Owner's Manual

18 Installation
Installation
3
Connecting to an
Amplifier
Make one of the following connections,
depending on the capabilities of your existing
equipment.
• HDMIAudioconnection(page18)
• DigitalAudioconnection(page19)
• 2CHAnalogueAudioconnection(page19)
Since many factors aect the type of audio
output, see “Audio Output Specications” for
details (pages 100-101).
About Digital Multi-channel sound
A digital multi-channel connection provides
the best sound quality. For this, you need
a multi-channel Audio/Video Receiver that
supports one or more of the audio formats
supported by your unit. Check the receiver
manual and the logos on the front of the
receiver. (PCM Stereo, PCM Multi-Ch, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS
and/or DTS-HD)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplier using
a HDMI cable. You will need to activate the
player’s digital output. (See “[AUDIO] Menu” on
pages 36-38.)
HDMI Audio Connection
TV
Amplifier/Receiver
Connect the amplier’s HDMI output jack to
HDMI input jack on your TV using a HDMI cable
if your amplier has HDMI output jack.
HDMI Cable
HDMI
Cable
HR558CC-P.BSWELLK_MFL65225539_ENG.indd 18 11. 3. 16. �� 3:41