User Manual

30
ENGLISH
ToRegistertheMagicRemoteControl
To use the Magic Remote control, register it with your projector rst.
1 Put batteries into the Magic Remote and turn the Projector on.
2 Point the Magic Remote at your projector and press the Wheel(OK) on
the remote control.
• If the projector fails to register the Magic Remote, try again after turning the
projector off and back on.
ToRe-registertheMagicRemoteControl
1 Press the and buttons at the same time, for ve seconds, to unpair
the Magic Remote with your projector.
2 Press the Wheel(OK) button towards the projector to re-register the
magic remote control.
• Pressing and holding the button will let you cancel and re-register Magic
Remote at once.