Installation guide

3
TABLE OF CONTENTS
ENGLISH
83 How to enter service setting
83 Service setting
84 Service contact
85 Model information
86 RMC version lnformation
87 Open source license
88 INSTALLER SETTING
88 How to enter installer setting
89 Installer setting
91 3 Minutes Delay
92 Select Temperature Sensor
93 Dry Contact Mode
94 Central Control Address
95 Pump test run
96 Air cooling set temp.
97 Water cooling set temp
98 Air heating set temp.
99 Water heating set temp
100 DHW set temp
101 Screed drying
103 Heater on temperature
105 Water supply off temp. during cooling
107 Tank disinfection setting 1, 2
108 Tank setting 1
109 Tank setting 2
111 Heater priority
112 DHW time setting
113 TH on/off Variable, heating air
114 TH on/off Variable, heating water
115 TH on/off Variable, cooling air
116 TH on/off Variable, cooling water
117 Pump setting in heating
118 Pump setting. in cooling
119 Forced operation
120 CN_CC
121 Pump frequency setting (RPM)
122 Smart Grid(SG)
123 Seasonal auto temp
125 Modbus Address
126 CN_EXT
127 Add Zone
128 Use External Pump
129 3rd Party Boiler
130 Meter Interface
131 Data logging
132 Password initialization
133 Password Initialization
134 Power Supply Blockage (SG Ready)
135 Overview settings
137 COMMISSIONING
137 Check List before Starting Operation
138 Starting Operation
139 Starting Operation flow chart
139 Airborne Noise Emission
139 Limiting concentration
140 Troubleshooting