User Manual

32
ENGLISH
USINGTHEPROJECTOR
ConnectingtheAntennaorCable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
antenna port of the projector using an RF
cable (75Ω).
You can watch terrestrial or cable
(analog, digital) TV. (The RF cable is sold
separately.)
NOTE
• Make sure not to bend the copper wire of the
RF cable (75 Ω). Turn the input jack to the
right to fasten it.
• Ensure you use a standard coaxial cable (75
Ω, sold separately) when connecting to the
projector input.
• For better image quality in locations where
signal strength is low, purchase and install a
signal amplifier (booster).
Copper wire
• A signal splitter is required if you want to use two or more projectors through
one antenna.
• If you have any problems when installing the antenna, please consult a suitable
retailer or the store where you purchased the antenna.