HT902TB-A0.JA2ALLA_ENG_MFL3764031 DVD RECEIVER OWNER’S MANUAL MODEL: HT902TB Main Unit - HT902TB Speakers - SH92TB-S SH92TB-C SH92TB-W R USB Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction Maintenance and Service Before use . . . . . . . . . . . . Front Panel/Rear Panel . . Remote Control . . . . . . . . Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .4 .5 .6 Refer to the information in this chapter before contacting a service technician. Handling the unit Installation and Setup TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Before use Types of Playable Discs DVD (8 cm / 12 cm disc) To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location.
Front Panel/Rear Panel POWER Introduction DISC Tray DISPLAY Window VOLUME controller TUNING(-/+)/SKIP/ ./> >) SEARCH(. STOP (x) AUDIO IN connector PAUSE (X)/ MONO/STEREO (ST.) USB port Connect to a USB port of a memory device (USB memory etc.) FUNC.(-)/PLAY(B) Press and hold down this button about 3 seconds, then press repeatedly to select other function.
Remote Control POWER TUNER Selects the System’s tuner (FM and AM bands). AUX Selects input source. TUNER Selects the output source (CD/DVD). AUX DVD USB PROG./MEMO. USB Plays the multimedia files. OPEN/CLOSE POWER DIMMER SOUND S-TITLE CLEAR REPEAT A-B MARKER SEARCH AUDIO REPEAT + SCAN + PLAY PAUSE/STEP SKIP REPEAT STOP TITLE ZOOM DISPLAY SETUP MENU RETURN Displays MARKER SEARCH menu. Searches backward or forward. Reverse/ Forward slow playback. ENTER Repeats sequence.
Installation and Setup TV Connection Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution: Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR.
Optional Equipment Connection OPTICAL IN connection (O) Auxiliary device DVD Player (or Digital Device, etc) OUT IN VIDEO AUDIO (L) U Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector. AUDIO IN connection (D) AUDIO (R) OPTICAL Connect a output of portable device (MP3 or PMP etc) to the AUDIO input connector. OUT To AUDIO OUT (L/R) USB Memory, MP3 Player (or Memory Card Reader, etc.
The front and rear speakers are detached from the speaker stands. Connect the speaker cords and assemble the front and rear speakers from speaker stands as illustrated. Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Front speaker (Left) Front speaker (Right) 1. Connect the speaker cords to the appropriate terminals on the bottom of each front and rear speaker. 2.
HDMI Connection Rear of DVD/CD Receiver About HDMI MONITOR HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV. HDMI OUT Y COMPONENT VIDEO (PROGRESSIVE SCAN) OUT PUT Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable.
Displaying Disc Information On - screen GENERAL OPERATION You can display various information about the disc loaded on-screen. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 2. You can select an item by pressing v / V and change or select the setting by pressing b / B. Title (Track) – Current title (or track) number/ total number of titles (or tracks).
DISPLAY DISPLAY TV Aspect 16 : 9 Display Mode Widescreen Progressive Scan Off Move Select TV Aspect 4:3 – Select when a standard 4:3 TV is connected. 16:9 – Select when a 16:9 wide TV is connected. Display Mode The display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.
AUDIO 5.1 Speaker Setup Each DVD disc has a variety of audio output options. Set the receiver’s AUDIO options according to the type of audio system you use. AUDIO Select DRC On Vocal On HD AV Sync 0 ms 1. Press ENTER, and the 5.1 Speaker Setup menu appears.
LOCK (Parental Control) OTHERS LOCK DISPLAY Rating Unlock TV Aspect 16 : 9 Password **** Display Mode Widescreen Area Code US AU Move Select Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. 1. Select “Rating” on the LOCK menu then press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. Input a password and press ENTER. Enter it again and press ENTER to verify.
Operation General features Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray. X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. ALL SKIP (. / >) Discs ALL VCD DivX Press SKIP . twice briefly to step back to the previous chapter/track.
Notes on general features: Screen Saver Zoom may not work on some DVDs. The A-B repeat function is available only in the current title. The screen saver appears when you leave the unit in Stop mode for about five minutes. Additional features 1.5 times speed playback DVD VCD ACD MP3 WMA You can play at 1.5 times speed. The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc. 1. During playback, press PLAY(B) to play at 1.
This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media or Audio CD a menu appears on the TV screen. Press v / V to select a track/file and then press PLAY or ENTER, and playback starts. You can use variable playback functions. Refer to the page 15. ID3 TAG When playing a file containing information such as track titles, you can see the information by pressing DISPLAY.
Viewing a JPEG file JPEG This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. PHOTO List Preview JPEG Folder 1 JPEG disc compatibility with this player is limited as follows: • Depending upon the size and the number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc’s contents.
Playing a DivX Movie file Using this DVD/CD Receiver you can play DivX disc. DivX disc compatibility with this player is limited as follows: 1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen. • Available resolution size of the DivX file is under 800x600 (W x H) pixel. MOVIE 0:00:00 • The file name of the DivX subtitle is available by 45 characters.
DVD Audio Discs DVD Audio is a new disc format building on the success of DVD to provide high quality, uncompressed, multi-channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio can provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD).
Presetting the Radio Stations Listening to the Radio You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. Preset radio stations in the DVD/CD Receiver’s memory first (see “Presetting radio stations” on the left). 1. Press TUNER on the remote control until FM or AM (MW) appears in the display window. 1. Press TUNER until FM or AM (MW) appears in the display window. 3. Press and hold TUN.
Sleep Timer Setting XTS/XTS pro You can set the DVD/CD Receiver to turn off automatically at a specified time. Each time you press XTS pro the setting changes in the following order. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and the sleep time appears in the display window. 2. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF (No display) XTS ON → NORMAL → XTS-P ON...
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause No power. • The power cord is disconnected. The power is on, but the DVD/CD Receiver does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture. • The TV is not set to receive DVD signal output.
The remote control does not work properly. The front panel display is too dim. Correction • Connect the antenna securely. • Adjust the antennas and connect an external antenna if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). • Tune in the station manually. • No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). • Preset the stations (page 21).
Specifications Speakers Amplifier AM [MW] Tuner FM Video CD/DVD General Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity Laser Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input Video output COMPONENT VIDEO OUT Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Stereo mode Surround mode (* Dep
P/NO : MFL37641031
