ENGLISH OWNER’S MANUAL 3D Blu-ray Disc™ / DVD Wireless Soundbar Please read this manual carefully before operating your set and retain it for future reference. MODEL HLX55W (HLX55W, SHX55-D) P/NO : MFL67084707 HLX55W-FP_BKAZLL_ENG_4707.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly.
1 Safety Information RF Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. France Notice Safety Information Pour la France métropolitaine 2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur 2.400 - 2.454 GHz (canaux 1 à 7) autorisé en usage extérieur Pour la Guyane et la Réunion 2.400 - 2.4835 GHz (Canaux 1à 13) autorisé en usage intérieur 2.420 - 2.
Safety Information Important Notice for TV colour system • Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents.
Contents 3 Installation 16 18 1 Safety Information 2 Cautions and Warnings 2 Preparation 8 Introduction Mounting the main unit on a wall Setting up 18 Wireless connection 20 HDMI Connection 21 What is SIMPLINK? 21 Video Connection 22 Resolution Setting 23 Antenna connection 23 Connections with external device 23 24 PORT.
4 7 Operation Appendix 40 General Playback 43 Advanced Playback 47 On-Screen display 50 Enjoying BD-LIVE 51 Playing a movie file and VR disc 53 Viewing a photo 55 Listening to music 59 Playing the iPod 62 81 Controlling a TV with the Supplied Remote Control 82 Area Code List 83 Language code List 84 Network Software Update 84 Network update notification 84 Software Update 86 Video output resolution Radio Operations 89 Specifications 63 Playing content via your home
Preparation 2 Preparation 2 Introduction Preparation About the “ ” Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.
Preparation Video cable (1) Batteries (2) Playable Discs Blu-ray Disc -- Discs such as movies that can be purchased or rented. -- BD-R/RE discs that contain Movie, Music or Photo files. -- “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. DVD-VIDEO 12 cm disc Discs such as movies that can be purchased or rented.
Preparation NOTE • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. 2 • Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.
Preparation File compatibility NOTE Overall • HD movie files contained on the CD or USB 1.0/1.1 may not play properly. BD, DVD or USB 2.0 are recommended to play back HD movie files. Available file extensions differ depending on the DLNA servers. • Some “.wav” files are not supported on this player. • The file name is limited to 180 characters. • Depending on the size and number of the files, it may take several minutes to read the contents on the media.
2 Preparation Regional Code Certain System Requirements This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”. For high definition video playback: AVCHD (Advanced Video Codec High Definition) Preparation • This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format.
Preparation 13 Remote control 1 1 (POWER): Switches the player ON or OFF. Z OPEN/CLOSE: Opens and closes the disc tray. RADIO&INPUT: Changes input mode. 0-9 numerical buttons: Selects numbered options in a menu. 2 CLEAR: Removes a mark on the search menu or a number when setting the password. REPEAT: Repeats a desired section or sequence. • • • • • • •b • • • • • • 3 m/M SCAN: Searches backward or forward. ./> SKIP: Goes to the next or previous chapter / track / file.
Preparation Front panel AB C D E F 2 Preparation A USB Port B PORT. IN C iPod (24 pin) Connect to the furnished iPod cradle. D Display window E Touch buttons • 1/\ STANDBY/ON • i|| (PLAY / PAUSE) FUNC. ( ) Press and hold down this button about 3 seconds, then press repeatedly to select other function. • s (STOP) • - (VOLUME) + Adjusts speaker volume. CAUTION Precautions in using the touch buttons • Use the touch buttons with clean and dry hands.
Preparation 15 Rear panel A B 2 Preparation C D E A VIDEO OUT B Antenna Connector C OPTICAL IN HLX55W-FP_BKAZLL_ENG_4707.indd 15 D HDMI OUT (type A, Version 1.3) Connect to TV with HDMI inputs.
Installation 3 Installation Mounting the main unit on a wall You can mount the main unit on a wall. Prepare screws and brackets supplied. 3 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill some holes. A guide sheet (WALL BRACKET INSTALL GUIDE) is supplied to drill. Use the sheet to check the point to drill. Step 2 Preperation Installation Unit Wall bracket Screws Unit bracket WALL BRACKET INSTALL GUIDE 1.
Installation 3. Remove the WALL BRACKET INSTALL GUIDE. 4. Fix it with screws (not supplied) as shown in the illustration below. 17 6. Remove the stand from the unit. Step 6 Step 4 7. Hang the main unit onto the brackets, as shown below. 5. Attach the unit bracket to the unit with screws (supplied) as shown in the illustration below. Step 7 Installation 3 Step 5 NOTE Detach the unit from the bracket as shown below. CAUTION • Do not hang onto the installed unit and avoid any impact to the unit.
Installation Setting up Wireless connection LED indicator of wireless subwoofer 3 Setting an ID for the wireless subwoofer When the unit is manufactured, the ID is already set. If interference occurs or you use a new wireless subwoofer, an ID should be set again. 1. Press HOME ( ). Installation LED Color Operation 2. Use I/i to select the [Setup] and press ENTER ( ). The [Setup] menu appears. Blue The wireless subwoofer is receiving the signal of the unit. 3.
Installation • If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless subwoofer and main unit) away from there. • If you operate main unit then wireless subwoofer (rear speakers) sound within a few seconds in standby mode. • Set the distance between this unit and subwoofer Receiver within 10 m (32 ft.). • Optimum performance can be implemented only when the unit and the Wireless subwoofer within distance of 2 m (6 ft.) to 10 m (32 ft.
Installation HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable(Type A, Version 1.3). Connect the HDMI OUT jack on the player to the HDMI IN jack on a HDMI compatible TV or monitor. NOTE • Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. • When the HDMI connection with HDCP is not verified, TV screen is changed to black screen.
Installation What is SIMPLINK? Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. 21 Video Connection Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Video Connection Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.
Installation Resolution Setting The player provides several output resolutions for HDMI OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME ( ). 2. Use I/i to select the [Setup] and press ENTER ( ). The [Setup] menu appears. NOTE • If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press Z to open the disc tray. 2. Press x for more than 5 seconds.
Installation Antenna connection 23 Connections with external device Connect the supplied antenna for listening to the radio. Antenna Connection PORT. IN connection You can enjoy the sound from your portable audio player through the speakers of this system. You can also use the F (Function) button on the front panel to select the input mode. Player 3 Installation Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN of this unit.
Installation OPTICAL IN connection You can enjoy the sound of your component with the digital optical connection from the speakers of the system. Connect the optical output jack of your component into the OPTICAL IN jacks on the unit. And then select the [OPTICAL] option by pressing RADIO&INPUT and ENTER ( ). Or press OPTICAL to select directly. 3 You can also use the F (Function) button on the front panel to select the input mode.
Installation Connecting to your Home Network Wired Network Connection Router Broadband Service This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, Home Link, BD-LIVE interactivity and streaming services.
Installation Wired Network Setup Before setting the wired network, you need to connect the broadband internet to your home network. 4. Use U/u/I/i to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address.
Installation 7. If you select [Test] and press ENTER ( ) at step 5 above, the network connection status is displayed on the screen. You can also test it on [Connection Status] in the [Setup] menu. 27 Wireless Network Connection Wireless Communication PC Player Access Point or Wireless Router Wireless Network Connection Another connection option is to use an Access Point or a wireless router.
Installation Wireless Network Setup Before setting the wireless network, you need to: – connect the broadband internet to the wireless home network. – set the access point or wireless router. – note the SSID and security code of the network. 3 Installation For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow.
Installation [Push Button] – If your access point or wireless router that supports Push Button Configuration method, select this option and press the Push Button on your access point or wireless router within 120 counts. You do not need to know the access point name (SSID) and security code of your access point or wireless router. 5. Use U/u/I/i to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.
Installation • • • 3 Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. Any fees charged by an ISP including, without limitation, connection charges are your responsibility. A 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.
Installation USB device connection This player can play movie, music and photo files stored on a USB device. 31 2. Select [Movie], [Photo] or [Music] using I/i, and press ENTER ( ). 3. Select a file using U/u/I/i, and press PLAY or ENTER ( ) to play the file. You can check the capacity of the USB device on the screen. 1. Insert a USB device into the USB port until it fits into place. USB Connection 4. Select an other mode. And withdraw the USB device carefully.
Installation NOTE • This player supports USB flash memory/external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-LIVE and Audio CD recording, only FAT16 and FAT32 formats are supported. Use the USB flash memory/external HDD formatted in either FAT16 or FAT32 when using BD-LIVE and Audio CD recording. • The USB device can be used for the local storage for enjoying BD-LIVE discs with Internet.
Installation Settings 33 4. Use U/u to select a second setup option, and press ENTER ( ) to move to the third level. Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME ( ). 5. Use U/u to select a desired setting, and press i or ENTER ( ) to confirm your selection. Installation 3 [DISPLAY] Menu 2. Use I/i to select the [Setup] and press ENTER ( ). The [Setup] menu appears. TV Aspect Ratio Select a TV aspect ratio option according to your TV type.
Installation NOTE You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. 1080p Display Mode When the resolution is set to 1080p, select [24 Hz] for smooth presentation of film material (1080p/ 24 Hz) with a HDMI-equipped display compatible with 1080p/ 24 Hz input. NOTE Resolution Sets the output resolution of the HDMI video signal. Refer to page 22 and 86 for details about the resolution setting.
Installation [AUDIO] Menu Display Menu HD AV Sync Select a language for the [Setup] menu and on-screen display. Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync.
Installation DRC (Dynamic Range Control) This function allows you to listen to a movie at a lower volume without losing clarity of sound. [Off] Turns off this function. [On] Compress the dynamic range of the Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio output. 3 Installation [Auto] The dynamic range of the Dolby TrueHD audio output is specified by itself. And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode.
Installation Blocks playback of rated DVD based on their content. (Not all discs are rated.) [Rating 1-8] Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] If you select this, parental control is not active and the disc plays in full. BD Rating Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing. [255] All BD-ROM can be played. [0-254] Prohibits play of BD-ROM with corresponding ratings recorded on them.
Installation [OTHERS] Menu DivX VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. 3 Installation ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu.
Installation Information Displays the current software version. Update You can update the software by connecting the unit directly to the software update server (see page 84). Sound Effect Disclaimer Notice You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects.
Operation 4 Operation General Playback Playing Discs 4. Select [Movie], [Photo] or [Music] using I/i, and press ENTER ( ). 5. Select the Disc option using I/i, and press ENTER ( ). 1. Press OPEN/CLOSE (Z), and place a disc on the disc tray. 4 Operation When you connect up to two devices, it appears as above. 6. Select a file using U/u/I/i, and press B (PLAY) or ENTER ( ) to play the file. 2. Press OPEN/CLOSE( Z) to close the disc tray.
Operation Press x (STOP) while playback. To pause playback Press X (PAUSE) while playback. Press B (PLAY) to resume playback. To play frame-by-frame Press X (PAUSE) during movie playback. Press X (PAUSE) repeatedly to play Frame-byFrame. To scan forward or backward Press m or M to play fast forward or fast reverse during playback. You can change to various playback speeds by pressing m or M repeatedly.
Operation Playing Blu-ray 3D disc This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes. Preparation 2. Press Z (OPEN/CLOSE), and place a disc on the disc tray. 3. Press Z (OPEN/CLOSE) to close the disc tray. In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: a 1. Press HOME ( ), and set the [3D Mode] option on the [Setup] menu to [On] (page 34). The playback starts automatically.
Operation The “Blu-ray 3D” logo labeled BD-ROM disc can be played on this player with 3D mode output. If your TV is not the Blu-ray 3D-ready TV*, 2D mode output is available. The “Blu-ray 3D ONLY” logo labeled BD-ROM disc can be played on this player with 3D mode output. The Blu-ray 3D ONLY disc playback is not available, if your TV or player are not Blu-ray 3D-ready device. * 3D-ready TV refers to TVs that are compliant with “HDMI 1.4 3D mandatory format” standard.
Operation Repeating a specific portion BD DVD AVCHD ACD This player can repeat a portion you have selected. 1. While playback, press REPEAT to select [A-] at the beginning of the portion you wish to repeat. And then press ENTER ( ). 2. Press ENTER ( ) at the end of the portion. Your selected portion will be repeated continually. 3. To return to normal playback, press REPEAT repeatedly to select [OFF] or press CLEAR. To delete a Marker 1. Press SEARCH and the search menu appears on the screen. 2.
Operation Using the search menu BD DVD AVCHD MOVIE MOVIE-N 45 Changing content list view MOVIE MOVIE-N MUSIC MUSIC-N PHOTO Using the search menu, you easily find the point where you want to start playback. On the [Movie], [Music], [Photo] or [Home Link] menu, you can change the content list view. To search for a point Method 1 1. During playback, press SEARCH to display the search menu. Press red (R) colored button repeatedly. 2. Press I/i to skip the playback 15 seconds forward or backward.
Operation Method 2 1. On the content list, press INFO/DISPLAY ( ) to display the option menu. 2. Use U/u to select the [View Change] option. 3. Press ENTER ( ) to change the content list view. Last Scene Memory BD DVD This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
Operation On-Screen display You can display and adjust information and settings concerning the content. Displaying content information on-screen BD DVD AVCHD MOVIE MOVIE-N 1. While playback, press INFO/DISPLAY ( ) to show playback information. 47 i Movie Information – Select this option and press ENTER ( ) to display movie information 2. Select an option using U/u. 3. Use I/i to adjust the selected option value. 4. Press RETURN (O) to exit the On-Screen display.
Operation Playing from selected time BD DVD NOTE AVCHD MOVIE MOVIE-N 1. Press INFO/DISPLAY ( ) during playback. The time search box shows the elapsed playing time. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”. Press I/i to skip the playback 60 seconds forward or backward. 3. Press ENTER ( ) to start playback from selected time.
Operation Watching from a different angle BD DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. Changing the Picture Mode BD DVD AVCHD MOVIE MOVIE-N You can change the [Picture mode] option while playback. 1. During playback, press INFO/DISPLAY ( ) to display the on-screen display. 1. During playback, press INFO/DISPLAY ( ) to display the on-screen display. 2. Use U/u to select the [Picture Mode] option. 2.
Operation Enjoying BD-LIVE This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). Secondary video and audio can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions in the disc.
Operation Playing a movie file and VR disc 51 NOTE • The file requirements are described on page 11. • You can use various playback functions. Refer to pages 40-49. You can play DVD-RW discs that are recorded in Video Recording (VR) format and movie files contained in a disc or USB device. 1. Press HOME ( ). • Unfinalized DVD VR format discs may not be played in this player. • Some DVD-VR disc are made with CPRM data by DVD recorder. This unit cannot support these kinds of discs.
Operation Selecting a subtitle file Changing subtitle code page MOVIE MOVIE MOVIE-N If a movie file name and the subtitle file name are the same, subtitle file is played automatically when playing the movie file. If the subtitle is not displayed properly, You can change the subtitle code page to view the subtitle file properly. If the subtitle file name is different from the movie file name, you need to select the subtitle file on the [Movie] menu before playing the movie. 1.
Operation Viewing a photo You can view photo files using this player. 1. Press HOME ( 53 To play a slide show Press B (PLAY) to start slide show. To stop a slide show Press x (STOP) during slide show. ). To pause a slide show Press X (PAUSE) during slide show. Press B (PLAY) to re-start the slide show. To skip to the next/previous photo 3. Select the device using I/i, and press ENTER ( ). NOTE • The file requirements are described on page 11. • You can use various playback functions.
Operation Options while viewing a photo You can use various options while viewing a photo in full screen. 1. While viewing a photo in full screen, press INFO/DISPLAY ( ) to display the option menu. Listening to music during slide show You can display photo files while listening to music files. 1. Press HOME ( ). 2. Select an option using U/u. a b c d e f g h 4 2. Select [Photo] or [Home Link] using I/i, and press ENTER ( ). 3. Select the [Disc] or [USB] option using I/i, and press ENTER ( ).
Operation 7. Use U/u to select a device, and press ENTER ( ). Device that you can select are differ depending on the location of the photo file you are displaying in full screen. Photo location Available Device Disc Disc, USB USB Disc, USB Share Folder on your PC (CIFS) CIFS DLNA server DLNA server 8. Use U/u to select a file or a folder you wish to play. 55 Listening to music The player can play Audio CDs and music files 1. Press HOME ( ). 2. Select [Music] using I/i, and press ENTER ( ).
Operation Audio CD Recording You can record one desired track or all of the tracks from an Audio CD to a USB storage device. 1. Insert a USB storage device to the USB port on the front panel. 2. Press Z (OPEN/CLOSE), and place an Audio CD on the disc tray. Press Z (OPEN/CLOSE) to close the disc tray. The playback starts automatically. 3. Press INFO/DISPLAY ( ) to display the option menu. Or 4 Press z REC button on the remote control. You can record all music titles in the audio CD. Operation 4.
Operation 57 NOTE • The table below shows the average recording time from an audio track with 4 minutes of playback time to a music file with 192 kbps as an example. stop mode while playback 1.4 min. 2 min. • All times in the above table are approximate. • Actual recording time for USB storage device varies depending on the USB storage device’s ability. • Make sure that there is minimum of 50 MB free space is needed when recording into the USB storage device.
Operation Viewing information from Gracenote Media Database This player can access the Gracenote Media Database and load the music information so that Track name, Artist Name, Genre and other text information can be displayed on the list. Audio CD When you insert an Audio CD, the player starts playback automatically and loads the music title from the Gracenote® Media Database. If there is no music information from the database, music titles will not appear on the screen.
Operation Playing the iPod You can enjoy the sound with your iPod. For details about iPod, refer to the iPod’s User Guide. 59 When you connect the iPod on the HOME menu, the player plays a music automatically. Or a menu for the file type selection will appear. Preparation To view iPod’s Videos and Photos on the TV screen. - Be sure to use the video connection through the VIDEO OUT jack on the rear panel of this unit. Select the appropriate video input mode on the TV.
Operation NOTE If the iPod’s OSD language is selected to simple chinese, the power scroll function is not operated correctly. Enjoying the iPod IN mode You can operate your iPod by using the supplied remote control and controls on your iPod. 1. Connect the iPod firmly. If you turn this unit on, your iPod is automatically turned on and recharging starts. 2. Press RADIO&INPUT to select iPod IN mode. 4 Operation U/u/I/i Selects an option in the menu. B /ENTER Starts playback the music or video.
Operation NOTE 61 • Connect the end on the cable with the marked “V“ facing front to side on the unit. • An error message “CHECK IPOD” or “Connected iPod model is not supported.” appears when: - your iPod is not available for the function to be operated. • If this unit displays an error message, follow the message. An error message “CHECK IPOD” or “Please check your iPod.” appears when: - the communication between this unit and your iPod has failed. t Undock & re-dock your iPod in this unit.
Operation Radio Operations Deleting all the saved stations Press and hold CLEAR for two seconds. “ERASE ALL” will flash up. Press CLEAR again. Then all the saved stations are deleted. Be sure that the antenna are connected. (Refer to the page 23) Listening to the radio 1. Press PRESET - / + to Select a preset number you want to delete. 1. Press RADIO&INPUT until TUNER (FM) appears in the display window. The last received station is tuned in. 2.
Operation Playing content via your home network This player can browse and play content from your PC and DLNA certified media servers connected on your home network. About DLNA 63 Accessing a DLNA media server 1. Check the network connection and settings (page 25). 2. Press HOME ( ). 3. Select [Home Link] using I/i, and press ENTER ( ). 4. Select a DLNA media server from the list using U/u, and press ENTER ( ).
Operation NOTE • The file requirements are described on page 11. • You can use various playback functions. Refer to pages 40-49. • Because the compatibility and available playback functions on the [Home Link] menu are tested on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and playback functions on the [Home Link] menu may differ depending on media servers.
Operation Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16-bit color settings Sharing files and folders • Windows® Internet Explorer® 6.0 or higher On your computer, you must share the folder containing movie, music and/or photo content to play them using [Home Link] features. • DirectX® 9.0c revision 30 (August 2006) or higher • Network environment: 100 Mb Ethernet, WLAN (IEEE 802.
Operation Accessing a share folder from your PC NOTE 1. Start your PC that is connected on your local area network. • The file requirements are described on page 11. 2. On your PC, share folders which contain movie, photo or music files. • The thumbnail of the unplayable files can be displayed in the [Home Link] menu, but those cannot be played on this player. • You can use various playback functions. Refer to pages 40-49. 3. On the player, check the network connection and settings (page 25). 4.
Operation Entering a network user ID and the password Depending on your PC’s environment, you may need to enter a network user ID and the password for accessing a shared folder. 1. The keyboard menu appears automatically if the network user ID and the password are required. 2. Use U/u/I/i to select a character then press ENTER ( ) to confirm your selection on the keyboard menu. 67 3.
Operation Using NetCast™ Entertainment Access YouTube You can use various content services via Internet with NetCast Entertainment Access feature. Watch YouTube videos on your TV 1. Check the network connection and settings (page 25). 2. Press HOME ( ). 3. Select the [NetCast] using I/i, and press ENTER ( ). 4. Select an option using I/i, and press ENTER ( ). 4 YouTube – See page 68 Operation Picasa Web Albums – See page 72 AccuWeather – See page 75 5.
Operation There are various options on the YouTube menu. Use U/u/I/i to select an option and press ENTER ( ) to select the options as described below. NOTE • The YouTube menu can display 5 videos in the videos list. Press green (G) or yellow (Y) buttons to display previous/next 5 videos. Recent Videos – The most recently updated videos list will be displayed. • If you select the [Most Viewed] or [Top Rated] option in the YouTube menu, the period options appear at the bottom of the screen.
Operation Using the virtual keyboard Keypad Mode On the virtual keyboard, there are two input modes for entering a character. Press the yellow (Y) colored button to toggle display between keyboard mode and keypad mode. This mode allows you to enter letters by pressing the buttons on the remote control. Press the buttons with the required letter once, twice, three or four times until the letter is displayed.
Operation You can search for videos by entering search words of up to 128 characters. 3. When you finish entering the user name and the password, select [OK] and press ENTER ( ) to sign in. 1. Use I/i to select [Search] option from the menu and press ENTER ( ) to display the virtual keyboard. 4. If you want to sign out, select [Sign Out] from the YouTube menu and press ENTER ( ). Refer to “Using the virtual keyboard” on page 70 for using virtual keyboard.
Operation Picasa Web Albums Enjoy photo albums from friends and family on the Picasa Web Albums on-line service. View Picasa Web Albums on your TV 1. On the player, select the [Picasa Web Albums] option in the [NetCast] menu using I/i, and press ENTER ( ). Featured photos are appeared on the screen. 2. Use U/u/I/i to select a photo and press ENTER ( ) to view the photo in full screen. 4 Operation Button Operation B Starts a slide show. INFO/ DISPLAY Displays the photo option menu.
Operation About the Picasa Web Albums menu Adding friends There are various options on the Picasa Web Albums menu. Use U/u/I/i to select an menu option and press ENTER ( ) to select the options as described below. If you add your friends on the [NetCast Friends] menu, you can see the photos of your friend’s public photos directly. NetCast Friends – List of your friends will be displayed. 1. Select the [NetCast Friends] on the Picasa Web Albums menu using U/u/I/i, and press ENTER ( ). 2.
Operation Searching for photos You can enter a search word to find related photos. 1. Select [Search] on the Picasa Web Albums menu using U/u/I/i, and press ENTER ( ). 2. Enter a search word using the virtual keyboard. Refer to “Using the virtual keyboard” on page 70 for using virtual keyboard. 3. Select [OK] using U/u/I/i, and press ENTER ( ) to display the search result. NOTE The search result from the player may differ with the result searched from a web browser on PC. 3.
Operation Using AccuWeather 75 5. Select a city using U/u/I/i, and press ENTER ( ). 6. Use U/u/I/i to select [Home] and press ENTER ( ) to display weather information of the selected city. See on-line local and global weather forcasts from AccuWeather.com. Viewing weather information The city selection menu appears on the screen. Press red (R) colored button to toggle display between Fahrenheit or Celsius thermometer. 7.
Operation Adding more cities 1. Use I/i to select [Favorite City List] on the AccuWeather menu, and press ENTER ( ). 2. Press ENTER ( ) while [Add City to Favorite City List] is selected. 3. Select a region, country and city using U/u/I/i and ENTER ( ). 4 4. Repeats step 2-3 to add up to 5 cities. Operation Select the [X] symbol and press ENTER ( ) to delete the stored favorite city. 5. Use U/u to select a city from the [Favorite City List], and press ENTER ( ) to display the weather information.
Maintenance 77 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Troubleshooting 6 Troubleshooting General 6 Troubleshooting The Power does not turned on. • Plug the power cord into the wall outlet securely. The unit does not start playback. • Insert a playable disc. (Check the disc type, color system, and regional code.) • Place the disc with the playback side down. • Place the disc on the disc tray correctly inside the guide. • Clean the disc. • Cancel the rating function or change the rating level. The angle cannot be changed.
Troubleshooting 79 Picture There is no picture. Picture noise appears Blu-ray 3D disc playback does not output 3D views. • Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. • Connect the video connection securely. • Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. • Your TV may not support the resolution you have set on the player.
Troubleshooting Network BD-LIVE feature does not work. • The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. • Ensure that the unit is correctly connected to the local area network and can access the internet (see page 25). • Your broadband speed may not fast enough to use the BDLIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Appendix 1 81 7 Appendix 2 Controlling a TV with the Supplied Remote Control 3 You can control your TV using the buttons below. Setting up the remote to control your TV You can operate your LG/GoldStar TV with the supplied remote control. While holding down TV POWER button, press PR/CH U/u. Release the TV POWER button to complete setting. When you replace the batteries of the remote, you may have reset the remote control. 4 Button Operation 1 (TV Power) Turn the TV on or off.
Appendix Area Code List Choose an area code from this list.
Appendix 83 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1. The update menu will appear on the screen when you turn on the player. 2.
Appendix NOTE • Pressing ENTER ( ) while checking for the update will end the process. • If there is no update available, the Message, “No update is found.” appears. Press ENTER ( ) to return to the [Home Menu]. CAUTION Do not turn off the power during the software update. NOTE 4. If newer version exists, the message “A new update was found. Do you want to download it?” appears. If the software includes the driver update, disc tray may open during the process. 5. Select [OK] to download the update.
Appendix Video output resolution When the non-copy protected media is playing back Video Out Resolution HDMI OUT 576i 576p 576p 576p 720p 720p 1080i 1080i 1080p / 24 Hz 1080p / 24 Hz 1080p / 50 Hz 1080p / 50 Hz HDMI OUT connection Appendix • For the 576i resolution setting, real output resolution of HDMI OUT will change to 576p. • If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].
Appendix 87 Trademarks and Licences “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray Disc Association. “BD-LIVE” logo is a trademark of Blu-ray Disc Association. “BONUSVIEW” is trademark of Blu-ray Disc Association. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Manufactured under licence from Dolby Laboratories.
Appendix DivX is a registered trademark of DivX, Inc., and is used under licence. “x.v.Color” is a trademark of Sony Corporation. Gracenote®, Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries. Music recognition technology and related data are provided by Gracenote®. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
Appendix Specifications General • Power requirements: Refer to the main label. • Power consumption: Refer to the main label. • Dimensions (W x H x D): Approx. 1 040 x 166 x 92 mm without foot • Net Weight (Approx.): 5.3 kg • Operating temperature: 41 °F to 95 °F (5 °C to 35 °C) • Operating humidity: 5 % to 90 % 89 Tuner FM Tuning Range: 87.5 to 108.0 MHz or 87.50 to 108.
Appendix System Wireless subwoofer • Laser: Semiconductor laser Wavelength: 405 nm / 650 nm • Power requirements: Refer to main label on the Subwoofer. • Signal system: Standard NTSC/ PAL color TV system • Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) • Signal-to-noise ratio: More than 85 dB • Total harmonic distortion: 0.
Appendix PLEASE READ CAREFULLY. USE OF THE NETWORK SERVICES IS SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. Use of the Network Services requires an Internet connection which is sold separately and for which you are solely responsible. The Network Services may be limited or restricted depending upon the quality, capabilities and technical limitations of your Internet service.
Appendix Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/ LGPL2.1 License Agreements: GPL EXECUTABLES: Linux kernel 2.6, bash, busybox, cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils, net-tools, procps, samba-3.0.25b, sysutils, tcpdump, tftpd, tinylogin, unzip, utelnetd LGPL LIBRARIES: uClibc, DirectFB, blowfish, cairo, ffmpeg, iconv, libusb, mpg123 gSOAP Public License 1.
Appendix This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote ”). The software from Gracenote (the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to perform other functions.
MADE IN INDONESIA HLX55W-FP_BKAZLL_ENG_4707.
