User guide

Using Multi-Room12

Using Multi-Room

Step 3. Initial Multi-Room Setup

When installing the MUSICow product for the rst time, you can choose two types of connection as below.

Option 1. Wired connection (MUSICflow Mesh Network Connection)

Connect the one of MUSICow products (sound bar, speaker or bridge) to the home router using LAN cable.

Then you can connect the additional MUSICow products (Optional) to your home network wirelessly

(MUSICow Mesh Network). Refer to “Step 4. Add Speakers (Optional)” on page 14.

If you have a bridge

Bridge (Wired Connection)

Sound bar (Add speaker)

Other speakers (Add speaker)

If you do not have a bridge

Sound bar (Wired Connection)

Other speakers (Add speaker)

LAN Cable

Simple Setup Guide (Wired Connection)

1. Ensure that your smart device is connected to your Wi-Fi network.

2. Launch Music Flow Player App and follow “Wired Connection” instructions on set-up wizard.

3. Connect LAN cable from router to any one of MUSICflow product (sound bar, speaker or bridge).

4. Power on the MUSICflow product and wait until you see a white LED become solid.

5. If you install successfully, update speaker software to the latest:

[Application Menu

Settings

Version Info]

m Tip

Separated from the router’s Wi-Fi environment, composes wireless network among MUSICow products.

Using MUSICow mesh network, Wireless coverage is expanded, which oers stable music streaming service.

In the below case, MUSICow Mesh Network connection is recommended.

1. When the Wi-Fi coverage cannot reach whole house because home router performace is unstable.

(In case that your home router supports only 802.11 b/g 2.4 GHz.)

2. When you want to enjoy MUSICflow system in stable wireless network environment.

3. When you want to use in below mode.

1) Multi-Room & Group-play Mode

2) Home Cinema Mode

3) Hi-Fi (24 bit/192 kHz) Mode : When you enjoying the high-quality audio source (ex: flac)