HS8 SMART Hi-Fi AUDIO Wireless Multi-room Sound Bar ENGLISH | OWNER’S MANUAL To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. The actual product may differ from the image. MODEL LAS855M www.lg.
Getting Started Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Getting Started 5 Declaration of Conformity LG Electronics European Shared Service Center B.V. Krijgsman 1 1186 DM Amstelveen The Netherlands or can be requested at our dedicated DoC website: http://www.lg.com/global/support/cedoc/cedoc# This device is a 2.4 GHz and 5 GHz wideband transmission system, intended for use in all EU member states and EFTA countries, with indoor use restriction for 5 GHz band.
Table of Contents Table of Contents 27 43 Connecting the speaker to your Home Network – Connecting the speaker to your network with a LAN cable – Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) – Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connecting the speakers to your Home Network (Additional) – Connecting the additional speaker to your network with a LAN cable – Connecting the additional speaker to your network via the Wi-Fi Setup Method Usi
Table of Contents 59 60 61 62 62 63 63 63 63 64 64 64 64 65 65 65 65 66 66 66 66 66 67 67 67 67 67 67 – [Time Zone] Menu – [Advanced Settings] Menu – [Google Cast] Menu – [Version Info.
Getting Started Main Features 1 Getting Started Made for iPod/iPhone/iPad or Android device Enjoys music from iPod/iPhone/iPad or Android device with simple connection. LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. Portable In Listens to music from your portable device. Music Flow Player application Listens to music stored on your smart device.
Getting Started 9 Accessories Please check and identify the supplied accessories. Remote control (1) Batteries (2) AC adapter (1) Power cord (1) Wall bracket (2) Wall bracket install guide (1) Screws (2) Cable ties for arranging cables (4) Foot Optical Cable holder 1 Getting Started Designs and specifications of the accessories are subject to change without prior notice.
Getting Started Front panel 1 Getting Started A Display window D The buttons are located on the rear. B LED indicator Shows connection status. C Remote sensor Rear panel A 1/! (Standby/On) - Power On - Switching to the standby mode (page 67) F (Function) Selects the function and input source. p/o (Volume) Adjusts volume level. (Wi-Fi) Connects your speaker to your network. (page 30) (Add) Adds the speaker to your network.
Getting Started Remote control 11 • • • • • • • • • • a • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. / Switches to the standby mode. FUNC : Selects the function and the input source. (Mute) : Mutes the sound. : Adjusts sound level of Treble, Bass and Subwoofer. VOL o/p : Adjusts speaker volume. • • • • • • • • • • b • • • • • • • • • • REPEAT : Listen to your music repeatedl-y. C/V (Skip) : - Skips Fast backward or Forward. dM (Play/Pause) : Starts playback.
Getting Started Installing the sound bar 1 Getting Started You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. Place the unit in front of the TV and connect it to the device you want. (Refer to pp. 16 - 21) You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit. Turn it slightly toward the center of the room to reduce the wall reflections. 1. Turn the unit upside down. 2.
Getting Started 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. 13 5. Put the unit on the brackets to match screw holes on the bottom of the unit. TV 1 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill. ,,Note To detach the unit, perform it in reverse order.
Connecting Organizing cables Organize the cable with cable holder. 1. Remove the protective vinyl of the sticker. 2 Connecting the AC Adapter 2. Attach and fix the cable holder as shown below. Connect the speaker to the power supply with the supplied AC adapter. 3. Insert cables to the cable holder and lock the cable holder. 1. Connect the supplied AC power cord to the AC adapter. Connecting 2. Connect the AC adapter cable to DC IN adapter input. 3. Plug the AC power cord into an AC outlet.
Connecting Wireless subwoofer connection 15 3. If the LED of the wireless subwoofer already blinks in green continually, you can skip this step. Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. LED indicator of wireless subwoofer Status Green (Blink) The connection is trying. Green The connection is completed. Red The wireless subwoofer is in standby mode or the connection is failed. Off (No display) The power cord of wireless subwoofer is disconnected.
Connecting Connecting to your TV Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the TV. Using an OPTICAL cable 2 Connecting 1. Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable. LG Sound Sync You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync.
Connecting 17 With wired connection Using an HDMI cable 1. Connect your LG TV to the unit by using an optical cable. If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. Connect the HDMI OUT (TV ARC) jack on the back of the unit to ARC jack on the TV using an HDMI cable. Optical cable 2 2.
Connecting What is SIMPLINK? HDMI cable Checklist Some HDMI cables do not support the ARC function, this can result in no sound output. When connecting this unit to the TV, if there is no sound, there might be a problem with the HDMI cable. Therefore connect this unit to the TV and check whether the Type A, High speed HDMI™ Cable with Ethernet.
Connecting 19 ARC (Audio Return Channel) function Additional information for HDMI The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit. yy When you connect an HDMI or DVI compatible device make sure of the following: To use this function : -- Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On. -- You must use the HDMI cable (Type A, High Speed HDMI™ cable with Ethernet).
Connecting Optional equipment connection For enjoying both sound and picture You can enjoy both sound and picture from the external device you connect. HDMI connection For enjoying sound only 2 Connecting You can enjoy the sound from the external device you connect. To the Blu-ray disc player, DVD player, etc. 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the audio device such as Bluray disc player, DVD player, etc. 2. Set the input source to HDMI IN.
Connecting PORT. (Portable) IN connection 21 OPTICAL IN connection Connect an optical output jack of external devices to the OPT. IN jack. Optical cable Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect the portable player to the PORTABLE IN connector of the unit. 2. Turn the power on by pressing 1 (Power). 3.
Connecting 2 Initial Multi-Room Setup Installing “Music Flow Player” App When installing the MUSICflow product for the first time, you can choose two types of connection as below. Through “iTunes store” or “Google Play Store” Connecting Wired connection (MUSICflow Mesh Network Connection) Connect your speaker to the home router using LAN cable. Then you can connect the additional MUSICflow products (Optional) to your home network wirelessly.
Connecting 23 ,,Note yy Make sure that your smart device is connected to the internet. 3. Select [Connect product] to install the speaker you’ve purchased. yy Make sure that your smart device has a scanning application. If you don’t have, download it from “iTunes store” or “Google Play Store”. Starting with Music Flow Player app 1. Check the contents of terms of use and select [Accept]. Refer to “Connecting the speaker to your Home Network” on page 27.
Connecting 1. Plug in the desired device, and tap [Next]. 4. After typing password, tap [Next]. 2 Connecting 2. App searches for the speaker and connects it automatically, Tap [Next]. 5. Tap [Finish] to finish making the connection. or 3. If the network password is set, security screen is displayed. Type the password. After finishing, TV connection screen is displayed. Follow the direction on the screen.
Connecting 25 ,,Note Using Media Server for PC yy Music Flow PC Software is not supported with Mac OS. In case of Mac OS, you can use the Nero MediaHome. Media server Software allows users to access audio files stored in media server and enjoy them on this speaker via home networking. yy The Music Flow PC Software is a customized software edition only for sharing files and folders to this speaker. Before connecting to PC to play a file, Media server Software should be installed on your PC.
Connecting Nero MediaHome 4 Essentials for Mac OS System requirements (Macintosh) About Nero MediaHome Essentials yy Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone Nero MediaHome 4 Essentials is a software for sharing video, audio and photo files stored on your computer to this speaker as a digital media server. 2 Connecting Downloading Nero MediaHome Essentials 1. Start up your computer, visit http://www.lg.com. If necessary, select your region.
Connecting 27 Connecting the speaker to your Home Network Connecting the speaker to your network with a LAN cable Connection overview Using a wired network provides the best performance, because the attached devices connect directly to the network without radio frequency interference. Broadband service 2 Preparation Router yy Make sure that wireless network environment using a router is installed at your home. yy Make sure that the speaker and the smart device are connected to the same router.
Connecting 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 5. Connect one end of the LAN cable to the speaker’s LAN port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. 2 Connecting 6.
Connecting 29 (If there is an update) 8. This application is checking the Version of software of your speaker and then shows the version. ,,Note yy You cannot use the speaker without a router. When using the wired router, you can control the speaker with Music Flow PC Software. (Page 25) yy The speaker and the smart device should be connected to the same router. 2 Connecting Select [Next] after checking the version information. 9. Select [Start] to curate your music on your smart device.
Connecting Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) Connection overview 2 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. Broadband service Connecting Router 3. Select the product you want to connect and tap [Next] on the screen. 4.
Connecting 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 31 9. Then select [Next] on the screen. 2 8. If you have a password for your network, the security screen appears on your smart device. Enter your password. Connecting 7. Then select [Next] on the screen. 10. Select [Finish] to complete the connection. After speaker connection, follow the instructions for TV connection.
Connecting (If there is an update) 11. This application is checking the Version of software of your speaker and then shows the version. 2 Connecting Select [Next] after checking the version information. 12. Select [Start] to curate your music on your smart device. ,,Note If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again.
Connecting 33 Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connection overview 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. Broadband service 2 Connecting Router 3. Select the product you want to connect and tap [Next] on the screen. 4.
Connecting 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 8. On your iOS device, go to iOS setting -> WiFi setting and select “MusicFlow_Setup” to connect. 2 Connecting 7. Then select [Next] on the screen. ,,Note yy If “MusicFlow_Setup” is not on the list, scan for available Wi-Fi networks again. yy When your smart device is connected to “MusicFlow_Setup”, you cannot use the internet. 9.
Connecting 35 10. Then select [Next] on the screen. ,,Note If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again. 2 12. Select [Complete] to complete the connection. Connecting 11. Then select [Next] on the screen.
Connecting Notes on Network Connection yy Many network connection problems during set up can often be fixed by re-setting the router. After connecting the speaker to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting 37 Connecting the speakers to your Home Network (Additional) Connecting the additional speaker to your network with a LAN cable Connection overview You can enjoy the music with multiple speakers and single smart device you have. Broadband service Requirements 2 ,,Note Signal interference may lead to stop playback.
Connecting 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 27. 4. Plug in the desired device, and tap [Next]. 2. On your smart device, select the Music Flow Player app. Tap the [Home] menu. 2 Connecting 5. Select the product you want to connect and tap [Next] on the screen. 3. Select the [Add Speaker] on the side menu. 6. Select [Wired connection] on the screen.
Connecting 39 7. Connect one end of the LAN cable to the speaker’s ETHERNET port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. Connecting the additional speaker to your network via the Wi-Fi Setup Method Connection overview Broadband service 2 LAN cable 8. Then select [Next] on the screen. Speaker (Main) Speaker (Add) 9. Select [Finish] to complete the connection.
Connecting 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 27. 4. Select the product you want to connect and tap [Next] on the screen. 2. On your smart device, select the Music Flow Player app. Tap the [Home] menu. 2 Connecting 5. Select [Wireless connection] on the screen. 3. Select the [Add Speaker] on the side menu. 6. Press the ADD button on the rear of the speaker (Add). Then Network status LED blinks red.
Connecting 7. Then select the [Next] on the screen. 41 Using the Bridge Use as a root device (wired to the home router) When your home router is located too far from any speaker location that is to be connected via wired mode, connect the Bridge (R1) to your home router with LAN cable. 8. Select [Finish] to complete the connection. a Bridge (R1) 1. Attach the power cord to the power port on the rear of the Bridge (R1) and then plug the power cord into an electrical outlet. 2.
Connecting 3. Select the [Bridge] and tap [Next] on the screen. 6. Select [Finish] to complete the connection. 4. Select [Wired connection] on the screen. 7. Connect the speaker to Music Flow R1. Refer to the “Connecting the speakers to your Home Network (Additional)” on page 37. 2 Connecting 5. Connect one end of the LAN cable to the Bridge’s ETHERNET port, and connect the other end to your wireless router. Wait a moment until Network status LED stops blinking and stays white.
Connecting 43 Use as a wireless extender 3. Select the [Add Speaker] on the side menu. When you want to expand MUSICflow mesh network coverage, add the Bridge (R1) to your home network. b a 2 If you want to use this connection, Initial MUSICflow product is connected to your home router with LAN cable. 1. Attach the power cord to the power port on the rear of the Bridge (R1) and then plug the power cord into an electrical outlet. ,,Note You can also add another speaker as below. 2.
Connecting 5. Then select the [Next] on the screen. 2 Connecting 6. Select [Finish] to complete the connection.
Operating 45 Enjoying the Music with Music Flow Player app Overview of Home menu Launch Music Flow Player app on your smart device. The [Home] appears. With Music Flow Player app, you can play music in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. 1.
Operating Edit the Online streaming Service list 1. Launch Music Flow Player app on your smart device. The [Home] appears. Overview of the side menu 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the [Home] menu. 2. Tap the [EDIT] menu. 3 Operating 3. Side menu appears. yy Select the checkbox of the Online service you want to see on Home. a Home – Displays the Home menu. yy Drag upwards or downwards to change the order of the Online service.
Operating 47 Playing a song 5. Select the desired song. Then selected song is displayed and played. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the [Home] menu. ,,Note 4. Select the desired album. 3 Operating 3. Side menu appears. Select the [My Phone] on the side menu. If the speaker is not selected, the selecting speaker pop-up appears. Select a desired speaker.
Operating Managing a playlist Overview of Playback On an album screen, tap the [ ] of the desired song. The pull down menu appears. You can confirm and adjust various information on the playback screen. 3 Operating a Displays the speaker that music plays through. Displays current playing music. b - Repeats the desired contents. Every time you click it, the state changed in the (Repeat One) (Repeat All) (Repeat Off ) order. - Shuffles the music on the list. Music will be played in random order.
Operating 49 Selecting Sound effect Sound Effect Description This speaker has a number of pre-set surround sound fields. You can select a desired sound mode by tapping [ ]. ASC The displayed items for the equalizer may be different depending on sound sources and effects. Analyzes the property of input sound and provides the sound optimized for the content in real time. Standard You can enjoy optimized sound. 1.
Operating Different ways of listening to music There are a number of differing ways of listening to music : Group, Surround and Seamless playbacks. ,,Note 3 If you want to enjoy the group playback and Surround playback, it is recommended that at least one speaker is connected by LAN cable. To change speaker connection setting when all the speaker have been already connected wirelessly, reset all the speaker and connect again after connecting the one speaker of them.
Operating 3. Grouping option appears. Tap the checkbox to select the speaker you want to play with. Then select [OK]. 51 Surround Sound Mode (Home Cinema Mode) Simply add a LG MUSICflow sound bar to your network and synchronize it with your LG MUSICflow speakers to enjoy a home cinema system experience. 1. Select [Connected Speakers] on the side menu of Music Flow Player app. 3 Operating 4. The speakers is ready to group playback. 2. Connected speakers appear. Select the [ ] on the speaker.
Operating 3. Surround environment option appears. Select the left and right speakers by tapping connected speakers. Then select [OK]. ,,Note yy It is recommended to set the surround speakers to same models. yy The weak signal because of the long distance between speakers or wireless router and signal interference may cause abnormal playback. yy Depending on your wireless environment, the grouping may be broken.
Operating 53 Seamless playback You can easily change the playing speaker from your smart device or the speaker to the another speaker without pause. Changing playing speaker from a smart device to a speaker ,,Note yy It is not supported when you go out of the house with your smart device. yy Wi-Fi function on smart device must be turned on. yy If the source is Portable In and Bluetooth, seamless play is not supported. (Media server and online streaming service are supported).
Operating Using LG HomeChat ,,Note yy For more information, see http://homechat.lge.com. yy Depending on the region, the LG HomeChat service may not be available. About LG HomeChat How to start LG HomeChat Step 1. Install LINE Please check if “LINE” application is installed on your mobile device, and if not, search and install “LINE” from your application market(Google Play Store, Apple App Store, etc.).
Operating 55 Step 4. Connect audio to LG HomeChat 1. To control your home appliance(s) through HomeChat, you need to make sure that the smart device installed Music Flow Player and the speaker are connected to the same Wi-Fi network and first register your speaker. Enter “Register” for a link for product registration. Usage Examples Audio quick button If you haven’t installed Music Flow Player app already, refer to Installing “Music Flow Player” App on page 22. 2.
Operating Mood station Setting the Speaker with Music Flow Player app With Music Flow Player app, you can set the connected speaker in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version.
Operating 57 Overview of setting menu [General] Menu 1. Launch Music Flow Player app on your smart device. Sets for easier use of the speaker. 2. Select [Settings] on the side menu. Lock Screen Setting (Android only) This function allows you to display the Music Flow Player on the lock screen. (Lock screen setting is [ON] by default.) ,,Note [Lock Screen Setting] may differ from Music Flow Player app depending on the application’s version.
Operating [Speakers] Menu a Rename – Renames the speaker. You can adjust speakers connected to your network. b Speaker LED – Turns on or off speaker’s LED indicator. c IP Info. - Shows the IP address of the speaker. Compressed sound transmission – Adjusts d the compression of audio source according to network status. 3 Operating e DRC – Turns on or off DRC function. (Page 64) f Night – Turns on or off Night Mode function. (Page 66) g Auto Volume On/Off – Turns on or off Auto Volume function.
Operating 59 [Alarms/Sleep Timer] Menu [Music Library] Menu Turns on and off the speaker at a designated time. Manages the music library index. Alarms Sync Schedule Speaker will let you know when it is time. You can set the time to update the Music index automatically. Select the days and time to perform the update. (Sync Schedule is [OFF] by default.) Deletes selected alarm. Adds new alarm. Sync Sleep Timer Manages the music library index. Sets a time to automatically turn off the speaker. 1.
Operating [Advanced Settings] Menu Mesh Network Channel If normal playback or group playback is not smooth using multiple speakers including wireless speaker connection, changed the mesh network channel to improve network speed. 1. Select the [Settings] -> [Advanced Settings] option. ,,Note yy The speaker is disconnected temporarily during the channel changing. yy If you changed the channel when the speaker turned off, turn on and add it again.
Operating 2. Tag the smart device to LG Music Flow to play for about 1 second. 61 [Google Cast] Menu Learn how to cast Shows to use Google Cast. Google Cast-enabled apps Shows available apps on Google Cast. Legal information Select [Google Terms of Service], [Google Privacy Policy] or [Open source license] to show the selected information. 3 Sensitivity Settings -- Place your smart device close enough to the tag on the speaker. It is recommend to be within about 2 inches.
Operating [Version Info.] Menu [Open source licenses] Menu Updates the speaker to the latest version. Shows LGE Open Source Software Notice. App version info. Displays the current application’s version. Device version info. Updates the latest speaker’s firmware version. 1. Find the speakers need to update and tap the [ ]. 3 Operating 2. Starts the software update.
Operating 63 Using a Bluetooth Wireless Technology 1. Select the Bluetooth function by using FUNC on the remote control or F on the unit until the function is selected. Appears “BT” and then “BT READY” in display window. About Bluetooth 2. Operate the Bluetooth device and perform the pairing operation. When searching for this speaker on your Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device.
Operating ,,Note yy When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However it may not work well in the case below : -- There is a obstacle between the unit and the bluetooth device. -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device. 3 yy This unit supports Bluetooth auto pairing.
Operating 65 Turn off the sound temporarily Auto power down Press This unit will turn itself off to save electric consumption when the main unit is not connected to an external device and is not used for 20 minutes. (Mute) to mute your unit. You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window. To cancel it, press (Mute) again on the remote control or change the volume level.
Operating AUTO POWER On/Off This unit automatically turns on and off by an input source : Optical. When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and selects the optical function. You can hear the sound from your device. This function turns on or off each time you press AUTO POWER.
Operating 67 Standby mode Bluetooth standby mode The speaker switches to the standby mode if there is no music playback or no button operation. If the Bluetooth standby mode is set to ON, the speaker switches Bluetooth standby mode when is turned off. Standby mode When you turn on the main unit in the Bluetooth standby mode, Bluetooth and LG TV are able to connect even if network is not connected. Option 1. Option 2.
Troubleshooting Troubleshooting General Symptoms Cause & Solution The unit does not work properly. yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. The power does not turn on.
Troubleshooting 69 Symptoms Cause & Solution When you feel the output sound of the unit is low. Check the details below and adjust the unit according to them. yy Switch [ON] state of DRC function to [OFF] by using remote controller. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Troubleshooting Application and PC Software Symptoms Cause & Solution Music Flow Player app doesn’t work properly. Does an error occur when accessing the app? yy Make sure that your smart device is compatible with the app. yy Make sure that the Music Flow Player app is the latest version. yy Make sure that the speaker’s front LED turns from red to white. Music Flow PC Software doesn’t work properly.
Appendix 71 File requirement Available File extensions : “.mp3”, “.wma”, “.flac”, “.m4a”, “.aac”, “.ogg”, “.wav” Sampling frequency: within 32 to 48 kHz (mp3, wma), up to 192 kHz/24 bit (flac) Bit rate: up to 320 kbps (mp3, wma) yy The file requirements are not always compatible. There may have some restrictions by file features and media server’s ability. yy Some wav files are not supported on this speaker. yy Depending on the types of file or ways of recording, it may not play back.
Appendix Specifications General Power Supply 25 V 0 2 A (AC adapter) 45 W Power consumption Networked standby : 5.8 W (If all network ports are activated.) AC adapter Model : DA-50F25 Manufacturer: Asian Power Devices Inc. Input: 100 - 240 V ~ 50/60 Hz Output: 25 V 0 2 A Dimensions (W x H x D) (1200 x 43 x 82) mm (without Foot) Net Weight (Approx.) 2.7 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Input/Output 5 Appendix OPT.
Appendix 73 System ETHERNET (LAN) port Ethernet jack x 1, 10 BASE-T/100 BASE-TX Wireless LAN (Internal antenna) Integrated IEEE 802.11n (Draft 2.0) wireless networking access, compatible with 802.11a/b/g/n Wi-Fi networks. Bluetooth Version 4.0 Codec SBC yy Designs and specifications are subject to change without prior notice.
Appendix Handling the Speaker When shipping the speaker Please save the original shipping carton and packing materials. If you need to ship the speaker, for maximum protection, re-pack the speaker as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the speaker. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the speaker for a long period of time.
Appendix 75 TERMS OF USE or any part of the Services where we consider it reasonably necessary for technical, operational, security, legal or regulatory reasons. These Terms of Use apply to those individuals and groups who use LG’s Multiroom Speaker (LG Mutiroom Speaker), any software(s) associated with LG Multiroom Speaker, this application and any services associated this application (collectively “LG Software”).
Appendix may be subject to the provider’s own terms and conditions and privacy policy. We encourage you to read these documents, although we are not responsible for their content. We do not accept any responsibility for apps, services or content provided by third party providers. We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability.
Appendix 77 If you have any questions or comments about these Terms of Use please contact www.lg.com. These Terms of Use may be updated by LGE from time to time. If we make a material change to our Terms of Use, we will update you via your LG Software or other means. OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
Appendix Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT.
LG Customer Information Center Country Telephone Austria / Österreich 0810-144131 Slovenia / Slovenija 080-543543 Benelux 0900 543 5454 (NL) 015 200 255 (BE) Schweiz / Suisse / Svizzera / Switzerland 0848-543543 České republiky nebo Slovenské republiky / Českej republiky alebo Slovenskej republiky CZ: 810 555 810 SK: 0850 111 154 Deutschland 01806 11 54 11 España 963 05 05 00 France 3220 Ελλάδα 801 11 200 900 210 4800 564 Italia 199600099 Polska 801 54 54 54 Portugal 808 785 454 Ro
