OWNER’S MANUAL DVD Receiver System Please read this manual carefully before operating your set and retain it for future reference. MODEL HT805PM (HT805PM, SH85PM-F/ S/ C/ W) P/NO : MFL64940303 HT805PM-F2_DCHNLLK_ENG_0303.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information This device is equipped with a portable battery or accumulator. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Safe way to remove the battery or the battery from the equipment: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating.
Contents Contents 19 AUX In Connection 19 AUDIO (PORT.
Contents Maintenance 30 Changing subtitle code page 31 Viewing a PHOTO file 31 Options while viewing a photo 36 Notes on Discs 32 Sleep Timer Setting 36 Handling the Unit 32 Dimmer 32 Turn off the sound temporarily 32 Last Scene Memory 32 System Select - Optional 32 Adjust the speaker level settings 32 33 VOCAL FADER Radio Operations 1 Troubleshooting 38 2 Troubleshooting Appendix 38 Language Codes 39 Area Codes 3 33 Presetting the Radio Stations 33 Deleting all the sav
Preparation 2 Preparation 2 Preparation Unique Features Accessories Portable In Please check and identify the supplied accessories. Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) FM antenna (1) Video cable (1) Full HD up-scaling Views Full HD picture quality with simple setup. Home Theater Speaker ez Setup listens sound from TV, DVD and Digital device with vivid 5.1 (2.1 or 2.
Preparation Playable Discs This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CDRW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented.
Preparation Playable file Requirement DivX file compatibility with this unit is limited as follows : • Available resolution: within 720 x 576 (W x H) pixels. • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • Frame rate : less than 30 fps. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted.
Preparation Remote control Remote control SLEEP (睡眠) : Sets the System to turn off automatically at a specified time. (Dimmer : The display window will be darken by half.) INFO/DISPLAY (快捷菜单) : Accesses OnScreen Display. b HOME (主菜单): Displays the [Home] menu. DISC MENU (光碟菜单) : Accesses the menu on a DVD disc. • • • • • • • • • • b • • • • • • • • • U/u/I/i (up/ down/ left/ right): Used to navigate on-screen displays. PRESET (预设) (+/-) : Selects programme of Radio.
Preparation Remote control MUTE (静音) : Mutes the sound. • • • • • • • • • • e • • • • • • • • • 0-9 numerical buttons : Selects numbered options in a menu. a 2 Preparation b CLEAR (清除) : Removes a number when setting the password. s REPEAT (重复) : Selects a play mode. (Repeat/ Random) • • • • • • • • • • f • • • • • • • • • TV Control buttons : Controls the TV. (LG TV only) z REC (录音) : USB Direct Recording. c : This button is not available.
Preparation 11 Front panel b c d 2 Preparation a l k j ih g f e a 1/\ (POWER) Switches the unit ON or OFF. g x (STOP) Stops playback. b Disc Tray h N/X (PLAY / PAUSE) Starts playback. Pauses playback temporarily, press again to exit pause mode. c Display window Shows the current status of the unit. d VOLUME (音量钮) Adjusts speaker volume. e F (FUNCTION) Changes the input source or function. f ./> (SKIP) Goes to next or previous file/track/chapter.
Preparation Rear panel a b c d e 2 Preparation ihg a Power cord b Speakers connectors Connects the speaker cables. c Cooling Fan d Antenna Connector FM- Connects the FM wired antenna e VIDEO OUT Connects to a TV with video inputs. HT805PM-F2_DCHNLLK_ENG_0303.indd12 12 f f HDMI OUT (type A) Connects to TV with HDMI inputs. (Interface for digital audio and video) g OPTICAL IN Connects to optical audio equipment.
Installation 13 3 Installation 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Installation Positioning the system 3 A Front left speaker (L)/ B Front right speaker (R): Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes.
Installation Connections to Your TV Component Video Connection Make one of the following connections, depending on the capabilities of your existing equipment. You can hear the sound through the system’s speakers. 15 Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables. Component Connection NOTE • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit.
Installation HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). HDMI Connection NOTE • If a connected HDMI device does not accept the audio output of the unit, the HDMI device ’s audio sound may be distorted or may not output.
Installation 17 Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Video Connection Unit Installation 3 TV Yellow HT805PM-F2_DCHNLLK_ENG_0303.
Installation Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME (主菜单). 2. Use I/i to select the [Setup] and press ENTER (确定). The [Setup] menu appears. Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type.
Installation Optional Equipment Connection 19 AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. PORT.IN Connection AUX In Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. AUX In Connection Unit MP3 player, etc... Installation 3 Listening to music from your portable player or external device The unit can be used to play the music from many types of portable player or external devices.
Installation USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that support USB2.0 or USB1.1. • The USB function of this unit does not support some USB devices. USB Connection USB device requirement • Devices which require additional program installation connected to a computer, are not supported.
Installation OPTICAL In connection 21 Antenna Connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. OPTICAL IN Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. Antenna Connection Installation 3 To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch mode.
Installation Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 22 to 26. 3 Installation OSD Initial language settings During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit.
Installation Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. [Other] To select another language, press numeric buttons and then ENTER (确定) to enter the corresponding 4-digit number according to the language code list on the page 38.
Installation Audio 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 1. Select [5.1 Speaker Setup] on the [Audio] menu. 2. Press ENTER (确定). The [5.1 SPEAKER] appears. 3 Installation 3. Use I i to select the desired speaker. 4. Adjust options using U u I i buttons. 5. Returns to the previous menu by pressing O RETURN (返回). [Speaker selection] Select a speaker that you want to adjust.
Installation Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use U u (on the remote control) to scroll up and down through the delay amount, which you can set at anything between 0 and 300m sec. Semi Karaoke When a chapter/ title/ track is fully finished, this function shows the score in the screen with a fanfare sound.
Installation Password You can enter or change password. 1. Select [Password] on the [Lock] menu and then press i. 2. Press ENTER (确定). 3. Input a password and press ENTER (确定). 3 To change the password, press ENTER (确定) when the [Change] option is highlighted. Input a password and press ENTER (确定). Enter it again and press ENTER (确定) to verify. Installation 4. Press HOME (主菜单) to exit the menu.
Operation 27 4 Operation Using the Home Menu Basic Operations 1. Press HOME (主菜单). Displays the [Home] menu. 1. Insert the disc by using the Z OPEN/CLOSE (开/关仓) or Connect the USB device to the USB port. 2. Press HOME (主菜单). Displays the [Home] Menu. 3. Press ENTER (确定) then selected option menu. 3. Select an option by using I i. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows. Select a media then press ENTER (确定).
Operation To Stop 4 Do this Press x STOP (停止) Playback Press B PLAY, MONO/ STEREO (播放, 单声道/立 体声). Pause Press X PAUSE/STEP (暂停 /步距). Frameby-Frame playback Press X PAUSE/STEP (暂停 /步距repeatedly to play title Frame-by-Frame. (DVD, DivX only) Operation During playback, press ./> SKIP (跳跃) to go to the next chapter/ Skipping to track/ file or to return to the the next/ beginning of the current previous chapter/ track/ file. chapter/ track/ Press .
Operation DVD When you play a DVD which contains several menu, you can select the menu you want using the Menu. Starting play from selected time DVD DivX To start playing at any chosen time on the file or title. 1. Press DISC MENU (光碟菜单). The disc’s menu appears. 1. Press INFO/DISPLAY (快捷菜单) during playback. 2. Select the menu by using U u I i. 2. Press U u to select the time clock icon and “--:--:--” appears. 3. Press B PLAY, MONO/STEREO (播放, 单 声道/立体声) to confirm.
Operation Marked Playback ACD MP3 NOTE WMA The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home] menu. Music menu Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) If you want to select all files on the list, select [Select All] and press ENTER (确定). To delete a Marker 1.
Operation Viewing a PHOTO file JPG About help menu in the full screen. This unit can play discs with photo files. Menu 1. Select [Photo] on the [Home] menu and press ENTER (确定). Menu Photo menu Moving to the previous or next file list. 31 Buttons Operation INFO/ Displaying the DISPLAY Option menu. (快捷菜单) b/B Prev./ Next I/i Moving to another file O Close O RETURN (返回) Returning to the [Photo] menu.
Operation Sleep Timer Setting System Select - Optional Press SLEEP (睡眠) one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. You must select the appropriate system mode for your TV system. Press and hold X PAUSE/ STEP (暂停/步距) for more than five seconds to be able to select a system in the [Home] menu. (PAL/ NTSC) To check the remaining time, press SLEEP (睡 眠).
Operation Radio Operations 33 Presetting the Radio Stations You can preset 50 stations for FM. Listening to the radio 1. Press t RADIO&INPUT (输入) until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (调谐) (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. or Before tuning, make sure that you have turned down the volume. 1.
Operation Sound adjustment On Display Description MP3 OPT This function is optimized for compressible MP3, WMA file. It improves the treble sound. Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT (音效). You can change the SOUND EFFECT (音效) using I i arrow key while the sound effect information is displayed on. The displayed items for the equalizer maybe different depending on sound sources and effects.
Operation Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. 1. Connect the USB device to the unit. 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing z REC (录音). 4. To stop recording, press xSTOP (停止). [All tracks/ files recording] Record to USB in stop or play mode. [Program list recording] After marking desired file(s) and you can record it to USB (Refer to the page 30).
Maintenance 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Never stick paper or tape on the disc. Keeping the exterior surfaces clean • Do not use volatile liquids such as insecticide spray near the unit. • Wiping with strong pressure may damage the surface.
Troubleshooting 37 6 Troubleshooting PROBLEM CAUSE CORRECTION Plug the power cord into the wall outlet No power The power cord is disconnected. securely. Select the appropriate video input mode The TV is not set to receive the DVD signal. on the TV so the picture from the unit appears on the TV screen. No picture The video cables are not connected Connect the video cables securely to both securely. the TV and unit.
Appendix 7 Appendix Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Appendix 39 Area Codes Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Maldives Mexico Monaco Mongolia Moro
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
Appendix Specifications Amplifier General • Surround mode: Front 136 W + 136 W (4 Ω at 1 kHz) Center 136 W (4 Ω at 1 kHz) Surround 136 W + 136 W (4 Ω at 1 kHz) Subwoofer 170 W (3 Ω at 60 Hz) • Power consumption: Refer to main label • Dimensions (W x H x D): 360 x 62.5 x 312.3 mm without foot • Net Weight (Approx.): 2.8 kg • Operating temperature: 41 °F to 95 °F (5 °C to 35 °C) • Operating humidity: 5 % to 90 % • Bus Power supply (USB): DC 5 V 500 mA Inputs/ Outputs • VIDEO OUT: 1.
HT805PM-F2_DCHNLLK_ENG_0303.
