HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:41 PM Page 1 Model: HT503SH(HT503SH-A2, SH53SH-S/C/W) 5.1ch ez Set-up Unique Features Listen sound from TV, DVD and Digital Device with vivid 5.1ch mode. Go to page 14 USB Direct Recording Portable In Record music from CD to your USB device. Listen to music from your portable device (MP3, Notebook, etc).
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:41 PM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:41 PM Page 3 Welcome to your new DVD Receiver In NIGERIA Contents Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 POWER: This unit operates on a mains supply of 200-240V, 50/60Hz. WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . .5 at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA Remote control . . . . . . .
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:41 PM Page 4 Setting up Attaching the speakers to the DVD receiver a You will have received six speaker cables. Each one is colour-coded by a band near each end and connects one of the six speakers to the DVD receiver. b Connect the wires to the DVD receiver. Match each wire’s coloured band to the same coloured connection terminal on the rear of the DVD receiver.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 5 Hooking up the unit a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables. Audio In connection Video Out connection The unit’s Audio jacks are colour coded (red for right audio and white for left audio). If your TV has only one input for audio (mono), connect it to the left (white) audio jack on the unit.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 6 Remote control a POWER: Switches the unit ON or OFF. FUNCTION : Selects the function (DVD/CD, FM, AM) a b c d e 6 INPUT : Changes the input source ( AUX, AUX OPT, PORTABLE, USB) SLEEP : Sets the System to turn off automatically at a specified time. (Dimmer : Dims the LED (Light-emitting diode) of front panel by half in power-on status.) MUTE : Press MUTE to mute your unit.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 7 Main Unit Open/Close DVD/CD Disc Drawer PORT. IN port The PORT. In port means you can connect an audio device to play trough the surround sound speakers. USB port The USB port allows you can connect a memory device to your DVD player. Power Turn the unit on and off. MIC 1/MIC 2 Connect a microphone to MIC 1 or MIC 2 to both sockets.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 8 Adjust the settings OSD Initial language settings Before using the unit for the first time, you have to adjust OSD initial language ON REMOTE 1 Turn the power on: Appear the language list display window POWER 2 Select the language: vV b B 3 Press: ENTER 4 To confirm press: b B and ENTER ON REMOTE 1 Display setup menu : SETUP 2 Select a desired option on the first level: vV 3 Move to second level: B 4 Select a desired option on the secon
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 9 Adjust the display settings Adjust the audio settings TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. 5.1 Speaker Setup - Adjust 5.1 Speaker Setup menu for amplifier’s output. [Speaker]: Select a speaker that you want to adjust. [Size]: Since the speaker settings are fixed, you cannot change the settings.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 10 Adjust the lock settings To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers. If you forget your password you can reset it. Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER. The password has now been cleared.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 11 Displaying Disc Information Playing a Disc or file ON REMOTE ON REMOTE 1 Press DISPLAY: DISPLAY 1 Open the disc tray: (On unit: Z) 2 Select a item: vV 2 Insert a Disc: (On unit) 3 Adjust the Display menu settings: bB 3 Close the disc tray: (On unit: Z) - 4 To return the exit: DISPLAY 4 Adjust the menu settings: or Select a file from the menu: vV b B 5 Start the Disc playing: B PLAY 6 To stop the Disc playing: x STOP Displaying D
HT503SH_A2_BARELLK_ENG_6512 Fast forward or fast reverse 6/27/08 11:42 PM Page 12 Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG ALL Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 Creating your own program ACD MP3 11:42 PM Page 13 WMA Viewing photo files You can play the contents of a disc in the order you want by arranging the order of the music files on the disc. The program is cleared when the disc is removed. Select a desired music file then press PROG./MEMO. or select “ “ and then press ENTER to add the music file to the program list. To add all music files on the disc, select “ ” and then press ENTER.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 14 5.1ch ez Set-up Listening to the radio Be sure that both FM and AM aerials are connected. ON REMOTE 1 Turn the power on: POWER 2 Select either FM or AM: FUNCTION 3 Select a radio station: TUN-/+ 4 To ‘save’ a radio station: A preset number will show in the display. PROG/MEMO. 5 To select a ‘saved’ station input the preset number: Up to 50 radio stations can be saved. PRESET-/+ 6 To confirm press: PROG/MEMO.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 15 Listening to music from your USB device more you can do Listening to music from your USB device The advantage of connecting your portable USB player through the system’s USB port is that the USB device can be controlled from the system. Compatible USB Devices • Devices which require additional program installation when you have connected it to a computer, are not supported. • MP3 Player : Flash type MP3 player.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 16 Recording music from CD to your USB device ON REMOTE 1 Connect the USB device to the unit: - 2 Select a mode (DVD/CD) in which you want to record: FUNCTION 3 Start the recording: If you want to record desired music file in Disc to USB.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 17 Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 18 Troubleshooting PROBLEM CAUSE CORRECTION No power No picture The power cord is disconnected. The TV is not set to receive the DVD signal. Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the DVD Receiver appears on the TV screen. Connect the video cables securely to both the TV and DVD Receiver.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 19 Types of Playable Discs Type About the Logo DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: Video mode and finalized only DVD VR format that have been finalized can not be played in this unit DVD+R: Video mode only Supports the double layer disc also DVD+RW: Video mode only Audio CD: This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3,WMA and/or JPEG files.
HT503SH_A2_BARELLK_ENG_6512 6/27/08 11:42 PM Page 20 Specifications General Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Temperature Operating humidity Laser Refer to main label. Refer to main label. 3.9 kg 430 x 73 x 305 mm 5°C to 35°C, Operation status: Horizontal 5% to 85% Semiconductor laser, wavelength 650 nm Tuner FM/AM [MW] FM Tuning Range FM Intermediate Frequency AM Tuning Range AM Intermediate Frequency 87.5 - 108.0 MHz or 65.0 - 74.
