HT502THW-AN_DARELLP_ENG_6954 WIRELESS DVD/CD RECEIVER SYSTEM OWNER’S MANUAL MODEL: HT502THW Main Unit - HT502THW-AN Speakers - SH52TH-F SH52TH-S SH52TH-C SH52TH-W W92-T, W92-R R Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction Maintenance and Service Before use . . . . . . . . . . . . Front Panel/Rear Panel . . Remote Control . . . . . . . . Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .4 .5 .6 Handling the unit Installation and Setup TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .7 Optional Equipment Connection . . . . . . . . . . . .8 Antenna Connection . . . . . . . . .
Introduction Before use Types of Playable Discs DVD (8 cm / 12 cm disc) To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location.
Front Panel/Rear Panel POWER Introduction DISC Tray DISPLAY Window VOLUME controller TUNING(-/+)/ SKIP ./> >) SEARCH(. STOP (x) AUDIO IN connector PAUSE (X)/ MONO/STEREO (ST.) USB port Connect to a USB port of a memory device (USB memory etc.) FUNC.(-)/PLAY(B) Press and hold down this button about 3 seconds, then press repeatedly to select other function. MIC ( ) Connect to a microphone to MIC socket.
Remote Control Z) OPEN/CLOSE (Z POWER DVD Opens and closes the disc tray. AUX Selects the output source (CD/DVD). Selects input source. BAND USB Selects the System’s tuner (FM and AM bands) 0-9 numerical buttons Selects a service, programme number directly or selects numbered options in a menu. XTS pro Supplies more natural and realistic sound. Supplies great sound effect. AUDIO Selects an audio language (DVD) or an audio channel (CD). SOUND Selects the sound mode.
Installation and Setup TV Connection Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution: Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR.
Optional Equipment Connection OPTICAL IN connection (O) Auxiliary device DVD Player (or Digital Device, etc) OUT IN VIDEO AUDIO (L) U Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector. AUDIO IN connection (D) AUDIO (R) OPTICAL Connect a output of portable device (MP3 or PMP etc) to the AUDIO input connector. OUT To AUDIO OUT (L/R) USB Memory, MP3 Player (or Memory Card Reader, etc.
HDMI Connection Rear of DVD/CD Receiver About HDMI MONITOR HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV. INPUT L - AUX - R HDMI OUT Y COMPONENT VIDEO (PROGRESSIVE SCAN) OUT PUT Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable.
Speaker System Connection Notes: Optimum performance can be implemented only when the Connect the speakers to the front (right, left) or center speaker connectors at the main set. Connect the subwoofer to the woofer connector. Connect the power cord of the Wireless Receiver to the outlet, then connect the Wireless Receiver and the rear speaker (right, left) with the speaker cable.
Setup the Wireless System Note: If there is a strong electromagnetic wave product nearby, an interference may be occurred. Put the unit (Wireless Receiver and main unit) away from there. (Ex : Micro wave oven) Rear speaker connector Power cord LED indicator Displays the operating status. LED indicator of wireless transmitter * LED indicator - “BLUE” The main set is turned on, everthing is connected and transmitting. * LED indicator - “RED” The wireless transmitter is in standby mode.
Setting an ID of Wireless Transmitter When the unit is manufactured, the ID is already set. If an interference occurs or you use a new Wireless RX, an ID is set again. 1. Connect the SOUND SIGNAL connector of transmitter and the rear (right, left) speaker terminals of main unit with the SOUND SIGNAL cable. Note: If there is no audio signal for longer than 10 minutes, the Wireless Receiver and Wireless Transmitter will be automatically switched to standby mode. At power saving mode, both LEDs will turn red.
Displaying Disc Information On - screen GENERAL OPERATION You can display various information about the disc loaded on-screen. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 2. You can select an item by pressing v / V and change or select the setting by pressing b / B. Title (Track) – Current title (or track) number/ total number of titles (or tracks).
Display TV Aspect 4:3 – Select when a standard 4:3 TV is connected. 16:9 – Select when a 16:9 wide TV is connected. Display Mode The display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.
Each DVD disc has a variety of audio output options. Set the receiver’s AUDIO options according to the type of audio system you use. Dynamic Range Control (DRC) With the DVD*1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones).
LOCK (Parental Control) OTHERS Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. 1. Select “Rating” on the LOCK menu then press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. Input a password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3. Select a rating from 1 to 8 using the v / V buttons.
Operation General features Buttons Operations Discs Z (OPEN / CLOSE) Opens or closes the disc tray. X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. ALL SKIP (. / >) ALL VCD DivX Press SKIP . twice briefly to step back to the previous chapter/track.
Notes on general features: Screen Saver Zoom may not work on some DVDs. The A-B repeat function is available only in the current title. The screen saver appears when you leave the unit in Stop mode for about five minutes. Additional features 1.5 times speed playback DVD VCD ACD MP3 WMA You can play at 1.5 times speed. The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc. 1. During playback, press PLAY(B) to play at 1.
This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media or Audio CD a menu appears on the TV screen. Press v / V to select a track/file and then press PLAY or ENTER, and playback starts. You can use variable playback functions. Refer to the page 17. ID3 TAG When playing a file containing information such as track titles, you can see the information by pressing DISPLAY.
Viewing a JPEG file JPEG This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. JPEG disc compatibility with this player is limited as follows: • Depending upon the size and the number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc’s contents.
Playing a DivX Movie file Using this DVD/CD Receiver you can play DivX disc. DivX disc compatibility with this player is limited as follows: 1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen. • Available resolution size of the DivX file is under 800x600 (W x H) pixel. • The file name of the DivX subtitle is available by 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. 3.
Presetting the Radio Stations Listening to the Radio You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. Preset radio stations in the DVD/CD Receiver’s memory first (see “Presetting radio stations” on the left). 1. Press BAND on the remote control until FM or AM (MW) appears in the display window. 1. Press BAND until FM or AM (MW) appears in the display window. 2. And then every time you press BAND, FM and AM (MW) changes alternately. 3.
Sleep Timer Setting XTS/XTS pro You can set the DVD/CD Receiver to turn off automatically at a specified time. Each time you press XTS pro the setting changes in the following order. 1. Press SLEEP to set the desired sleep time. 2. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF (No display) XTS ON → NORMAL → XTS-P ON... Note: You can check the remaining time before the DVD/CD Receiver turns off. Press SLEEP.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Correction No power. • The power cord is disconnected. • Plug the power cord securely into the wall outlet. The power is on, but the DVD/CD Receiver does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture. • The TV is not set to receive DVD signal output.
Cause Symptom Radio stations cannot • The antenna is positioned or connected poorly. be tuned in. The remote control does not work properly. The front panel display is too dim. 26 Correction • Connect the antenna securely. • Adjust the antennas and connect an external antenna if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). • Tune in the station manually.
Specifications Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Stereo mode Surround mode (* Depending on the sound mode settings and the source, there may be no sound output.) Inputs Outputs Type Impedance Frequency Response Sound Pressure Level Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight Wireless Transmitter (W92-T) Wireless Receiver (W92-R) Refer to main label. Refer to main label. 3.
P/NO : MFL41266954
