User guide

Using Multi-Room 15
Using Multi-Room
3
,
Note for Multi-Room Setup
y
You can make all wireless/wired connection according to the location of the router. But we recommend
that you connect the rst speaker or bridge to the router using LAN cable and connect additional
speakers for network stability.
y
When the “Firmware update”pop-up appears on Music Flow Player App, touch to start updating.
y
If you connected a speaker with a LAN cable and installed additional speakers: If there is a speaker with
frequent sound breaking it may not be close enough with the LAN cable connected speaker, install an
additional Bridge or another speaker in a middle location between the LAN cable connected speaker and
the speaker with sound breaking and try again.
y
Even if you connected speakers with MUSICow mesh network, music sound breaks by ambient signal
interference causing Wi-Fi network defect. In this case, you can try to change Mesh network channel of
MUSICow system at the [Settings
à
Advanced settings
à
Mesh Network Channel]
y
When making connection, “Mesh network composition” may appear and it takes about 30 seconds. This
message appears once in rst installation but may appear again when you change network environment.
y
If you set up multiple speakers using standard wireless connection mode, we recommend that you
choose any speaker or bridge which can be installed near the home router with wired LAN cable and start
[Settings
à
Advanced settings
à
Mesh network composition ].
Using the Bridge
1. Use as a root device (wired to the home router)
When your home router is located too far from any speaker location that is to be connected via wired mode:
a
According to “Simple Setup Guide (Wired Connection)”, connect the Bridge to your home router with
LAN cable.
b
According to “Simple Setup Guide (Add Speakers)“, add MUSICflow products to your home network.
b
a
Bridge
2. Use as a wireless extender
When you want to expand MUSICow mesh network coverage:
Preperation: Initial MUSICow product is connected to your home router with LAN cable.
a
According to “Simple Setup Guide (Add Speakers)“, add the Bridge to your home network.
b
According to “Simple Setup Guide (Add Speakers)“, add MUSICflow products to your home network.
Bridge
a
b