ENGLISH PORTUGUÊS FRANÇAIS OWNER’S MANUAL DVD Home Theater System Please read this manual carefully before operating your set and retain it for future reference. HT156DD(HT156DD, SH16DD-S/W) P/NO : MFL67233880 HT156DD-F0-AMARLLK-ENG.indd 1 11. 07.
HT156DD-F0-AMARLLK-ENG.indd 2 11. 07.
Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents Table of Contents 4 Operating Basic Operations General Playback – On-Screen display – General operation Advanced Playback – Movie – Music Sound adjustment – Setting the surround mode – Photo Radio Operations – Listening to the Radio – Presetting the Radio Stations – Deleting all the saved stations – Improving poor FM reception 1 Getting Started 3 6 6 6 6 6 7 7 8 9 9 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories –
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual A section whose title has one of the following symbols is applicable only to the disc or file represented by the symbol.
Getting Started File compatibility 7 Photo Files Photo size: Less than 2M recommended. Overall y The file name is limited to 35 characters. y Depending on the size and number of the files, it may take several minutes to read the contents on the media. Maximum Files/Folder: Less than 600 (total number of files and folders) CD-R/RW, DVD±R/RW Format: ISO 9660 Video Files Available resolution size: 720 x 576 (W x H) pixels Playable subtitle: SubRip (.srt/.txt), SAMI (.smi), SubStation Alpha (.ssa/.
Getting Started Remote control 1 Getting Started PLAY (d) MO./ST. : Starts playback. Selects Mono/ Stereo. EQ$ (EQUALIZER effect) : Chooses sound impressions. STOP (Z): Stops playback. REC (X) : USB Direct Recording. • • • • • • c • • • • • DISPLAY: Accesses or exits OnScreen Display. PRESET (WS) : Selects programme of Radio. MENU: Accesses or exits the DVD menu. TUN (-/+) : Tunes in the desired radio station. w/s/a/d: Navigates the menus. ENTER (b): Confirms menu selection.
Getting Started 9 Front panel 1 Getting Started e FUN Selects the function or input source. a DVD/CD Disc Drawer b Display Window c 1 (Power) C/V (Skip) d B (Open/Close) TUNING (-/+) : Tunes in the desired radio station. D/!! (Play/Pause) f USB port You can play video, image and sound files by connecting the USB device. Z (Stop) g Volume (VOL.
2 Connecting Connecting the speakers Connections to Your TV Attaching the speakers to the unit Video Connection Connecting To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).
Connecting 11 Optional Equipment Connection USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 2 Connecting Removing the USB Device from the unit 1. Press FUNTION to choose a different function mode or press STOP (Z) twice in a row. 2. Remove the USB device from the unit. HT156DD-F0-AMARLLK-ENG.indd 11 11. 07.
System Setting Settings [DISPLAY] Menu When the unit is turned-on at the first time, you have to select the desired language. TV Aspect Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. 2. Use w/s to select the first setup option, and press d to move to the second level. 3 3. Use w/s to select a second setup option, and press d to move to the third level. System Setting 4.
System Setting [AUDIO] Menu Speaker Setup Make the following settings for the built-in channel surrounds decoder. 1. Press SETUP. 13 [Speaker] Select a speaker that you want to adjust. , Note Certain speaker settings are prohibited by the Dolby Digital licensing agreement. 2. Use WS to select AUDIO menu and then press D. [Size] 3. Use WS to select [Speaker setup] menu and then press D. Since the speaker settings are fixed, you cannot change the settings. 4. Press ENTER.
System Setting [LOCK] Menu [OTHERS] Menu Firstly, you have to create the 4-digit password on [Area Code] to use the LOCK menu. REC Bitrate If you forget your password you can reset it. First, remove the disc in the unit. Display setup menu then input the 6-digit number “210499”. The “P CLr” appear in the display window and the password is deleted. Rating Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating.
Operating Basic Operations 1. Insert the disc by pressing OPEN/CLOSE or connect the USB device to the USB port. 2. Select the DVD/ CD or USB function by pressing FUNCTION. 3. Select a file (or track/ title) you want to play by pressing WSAD. , Note When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and JPEG files together, you can select menu of files which you would like to play by pressing MENU.
Operating General Playback General operation To Do this On-Screen display ry Playback Press PLAY (z) You can display and adjust various information and settings about the content. Pause Press PAUSE/STEP (M) Stop Press STOP (Z) 1. While playback, press DISPLAY to show various playback information. 2. Select an option using w/s. 3. Use a/d and numerical button to adjust the selected option value. 4. Press RETURN(x) to exit the On-Screen display.
Operating Advanced Playback Movie ry To Do this Display disc menu Press MENU. (DVD Only) Play repeatedly Press REPEAT during playback. To select an option to be repeated, Press REPEAT repeatedly. Music tu To Do this Play repeatedly Press REPEAT during playback. To select an item to be repeated, Press REPEAT repeatedly. • TRACK / RANDOM / ALL Create or delete your own program If you add desired music file(s), press PROG./MEMO. to end edit program list.
Operating , Note • If you use this function, the “CD_REC” folder will be created automatically in the USB Flash Driver then the music file(s) is saved in it. • If you remove USB Flash Drive, turn off or open the unit while recording, it can make a malfunction. • If the remaining space on the USB Flash Drive is insufficient, the recording is not available. To increase the free space, delete files in it using your PC. • CD-G disc and Audio CDs encoded in DTS cannot be recorded.
Operating Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using EQ/ LG EQ. You can change the EQ/ LG EQ using AD arrow key while the EQ/ LG EQ information is displayed on. 19 , Note y In some of surround modes, on some speakers, there’s no sound or low sound. it, depends on the mode of surround and the source of audio, it is not defective.
Operating Photoi Presetting the Radio Stations To Do this You can preset 50 stations for FM. View photo files as a slide show Use w/s/a/d to highlight (`) icon then press ENTER (b) to start slide show. Before tuning, make sure that you have turned down the volume. Adjust slide show speed You can change slide show speed using a/d when (J) icon is highlighted. 1. Press FUNCTION until FM appears in the display window. 2. Select the desired frequency by using TUN (-/+).
Troubleshooting 21 Troubleshooting Symptom Cause Solution The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. No disc is inserted. Insert a disc. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control is not pointed at the remote sensor on the unit.
Appendix Area Code List Choose an area code from this list.
Appendix 23 Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications General Power requirements Refer to the main label Power consumption Refer to the main label Dimensions (W x H x D) (360 x 65 x 300) mm Net Weight (Approx.) 2.5 kg Operating temperature 0 °C to 40 °C Operating humidity 5 % to 90 % System Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) DC 5V 0 500 mA Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.
Appendix 25 Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license. 6 Appendix HT156DD-F0-AMARLLK-ENG.indd 25 11. 07.
HT156DD-F0-AMARLLK-ENG.indd 26 11. 07.