • Restart the PC with the projector on. • Check that the current screen resolution supports the PC input. • To use dual monitors, check that the PC or notebook supports dual-monitor mode. • Reconnect the high speed HDMI cable.
115 [Photo & Video] Movie Playback Problems For more information about supported files, see “PLAY OTHER DEVICE FILES”. I get a message saying “This file is not supported” or the sound is playing normally but the video is not. • Check that the file plays without any problems on a PC’s video player. Also check for file damage. • Check that the file extension is supported. • Check that the resolution is supported. • Check that the video codec is supported. • Check that the frame rate is supported.
116 ENGLISH I cannot see the subtitles. • Check that the file plays without any problems on a PC’s video player. Also check for file damage. • Check that the video and subtitle files have the same name. • Also check that both the video file and the subtitle file are in the same folder. • Check that the subtitle file format is supported. • Check that the language is supported. (You can check the language of the subtitle file by opening the file in the Notepad.
117 Network Connection Problems When X appears next to projector • Check the projector or the AP (Router). • Check the connection status of the projector, AP (Router) and Cable Modem. • Power off and power on in the following order; 1. The Cable Modem, wait for the Cable Modem to reset. 2. The AP (Router), wait for the AP (Router) to reset. 3. The projector. • If you are using a wireless connection, change the SSID (Network name) and wireless channel of AP (Router).
118 When X appears next to DNS ENGLISH • Check the AP (Router) or consult your Internet service provider. • Unplug the power cord of the Cable Modem or the AP (Router), wait 10 seconds. Reapply power. • After the Cable Modem or AP (Router) has Initialized (Reset), try to reconnect. • Check that the MAC address of the projector/AP (Router) is registered with your Internet service provider.
119 LG Account Problems In some countries, access to the website (www.lgappstv.com) may be restricted. Is it possible for the family members to use different IDs on the same projector? • You can register multiple IDs per projector. I forgot my ID/Password. What should I do? • You can initialize the password through E-mail when you select FORGOT PASSWORD? on the sign in screen. • If you signed up on a PC, you can find your ID/Password on the website (www. lgappstv.com).
120 Contents Problems ENGLISH I cannot see any content in HOME. • This feature is available in certain countries only. You may not be able to see the content if the service country setting has been changed. Change to the service country you are going to use the service from in (Q. Settings) [General] [Location] [LG Services Country]. • You may not be able to view content that has been deleted. Please reinstall the appropriate app. • The type of supported content differs by country.
