Owner's Manual

33Operation
Operation
4
Radio Operations
Be sure that both FM aerials are connected.
(Refer to the page 21.)
Listening to the radio
1. Press
t
RADIO&INPUT (
输入
) until FM
appears in the display window.
The last received station is tuned in.
2. Press and hold TUNING (
调谐
) (-/+) for
about two seconds until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a
station.
or
Press
TUNING (
调谐
) (-/+) repeatedly.
3. Adjust the volume by rotating VOLUME (
音量钮
) on the front panel or by pressing
VOL (
音量
) (+/- )on the remote control
repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
t
RADIO&INPUT (
输入
) until FM
appears in the display window.
2. Select the desired frequency by using
TUNING (
调谐
) (-/+)
3. Press

ENTER (
确定
) a preset number will
ash in the display window.
4. Press PRESET (
预设
) (-/+) to select the
preset number you want.
5. Press

ENTER (
确定
).
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
Deleting all the saved stations
1. Press and hold CLEAR (
清除
) for two
seconds.
"ERASE ALL" will ash up on the unit display.
2. Press CLEAR (
清除
) to erase all saved of the
radio stations.
Deleting a saved station
1. Press PRESET (
预设
) - / + to Select a preset
number you want to delete.
2. Press CLEAR (
清除
) , the preset number will
blink in the display window.
3. Press CLEAR (
清除
) again, to delete the
selectd preset number.
Improving poor FM reception
Press
B
PLAY, MONO/STEREO (
播放
,
单声
道/立体声
) on the remote control. This will
change the tuner from stereo to mono and
usually improve the reception.
HT805PM-F2_DCHNLLK_ENG_0303.indd33 33 2010-04-21 ¿ÀÈÄ 4:59:31