Operation Manual

AUXILIARY CLEANING MODES

• Precautions with Smart Operation

- This Learning mode enables memorizing locations with obstacles to help bypass them.

Robot Cleaner memorizes every aspect of the environment it was subjected to from

when it started cleaning from the Home Station to the moment it finishes its course.

- Robot Cleaner learns new conditions again when the location of Home Station has

been changed.

- If the learning mode is accepted, a voice message will say "Environment has been

studied by learning process."

Tip

Pressing the 'Turbo' button on the Remote

Controller or main unit will activate 'Turbo' mode,

with a voice message.

While in 'Turbo' mode, pressing the same button

will cancel 'Turbo' mode, with a voice message.

In 'Turbo' mode, Robot Cleaner runs more

intensely for a powerful clean. Turbo mode will

reduce the battery duration.

※

‘Turbo mode’ will automatically operate when the

Robot Cleaner cleans carpets.

Pressing 'Repeat' button on Remote Controller will activate 'Repeat'

mode, with a voice message.

While in 'Repeat' mode, pressing the same button will cancel 'Repeat'

mode, with a voice message.

In 'Repeat' mode, Robot Cleaner repeats the cleaning in progress.

The Robot Cleaner is capable of memorising the

cleaning environment through its Learning mode

for an intelligent cleaning operation.

※

'Learning Mode' is available only when the

machine starts cleaning from the Home Station.

Turbo Mode

Repeat Mode

Learning Mode