Operation Manual

4 Troubleshooting
Troubleshooting16
Troubleshooting
4
Troubleshooting
General
Symptoms Cause & Solution
The Power does not turn on.
y
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
y
Insert a playable disc. (Check the disc type, color system, and regional
code.)
y
Place the disc with the playback side down.
y
Place the disc on the disc tray correctly inside the guide.
y
Clean the disc.
y
Cancel the Rating function or change the rating level.
The angle cannot be changed.
y
Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
audio les.
y
The les are not recorded in a format that the unit can play.
y
The unit does not support the codec of the movie le.
The remote control does not
work properly.
y
The remote control is not pointed at the remote sensor of the unit.
y
The remote control is too far from the unit.
y
There is an obstacle in the path between the remote control and the
unit.
y
The batteries in the remote control are exhausted.
Recording
Symptom Cause & Solution
Cannot record or does not
record successfully.
y
Check the remaining space on the HDD.
y
If your source is copy-protected, you cannot record it using this
recorder.
y
If you set a DTV rating for the recorder and higher rated digital
programs are received, the programme cannot be recorded. Change
the DTV rating level in order to record it.
Timer record does not record
successfully.
y
Clock is not set to correct time.
y
The start time of the timer recording is past.
y
When setting the recording programme, make sure you set the
recorder’s built-in tuner, not the TV’s built-in tuner.
y
If the HDD is damaged, the recording may not complete successfully.
You cannot enter a timer
programme when.
y
The time you’re trying to set has already passed.
y
There are already 32 timer programs set.
If two or more timer programs
overlap.
y
The earlier programme takes priority.