ENGLISH Việt 中文 OWNER’S MANUAL Speaker Sound Bar Please read this manual carefully before operating your set and retain it for future reference. HLS36W (HLS36W, SHS36-D) HLS36W-N0_DSGPLLK_ENG_0458.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started RF Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use. 1 Getting Started Italy Notice A general authorization is requested for outdoor use in Italy. The use of these equipments is regulated by: 3 2. D.M. 28.5.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 7 7 7 7 8 9 9 Safety Information Unique Features – Portable In – Speaker ez (easy) Setup Accessories Introduction – Symbols Used in this Manual Playable file – MP3/ WMA music file requirement Remote control Front panel Rear panel 2 Connecting 10 12 12 13 13 13 Mounting the main unit on a wall Setting up – Pairing wireless subwoofer Optional Equipment Connection – AUDIO (PORT.
Table of Contents 4 Troubleshooting 19 Troubleshooting 5 Appendix 20 20 21 22 Maintenance – Handling the Unit Trademarks and Licenses Specifications 5 1 2 3 4 5 HLS36W-N0_DSGPLLK_ENG_0458.
Getting Started Unique Features 1 Portable In Accessories Please check and identify the supplied accessories. Getting Started Listen to music from your portable device. (MP3, Notebook, etc) Speaker ez (easy) Setup Listen to sounds from TV, DVD or Digital device with vivid 2.1 or 2.0 ch mode. Remote control Batteries WALL BRACKET INSTALL GUIDE Wall bracket Optical cable HLS36W-N0_DSGPLLK_ENG_0458.
Getting Started Playable file Symbols Used in this Manual MP3/ WMA music file requirement ,,Note Indicates special notes and operating features. ,,Tip Indicates tip and hints for making the task easier. >>Caution Indicates cautions for preventing possible damages from abuse. HLS36W-N0_DSGPLLK_ENG_0458.
Getting Started Remote control • • • • • • • • • • a • • • • • • • • • • 1 POWER: Switches the unit ON or OFF. AV SYNC: Synchronizes the audio and video. DOLBY DRC: Sets the Dobly DRC. 1 Getting Started MUTE: Mutes the sound. • • • • • • • • • • b • • • • • • • • • • FOLDER: Searches for a folder of MP3/ WMA files. When a USB containing MP3/ WMA files in several folders is being played, press FOLDER to select the folder you want to play. INPUT: Changes input sources.
Getting Started 9 Front panel B A 1 F E D C A Display D I STOP B USB Port E T PLAY / PAUSE C F FUNCTION Press it repeatedly to select other function. F – VOL + Adjusts speaker volume. Getting Started G G 1 STANDBY/ON Rear panel A B A PORT. (Portable) IN HLS36W-N0_DSGPLLK_ENG_0458.
Connecting Mounting the main unit on a wall You can mount the main unit on a wall. Prepare screws and brackets. 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill some holes. A guide sheet (WALL BRACKET INSTALL GUIDE) is supplied to drill. Use the sheet to check the point to drill. Step 2 Preperation 2 Unit Connecting Wall bracket WALL BRACKET INSTALL GUIDE 1.
Connecting 3. Remove the WALL BRACKET INSTALL GUIDE. 4. Fix it with screws (not supplied) as shown in the illustration below. 11 5. Hang the main unit onto the bracket as shown below. Step 5 Step 4 2 Connecting ,,Note Detach the unit from the bracket as shown below. ,,Note You can arrange power cord cable with the bracket as shown below. Power cord cable Power cord cable >>Caution yy Do not hang onto the installed unit and avoid any impact to the unit.
Connecting Setting up Pairing wireless subwoofer When your connection is not completed, you can see the red LED on the woofer and woofer is not made sound. To solve the problem, follow the below steps. LED Color Status 1. Press and hold I STOP button on the unit and MUTE button on the remote control simultaneously. - Displays the “REMATE”. Blue The wireless subwoofer is receiving the signal of the unit. 2. Press PAIRING on back of the woofer.
Connecting Optional Equipment Connection AUDIO (PORT. IN) In Connection 13 OPTICAL In connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN 1/ 2 connector. OPTICAL IN Connection 2 Connecting PORT.IN Connection MP3 player, etc... To the digital optical output jack of your component Speaker ez (easy) setup Listening to music from your portable player The unit can be used to play the music from many types of portable player or external devices. 1.
Connecting USB Playback Compatible USB Devices Insert USB memory device to the USB port on the front of the unit. yy MP3 Player : Flash type MP3 player. USB Connection evices that support USB2.0 or yy USB Flash Drive : D USB1.1. yy The USB function of this unit does not support some USB devices. USB device requirement 2 Connecting yy Devices which require additional program installation connected to a computer, are not supported. yy Do not extract the USB device while in operation.
Operating 15 Basic Operations Other Operations USB Operation DOLBY DRC (Dynamic Range Control) 1. Connect the USB device to the USB port. 2. Select the USB function by pressing INPUT. 3. Select a file you want to play by pressing C or V. To Stop Do this Press Z Playback Press d/M Pause Press d/M AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. 1. Press AV SYNC. 2.
Operating 16 Sleep Timer Setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. Displaying file and input source You can display various information on the USB and OPTICAL IN 1/ 2 mode by pressing INFO..
Operating Sound adjustment 17 ,,Note Setting the surround mode yy In some of surround modes, some speakers, there’s no sound or low sound. It depends on the mode of surround and the source of audio, it is not defective. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. yy You may need to reset the surround mode, after switching the input, sometimes even after the sound file changed.
Operating Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. 3 Operating Button Operation 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. VOL +/– Adjust the volume of the TV. PR/CH W/S Scan up or down through memorized channels. ,,Note Depending on the unit being connected, you may not be able to control your TV using some of the buttons. HLS36W-N0_DSGPLLK_ENG_0458.
Troubleshooting 19 Troubleshooting PROBLEM No Power CORRECTION Plug in the power cord. Check the condition by operating other electronic devices. Press FUNCTION and check the selected function. No sound The power cord of woofer is not connected. Plug the power cord into the wall outlet securely. Pairing between the unit and woofer gets disconnected. Connect the unit and woofer. (Refer to the page 12) The remote control is too far from the unit. The remote control does not work properly.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix 21 Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Appendix Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) 1 000 x 80 x 50 mm without foot Net Weight (Approx.) 2.3 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Bus Power Supply (USB) DC 5 V 0 500 mA Inputs DIGITAL IN (OPTICAL IN) 3 V (p-p), Optical jack x 2 PORT. IN 0.5Vrms (3.
HLS36W-N0_DSGPLLK_ENG_0458.
