Operation Manual

15
HOW TO INSTALL THE HOME STATION
1. Position the home station against a wall on hard level flooring to
prevent sliding during docking.
Remove objects within 1.5 m to the right and left side and within
2 m to the front.
2. Plug the jack into the home station.
3. Plug the power cord into an outlet.
Wrap the remaining power cord around the fixed hook on the
back side of the home station or along the wall surface so that
the travel path of the Robot Cleaner will not be obstructed.
4. Fix the home station against the wall so that it does not move.
5. When the remote controller is not used, store it in the remote
controller holder on the home station.
1.5 
1.5 
2 
ﺮﺘﻣ 1.5
ﺮﺘﻣ 1.5
ﺮﺘﻣ 2
Fixing hook of power cord
• Always keep the home station plugged in when in use. If the home station is not
plugged in, the Robot Cleaner will not return to the station to charge automatically.
How to Install the Home Station
< Warning > Do not operate the Robot Cleaner if the Home Station has a damaged cord
or plug, if it is not working properly, or if it has been damaged or dropped. To
avoid electrical hazards, the cord must be replaced by LG Electronics, Inc. or a
qualified service person.
Tip