OWNER’S MANUAL Blu-ray Disc™ Player with built-in HDD & HD Tuner Please read this manual carefully before operating your set and retain it for future reference. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER. HR600/HR650 P/NO : MFL65225521 www.lg.
Getting Started Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Getting Started POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz. WARNING: A mains plug removed from the mains lead of this unit must be destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter or with the earth symbol or coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distribution board.
Table of Contents Table of Contents 1 Getting Started 3 8 8 8 8 9 10 11 11 11 11 12 13 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories – Playable Discs – File compatibility – Regional Code – AVCHD (Advanced Video Codec High Definition) – System Requirements – Compatibility Notes Remote control Main Unit 2 Connecting 14 14 Connections to Your TV – Antenna connection to your TV and this unit – HDMI Connection – Component Video Conn
Table of Contents 44 44 45 45 46 46 46 46 47 47 48 48 49 49 50 50 50 51 51 52 52 52 53 53 54 54 54 55 55 55 56 56 57 59 59 60 61 61 62 62 63 64 – Editing a timer recording – Instant Timer Recording General Playback – Playing Discs – Using the disc menu – Resume playback – Playing the recorded titles – Searching the recorded titles – Sorting the recorded titles – Playing content contained in the internal hard disk drive – Searching content in the hard disk drive by entering file name – Playing Blu-ray 3D
Getting Started Introduction 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual ,,Note Indicates special notes and operating features. >>Caution Indicates caution for preventing possible damages from abuse. A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.
Getting Started Playable Discs Blu-ray Disc yy Discs such as movies that can be purchased or rented. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm / 12 cm disc) yy Video mode and finalized only yy Supports the dual layer disc also yy Finalized AVCHD format yy DVD±R discs that contain Movie, Music or Photo files.
Getting Started File compatibility Overall 1 Getting Started Available File extensions: “.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, “.wma”, “.ts” yy There could be a variance on the available file extensions depending on DLNA server. yy The file name is limited to 180 characters. yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. ,,Note yy HD movie files contained on the CD or USB 1.0/1.
Getting Started Compatibility Notes This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labelled same as the rear of the unit or “ALL”. yy Because BD-ROM is a new format, the can be issues regarding certain disc, digital connection and other compatibility issues. If you experience compatibility problems, please contact an authorized Customer Service Center.
Getting Started Remote control Getting Started MUTE (@): Mutes the sound. MUSIC ID: When the player is connected to the network, it can provide information about the song played during movie playback.. OPEN/CLOSE (B): Opens and closes the disc tray. INFO/DISPLAY (m): Displays or exits On-Screen Display. 0-9 numerical buttons: Selects numbered options in a menu. W/S/A/D (left/right/up/ down): Navigates on-screen displays.
Getting Started Main Unit 1 Getting Started WIRELESS j a 1 (Power) g X (Recording) b Disc Tray h Y/U (Skip)/PROG.
Connecting Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. yy Antenna connection (page 14) yy HDMI connection (page 15) 2 yy Component Video connection (page 16) Connecting yy Composite connection (page 16) yy Scart connection (page 17) Antenna connection to your TV and this unit Connect one end of the RF cable to ANTENNA OUT(TO TV) jack on the unit and other end to ANTENNA IN jack on your TV.
Connecting 15 ,,Note HDMI Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI jack on the unit to the HDMI jack on a HDMI compatible TV or monitor. yy If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. yy When you use HDMI connection, you can change the resolution for the HDMI output.
Connecting Component Video Connection Composite connection Connect the COMPONENT VIDEO OUT jacks on the unit to the corresponding input jacks on the TV using Y PB PR cables. Connect the left and right AUDIO OUT jacks of the unit to the audio left and right IN jacks on the TV using the audio cables. Connect the VIDEO OUT jack on the Recorder to the video in jack on the TV using the video cable supplied.
Connecting 17 Scart connection Resolution Setting Connect one end of the scart cable into the TO TV SCART jack on the unit and other end to the corresponding in jack on your TV. You can get Audio and Video signals together with this connection. The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears.
Connecting Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. yy HDMI Audio connection (page 18) Connecting to an Amplifier via HDMI Output Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 3334.
Connecting 19 Connecting to an Amplifier via Digital Audio Output Connecting to an Amplifier via 2 Channel Audio Output Connect the player’s DIGITAL AUDIO OUT (COAXIAL) jack to the corresponding in jack (COAXIAL) on your amplifier. Use an optional digital (coaxial) audio cable. You will need to activate the unit’s digital output. (See “[AUDIO] Menu” on pages 33-34.
Connecting Connecting to your Home Network 2 Connecting This unit can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, Home Link, BD-Live interactivity and streaming services.
Connecting Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. Preparation 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2. The [Connection Setting] menu will appear on the screen.
Connecting Wireless Network Connection Another connection option is to use an Access Point or a wireless router. In the example configuration for wireless connection below, this unit would be able to access content from either of the PCs. 2 The network configuration and connection method may vary depending on the equipment in use and the network environment. Connecting This player is equipped with an IEEE 802.11n (2.4 GHz band only) wireless module, which also supports the 802.11b/g standards.
Connecting 23 2. The [Connection Setting] menu appears on the screen. Use W/S to select [Wireless] and press ENTER (b). ,,Note yy WEP security mode generally have 4 keys available on an access point or wireless router’s setting. If your access point or wireless router uses WEP security, enter the security code of the key “No.1” to connect on your home network. yy An Access Point is a device that allows you to connect to your home network wirelessly. 2 4.
Connecting Notes on Network Connection: yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting 25 USB device connection This unit can play movie, music and photo files contained on a USB device. Playback content in the USB device 1. Insert a USB device into the USB port until it fits into place. ,,Note yy This unit supports USB flash memory/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live, only FAT16 and FAT32 formats are supported. The USB device can be used for local storage for enjoying BD-Live discs from the Internet.
System Setting Auto Set UP You can reset the recorder to all its factory settings. Some options cannot be reset (Rating and Password). The [Auto Setup] menu appears on the screen after the factory settings. Step 3. Time Setting 1. Use A/D to select an option among [Manual] or [Auto], and press ENTER (b). Step 1. Language Setting 1. Use W/S/A/D to select a language for the on-screen display, and press ENTER (b). 3 System Setting Step 2. Channel Setting 1.
System Setting Home Menu Overview Settings To access numerous functions of the unit, press HOME on the remote. Adjust the Setup Settings Basic button operations You can change the settings of the player in the [Setup] menu. HOME: Accesses or removes the Home Menu. 1. Press HOME (n). 27 W/S/A/D: Used to navigate on-screen displays. ENTER (b): Acknowledges menu selection. RETURN (x): Exits the menu. 3 DTV You can watch digital broadcasts.
System Setting Settings for Digital TV To use DTV functions, this recorder needs some settings in advance. Scanning programmes automatically (Auto Tuning) All available digital TV or radio programmes are searched for and stored automatically based on the selected country. 1. Press HOME. Scanning programmes manually (Manual Tuning) Scans digital TV or radio programmes and adds the detected programmes to the programme list. 1. Display [Setup] menu. 2. Use W/S to select [DTV], and press ENTER (b). 3.
System Setting 29 Editing Programme List (Channel Edit) You can remove any digital TV or radio programs stored on this recorder using the [Channel Edit] menu. 1. Display [Setup] menu. 2. Use W/S to select [DTV], and press ENTER (b). 3. Use W/S/A/D to select [Channel Edit] and press ENTER (b). 4. Press W to select [DTV] and use A/D to select [DTV] or [Radio] programme list. If you do not want to skip the programme, select the programme and press red coloured (R) button again.
System Setting Adjusting DTV Rating Setting the antenna power Viewing of some digital TV programmes can be limited according to the age limit you set. If you are using indoor antenna with a signal amplifier rated at DC 5V, 100mA, the recorder can supply power through ANTENNA IN jack. 1. Display [Setup] menu. 2. Use W/S to select [LOCK] and press ENTER (b). 3. Use W/S to select [DTV Rating] and press ENTER (b). 4. Input the password using numerical buttons.
System Setting 31 [DTV] Menu [DISPLAY] Menu Auto Tuning TV Aspect Ratio This option scans a programme and sets the available programmes. Refer to page 28 for more information. Select a TV aspect ratio option according to your TV type. Manual Tuning Scans digital TV or radio programmes and adds the found programmes to the programme list. Refer to page 28 for more information Channel Edit This option allows you to edit the TV or Radio programmes. Refer to page 29 for more information.
System Setting Resolution HDMI Color Setting Sets the output resolution of the Component and HDMI video signal. Refer to page 17 and 88 for details about the resolution setting. Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [Auto] [YCbCr] If the HDMI OUT jack is connected to TVs providing display information (EDID), this automatically selects the resolution best suited to the connected TV.
System Setting 33 [LANGUAGE] Menu [AUDIO] Menu Display Menu Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. Select a language for the [Setup] menu and onscreen display. Disc Menu/Disc Audio/Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. ,,Note Since many factors affect the type of audio output, see “Audio Output Specifications” on pages 86-87 for details.
System Setting Sampling Freq. (Digital Audio Output) [192 kHz] Select this if your A/V Receiver or Amplifier is capable of handling 192 kHz signals. [96 kHz] Select this if your A/V Receiver or Amplifier is not capable of handling 192 kHz signals. When this choice is made, this unit automatically converts any 192 kHz signals to 96 kHz so your system can decode them. [48 kHz] 3 System Setting Select this if your A/V Receiver or Amplifier is not capable of handling 192 kHz and 96 kHz signal.
System Setting 35 [LOCK] Menu DVD Rating To access any features in the [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Blocks playback of rated DVD based on their content. (Not all discs are rated.) Password You can create, or change the password. [None] Enter a 4-digit password twice, and press ENTER (b) to create a new password.
System Setting [NETWORK] Menu [OTHERS] Menu The [NETWORK] settings are needed to use the software update feature, BD Live, Home Link and Netcast features. Time Setting Connection Setting If your home network environment is ready to be connected to the player, the player needs to be set to the wired or wireless network connection for network communication. (See “Connecting to your Home Network” on pages 20-24.
System Setting DivX® VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.
4 Operating 38 Operating Using the Digital TV functions You can watch and record the digital TV programmes or playback the recorded TV programmes you want to watch using this unit. Viewing the Digital TV Viewing the Digital TV broadcasting on the TV screen. ,,Note yy DTV antenna connection is required. (page 14) yy DTV settings such as [Auto Tuning] in the [Setup] menu may be required. (page 28) 4 1. Press 1 (POWER) to turn on the recorder. Operating 2.
Operating 39 Viewing the programme information Selecting DTV subtitle language You can view a description of the programme being broadcast. Some digital programmes may broadcast several subtitle languages. You can select a subtitle language when it is available. 1. While watching DTV, press SUBTITLE. 1. While watching DTV, press ENTER (b) to display the programme information. 2. Press ENTER (b) or (RETURN or EXIT) again to close the programme information.
Operating Programme Guide (Digital program only) The Program Guide contains schedule and program information for digital programs. They also provide local over-the-air programs information including conventional digital programs. Use the Program Guide to find programs easily and conveniently and to view schedule and descriptive program information for the programs. To Display the Program Guide Press the GUIDE button on your remote control.
Operating 41 4. To release the timer recording, select the program, Select the option again then press ENTER (b). The red timer icon disappears Using the timeshift function manually Using the MHEG (Viewing MHEG) You can pause a Live TV broadcast, then continue watching the programme at a later time. This is useful when you receive an unexpected call or visitor while watching TV. Many digital TV channels broadcast information via their text service.
Operating Using the timeshift function automatically If you set the Timeshift option to [Auto], live TV broadcast will automatically be recorded to the HDD without pressing the TIME SHIFT button. The timeshift will start automatically when the Digital TV tuner mode is started. Refer to “Setting the Timeshift” on page 30 to set the [Timeshift] option. 1. Press 1 (POWER) to turn on the unit. 2. Use W/S/A/D to select [DTV] and press ENTER (b). The timeshift function will automatically start.
Operating 43 Timer Recording (Manual) Timer Recording (EPG) You can set the timer for a total of 32 programmes, up to 22-28 days in advance. You can also set the timer based on the information provided by the EPG. 1. While watching TV, press TIMER REC. 1. While watching TV, press GUIDE. 2. Use W/S/A/D to select the date to record, and press ENTER (b). 2. Use A/D to select date field, and select the date of recording schedule using W/S. 3.
Operating Canceling a timer recording Instant Timer Recording You can cancel a timer recording before the timer recording actually starts. You can set the recording time instantly to stop the recording automatically. 1. While watching TV, press TIMER REC. 1. Use PR (W/S) to select a programme you want to record. 2. Press the red coloured (R) button. 3. Use A/DW/S to select a schedule you want to cancel. 4. Use W/S to select [Timer Record List], and press the green coloured (G) button. 2.
Operating 45 General Playback Playing Discs 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. Insert a disc 6. Select a file using W/S/A/D, and press d (PLAY) or ENTER (b) to play the file. ,,Note yy Playback functions described in this manual are not always available in every files and media. Some functions can be restricted depending on many factors. yy Depending on the BD-ROM titles, a USB device connection may be needed for proper playback.
Operating Using the disc menu BD DVD AVCHD Playing the recorded titles REC To display the disc menu 1. While watching TV, press REC LIST to display the options menu or press REC LIST in Home menu. The menu screen may be displayed first after loading a disc which contains a menu. If you want to display the disc menu during playback, press DISC MENU. Use W/S/A/D buttons to navigate through menu items. To display the Pop-up menu Some BD-ROM discs contain a Pop-up menu that appears during playback.
Operating [Clear] – Clear all entered characters. [Space] – Inserts a space at the cursor position. [<–] – Deletes the previous character at the cursor position. 47 Playing content contained in the internal hard disk drive 1. Press HOME (n). [ABC / abc / #+-=&] – Change the keyboard menu settings to capital letters, small letters or symbols. ,,Note To enter a letter with an accent mark: 1. Select a letter using W/S/A/D on the keyboard menu. 2. Press INFO/DISPLAY to display the extended character set.
Operating Searching content in the hard disk drive by entering file name Playing Blu-ray 3D disc If you are having difficulties finding content in the hard disk drive, you can search for the content by entering keyword with the virtual keyboard Preparation 1. On the [Movie], [Photo], [Music] or Home menu, press SEARCH to display the virtual keyboard. This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes.
Operating 49 4. Refer to the owner’s manual of your 3D-ready TV for the further instruction. You may need to adjust the display settings and focus on your TV’s setting for the improved 3D effect. >>Caution yy Watching a 3D content for a long period time may cause dizziness or tiredness. yy It is not recommended to watch a movie in 3D mode for infirm, child and pregnant woman.
Operating Repeating a specific portion BD DVD AVCHD ACD This player can repeat a portion you have selected. 1. During playback, press REPEAT to select [A-] at the beginning of the portion you wish to repeat. 2. Press ENTER (b) at the end of the portion. Your selected portion will be repeated continually. 3. To return to normal playback, press REPEAT repeatedly to select [Off ]. ,,Note 4 Marker Search BD DVD AVCHD MOVIE MOVIE-N REC You can start playback from up to nine memorized points.
Operating Using the search menu BD DVD AVCHD MOVIE MOVIE-N Using search menu, you can easily to find the point where you want to start playback. To search a point 1. During playback, press SEARCH to display the search menu. 51 Changing content list view MOVIE MOVIE-N MUSIC MUSIC-N PHOTO REC On the [Movie], [Music], [Photo] or [Home Link] menu, you can change the content list view. Method 1 Press red (R) coloured button repeatedly. 2. Press A/D to skip the playback 15 seconds forward or backward.
Operating Viewing content information MOVIE MOVIE-N REC The player can display the content information. 1. Select a file using W/S/A/D. 2. Press INFO/DISPLAY (m) to display the option menu. 3. Select the [Information] option using W/S, and press ENTER (b). The file information appears on the screen During movie playback, you can display the file information by pressing TITLE/POPUP. ,,Note The information displayed on the screen may not be correct compared to the actual content information.
Operating 53 On-Screen display You can display and adjust various information and settings concerning the content. Displaying content information on-screen BD DVD AVCHD MOVIE MOVIE-N REC 1. During playback, press INFO/DISPLAY (m) to show various playback information. 2. Select an option using W/S. 3. Use A/D to adjust the selected option value. 4. Press RETURN (x) to exit the On-Screen display. ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears.
Operating Playing from selected time BD DVD AVCHD MOVIE MOVIE-N REC BD DVD AVCHD MOVIE MOVIE-N REC 1. Press INFO/DISPLAY (m) during playback. The time search box shows the elapsed playing time. 1. During playback, press INFO/DISPLAY (m) to display the On-Screen display. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. 3. Use A/D to select desired audio language, audio track or audio channel.
Operating 55 Watching from a different angle BD Changing the Picture Mode BD DVD AVCHD MOVIE MOVIE-N REC DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. 1. During playback, press INFO/DISPLAY (m) to display the On-Screen display. You can change the [Picture mode] option during playback. 1. During playback, press INFO/DISPLAY (m) to display the On-Screen display. 2. Use W/S to select the [Picture Mode] option. 2.
Operating Copying 7. Use W/S to select a file or a folder you wish to copy on the menu, and press ENTER (b). Copying file(s)/folder(s) to the internal hard disk drive You can copy music, photo, video file(s)/folder(s) from disc/USB storage device to the internal hard disk drive. 1. Press HOME (n). Repeat this step to select files and folders as many as you can. Select all the files and folders on the current directory. Shows all type of files on the screen. (Movie, Photo and Music) 2.
Operating 11. Use W/S/A/D to select [OK], and press ENTER (b) to start copying. 57 Copying file(s)/folder(s) from the internal hard disk drive to a USB storage device You can copy music, photo, video file(s)/folder(s) from the internal hard disk drive to a USB storage device. ,,Note Copying speed may vary depending on the file size, number of files and network condition. 1. Insert a USB device to the USB port until it fits into place. 2. Press HOME (n). 3.
Operating 8. Use W/S to select a file or a folder you wish to copy on the menu, and press ENTER (b). 12. Use W/S/A/D to select [OK], and press ENTER (b) to start copying. ,,Note Repeat this step to select files and folders as many as you can. Select all the files and folders on the current directory. Shows all type of files on the screen. (Movie, Photo and Music) Cancels the copying and returns to the previous screen. 4 Operating 9. Use W/S/A/D to select [Start], and press ENTER (b). 10.
Operating 59 Deleting a file(s)/folder(s) Naming a file/folder You can delete file(s)/folder(s) from the internal hard disk drive. You can re-name a file or a folder in the internal hard disk drive. 1. Use W/S/A/D to select a directory that files or a folders you want to delete are located. 1. Select a file or a folder contained in the internal hard disk drive. 2. Press INFO/DISPLAY (m) to display the option menu. 2. Press INFO/DISPLAY (m) to display the option menu. 3.
Operating Enjoying BD-LIVE This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). Secondary video and audio can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions in the disc.
Operating 61 ,,Note Playing movie file and VR discs yy The file requirements are described on page 10. You can play DVD-RW discs that are recorded in Video Recording (VR) format and movie files contained on a disc/HDD/USB device. yy Unfinalized DVD VR format discs may not be played in this player. 1. Press HOME (n). yy You can use various playback functions. Refer to pages 45-55. yy Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs.
Operating Changing subtitle code page MOVIE MOVIE-N If the subtitle is not displayed properly, you can change the subtitle code page to view the subtitle file properly. Viewing a photo You can view photo files using this player. 1. Press HOME (n). 1. During playback, press INFO/DISPLAY (m) to display the On-Screen display. 2. Use W/S to select the [Code Page] option. 3. Use A/D to select desired code option. 2. Select [Photo] using A/D, and press ENTER (b). 3.
Operating 63 To play a slide show Options while viewing a photo Press d (PLAY) to start the slide show. You can use various options while viewing a photo in full screen. To stop a slide show Press Z (STOP) during slide show. To pause a slide show 1. While viewing a photo in full screen, press INFO/ DISPLAY (m) to display the option menu. 2. Select an option using W/S. Press M (PAUSE) during slide show. Press d (PLAY) to re-start the slide show.
Operating Listening to music during a slide show 8. Use W/S to select a file or a folder you wish to play. You can display photo files while listening to music files. 1. Press HOME (n). Select a folder and press ENTER (b) to display the lower directory. 2. Select [Photo] or [Home Link] using A/D, and press ENTER (b). 3. Select [Disc], [USB] or [HDD] option using W/ S, and press ENTER (b). 4 Select g and press ENTER (b) to display the upper directory.
Operating 65 Listening to music This player can play Audio CDs and music files. 1. Press HOME (n). Audio CD Archiving You can record one desired track or all of the tracks in Audio CD to the internal hard disk drive or a USB storage device. 1. Press OPEN/CLOSE(B), and place an Audio CD on the disc tray. Press OPEN/CLOSE(B) to close the disc tray. The playback starts automatically. 2. Press INFO/DISPLAY (m) to display the option menu. 2. Select [Music] using A/D, and press ENTER (b). 3.
Operating Enter folder name using virtual keyboard, and press ENTER (b) while [OK] is selected. 8. Use W/S/A/D to select [OK], and press ENTER (b) to start Audio CD archiving. If you want to stop in progressing Audio CD archiving, press ENTER (b) while [Cancel] is highlighted. 9. A message appears when Audio CD archiving is completed. Press ENTER (b) to check the audio file created in the destination folder.
Operating ,,Note yy The player must be connected to the broadband internet for accessing the Gracenote Media Database. yy If the music information is not in the Gracenote Media Database, message appears on the screen. yy If the information from the Gracenote Media Database is either not correct or does not exist, please contact www.gracenote.com for support. yy Depending on the cases, it will takes a few minutes to load music information from the Gracenote Media Database.
Operating Songs – All audio files stored in the internal hard disk drive are sorted by name in alphabetical order. Genres – Audio files stored in the internal hard disk drive are sorted by genre information from Gracenote Media Database. Artists – Music stored in the internal hard disk drive are sorted by artist name from Gracenote Media Database in alphabetical order. Albums - All music stored in the internal hard disk drive are sorted by album title from Gracenote Media Database in alphabetical order.
Operating Deleting an audio file from your playlist 1. On the Music Library menu, use W/S to select [PlayList], and press ENTER (b). 2. Use W/S to select [My Playlist] option, and press ENTER (b) to display your playlist. 3. Press INFO/DISPLAY (m) to display the option menu. 4. Use W/S to select [Delete from playlist] option, and press ENTER (b) to display the [Delete from Playlist] menu. 5. Use W/S to select a file you wish to add to the playlist, and press ENTER (b).
Operating ,,Note Accessing a DLNA media server yy The file requirements are described on page 10. 1. Check the network connection and settings (pages 20-24). yy You can use various playback functions. Refer to pages 45-55. 2. Press HOME (n).
Operating 71 About Nero MediaHome 4 Essentials yy Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16bit colour settings Nero MediaHome 4 Essentials is a software for sharing movie, music and photo files stored on your computer to this player as a DLNA-compatiable digital media server. yy Windows® Internet Explorer® 6.
Operating Sharing files and folders On your computer, you must share the folder that contains the movie, music and/or photo content to play them using [Home Link] features. This part explains the procedure for selecting the shared folders on your computer. 1. Double-click the “Nero MediaHome 4 Essentials” icon on the desktop. 2. Click [Network] icon on the left and define your network name in the [Network name] field. The Network name you enter will be recognized by your player. 3.
Operating ,,Note yy The file requirements are described on page 10. yy You can use various playback functions. Refer to pages 45-55. yy The thumbnail of the unplayable files can be displayed in the [Home Link] menu, but those cannot be played on this player. yy If there is an unplayable music file in the [Home Link] menu, the player will skips the file and play the next file. yy The subtitle file name and movie file name have to be the same and located at the same folder.
Operating Using the Netcast You can use various content services via Internet with the Netcast feature. 1. Check the network connection and settings (pages 20-24). 2. Press HOME (n). 3. Select the [Netcast] using A/D, and press ENTER (b). 4. Select an on-line service using W/S/A/D, and press ENTER (b). 4 ,,Note Operating yy Detailed information of each service, contact to the content provider or visit suppot link of the service.
5 Troubleshooting Troubleshooting 75 Troubleshooting General Symptoms Cause & Solution The Power does not turn on. yy Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional code.) yy Place the disc with the playback side down. yy Place the disc on the disc tray correctly inside the guide. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed.
Troubleshooting Picture Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the unit. Change the resolution to one that your TV accepts.
Troubleshooting 77 Network Symptom Cause & Solution BD-LIVE feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see pages 20-24). yy Your broadband speed may not be fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed to suit the unit’s requirements.
Troubleshooting Recording Symptom Cause & Solution Cannot record or does not record successfully. yy Check the remaining space on the HDD. yy If your source is copy-protected, you cannot record it using this recorder. yy If you set a DTV rating for the recorder and higher rated digital programs are received, the programme cannot be recorded. Change the DTV rating level in order to record it. Timer record does not record successfully. yy Clock is not set to correct time.
REC. TIMER REC. Appendix Controlling a TV with the Supplied Remote Control DISC MENU REC.LIST You can control your TV using the buttons below. MARKER SEARCH TEXT SUBTITLE AV/INPUT ZOOM VOL PR VOL PR Setting up the remote to control your TV You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. 1.
Appendix Area Code List Choose an area code from this list.
Appendix 81 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and Licenses Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. YouTube™ is a trademark of Google Inc. Picasa™ Web Albums is a trademark of Google Inc. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.
Appendix 83 Gracenote®, Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries. Music recognition technology and related data are provided by Gracenote®. Portions of the content is copyright © Gracenote or its providers. Gracenote® End User License Agreement This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”).
Appendix Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Software Update You can update the player using the latest software to enhance the products operation and/or add new features.
Appendix 85 5. Select [OK] to start update. (Selecting [Cancel] will end the update.) >>Caution Do not turn off the power during the software update. ,,Note If the software includes the driver update, disc tray may open during the process. 6. When update is completed, the message, “Update is complete.” will appear, and then power will turn off automatically after 5 seconds. 7. Turn the power back on. The system now operates with the new version.
Appendix Audio Output Specifications Jack/Setting Source Dolby Digital Digital Output (SPDIF) (DIGITAL AUDIO OUT) *4 Analog 2CH Output PCM Stereo DTS Re-encode*3 *5 Primary Pass-Thru PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.
Appendix *5 If the [HDMI] or [Digital Output] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5.1Ch. If the [HDMI] or [Digital Output] option is set to [DTS re-encode], the DTS Re-encode audio is output for BD-ROM discs, and the original audio is output for the other discs, files and broadcast signal (like [Primary Pass-Thru]).
Appendix Video Output Resolution When the non-copy protected media is playing back Video Out Resolution HDMI OUT COMPONENT VIDEO OUT HDMI connected HDMI disconnected 576i 576p 576i 576p 576p 576p 720p 720p 720p 1080i 1080i 1080i 1080p/24 Hz 1080p / 24 Hz 576i 1080i 1080p / 50 Hz 1080p / 50 Hz 576i 1080i When the copy protected media is playing back Video Out Resolution 6 HDMI OUT COMPONENT VIDEO OUT HDMI connected HDMI disconnected 576i 576p 576i 576p 576p 576p 720p 7
Appendix 89 Specifications General Power requirements AC 200-240 V, 50/60 Hz Power consumption 45 W Dimensions (W x H x D) Approx. 430 x 49 x 295 mm) without foot Net Weight (Approx.) 3.33 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Television system: DVB-T Standard Compliant TV Recording Recording format TS (Transport Stream format) Recordable media Hard Disk Drive (250GB/500GB), USB 2.0 HDD Audio recording format Dolby Digital (2CH) Connectors 1.
Appendix Maintenance Notes on Discs Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion.
Warranty 91 Technology with the human touch GUARANTEE yy LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee. 1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase. 2.
