Model: HT903TA(HT903TA-A2, SH93TA-S/C/W) Full HD up-scaling (1080p) Unique Features 5.1ch ez Set-up View Full HD picture quality with simple setup. Listen sound from TV, DVD and Digital Device with vivid 5.1ch mode. Go to page 10 Go to page 15 USB Direct Recording Portable In Record music from CD to your USB device. Listen to music from your portable device (MP3, Notebook, etc).
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Welcome to your new DVD Receiver Contents Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 OSD Initial language settings . . . . . . . . . . . . . . . . . . .9 Initial Setting the Area Code . . . . . . . . . . . . . . . . . . . .9 Adjust the settings . . .
Setting up The speakers are detached from the speaker stands. Connect the red end of each wire to the terminals marked +(plus) and the black end to the terminals marked - (minus). c Connect the wires to the speakers. Connect the other end of each wire to the correct speaker according to the colour coding: Assembling the Speakers 1 Draw the speaker cord through the hole on the speaker. COLOUR SPEAKER POSITION Grey Rear Behind you and to your right. Blue Rear Behind you and to your left.
Hooking up the unit a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables. Audio In connection Video Out connection Connect the VIDEO OUTPUT(MONITOR) jack on the unit to thecorresponding input jack on your TV using a Video cable. The unit’s Audio jacks are colour coded (red for right audio and white for left audio). If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit.
Hooking up the unit Hooking up the unit - more you can do HDMI Out connection Connect the HDMI OUTPUT jack on the unit to the HDMI input jack on a HDMI compatible TV using a HDMI cable. Resolution Setting You can change the resolution for component video and HDMI output. To change the resolution using setup menu to select the desired resolution - Auto, 480i(576i), 480p(576p), 720p, 1080i, 1080p.
Remote control a b c d a INPUT : Changes the input source ( AUX, AUX OPT, PORTABLE, USB) SLEEP : Sets the System to turn off automatically at a specified time. (Dimmer : Dims the LED (Light-emitting diode) of front panel by half in power-on status.) POWER: Switches the unit ON or OFF. FUNCTION : Selects the function (DVD/CD, FM, AM) TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear.
Main Unit Open/Close DVD/CD Disc Drawer PORT. IN port The PORT. In port means you can connect an audio device to play trough the surround sound speakers. USB port The USB port allows you can connect a memory device to your DVD player. Power Turn the unit on and off. MIC 1/MIC 2 Connect a microphone to MIC 1 or MIC 2 to both sockets. 8 Play/Pause, Function Press and hold down this button for about 3 seconds then press repeatedly to select other function.
Adjust the settings OSD Initial language settings Before using the unit for the first time, you have to adjust OSD initial language ON REMOTE 1 Turn the power on: Appear the language list display window POWER 2 Select the language: vV b B 3 Press: ENTER 4 To confirm press: b B and ENTER ON REMOTE 1 Display setup menu : SETUP 2 Select a desired option on the first level: vV 3 Move to second level: B 4 Select a desired option on the second level: vV 5 Move to third level: B 6 Change the se
Adjust the display settings TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode – If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen.
HT503PH-AM_BSGPLLK_ENG_1171 6/24/08 10:03 PM Page 11 Adjust the lock settings To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers. If you forget your password you can reset it. Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER. The password has now been cleared.
HT903TA_A2_DNGAFLK_ENG_6501 6/23/08 2:12 PM Page 12 Displaying Disc Information Playing a Disc or file ON REMOTE ON REMOTE 1 Press DISPLAY: DISPLAY 1 Open the disc tray: (On unit: Z) 2 Select a item: vV 2 Insert a Disc: (On unit) 3 Adjust the Display menu settings: bB 3 Close the disc tray: (On unit: Z) - 4 To return the exit: DISPLAY 4 Adjust the menu settings: or Select a file from the menu: vV b B 5 Start the Disc playing: B PLAY 6 To stop the Disc playing: x STOP Displaying Di
HT903TA_A2_DNGAFLK_ENG_6501 Fast forward or fast reverse 6/23/08 2:12 PM Page 13 Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG ALL Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed.
Creating your own program ACD MP3 WMA Viewing photo files You can play the contents of a disc in the order you want by arranging the order of the music files on the disc. The program is cleared when the disc is removed. Select a desired music file then press PROG./MEMO. or select “ “ and then press ENTER to add the music file to the program list. To add all music files on the disc, select “ ” and then press ENTER. Select a music file from the program list then press ENTER to start programmed playback.
5.1ch ez Set-up Listening to the radio Be sure that both FM and AM aerials are connected. ON REMOTE 1 Turn the power on: POWER 2 Select either FM or AM: FUNCTION 3 Select a radio station: TUN-/+ 4 To ‘save’ a radio station: A preset number will show in the display. PROG/MEMO. 5 To select a ‘saved’ station input the preset number: Up to 50 radio stations can be saved. PRESET v/V 6 To confirm press: PROG/MEMO. Listen to sound from TV, DVD and Digital Device with vivid 5.1ch mode.
Listening to music from your USB device more you can do Listening to music from your USB device The advantage of connecting your portable USB player through the system’s USB port is that the USB device can be controlled from the system. Compatible USB Devices • Devices which require additional program installation when you have connected it to a computer, are not supported. • MP3 Player : Flash type MP3 player. The MP3 player requiring installation of a driver is not supported.
Recording music from CD to your USB device ON REMOTE 1 Connect the USB device to the unit: - 2 Select a mode (DVD/CD) in which you want to record: FUNCTION 3 Start the recording: If you want to record desired music file in Disc to USB. Select a file after start the recording: z 4 To stop a recording: x v V and z STOP Recording music from CD to your USB device - more you can do Record Audio CD source to USB • If the USB can not record appears “NO USB”.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting PROBLEM No power No picture CAUSE CORRECTION The power cord is disconnected. The TV is not set to receive the DVD signal. Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the DVD Receiver appears on the TV screen. Connect the video cables securely to both the TV and DVD Receiver. Select the correct input mode of the audio receiver so you can hear the sound from the DVD receiver.
HT903TA_A2_DNGAFLK_ENG_6501 6/23/08 2:12 PM Page 20 Types of Playable Discs Type About the Logo DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: Video mode and finalized only DVD VR format that have been finalized can not be played in this unit DVD+R: Video mode only Supports the double layer disc also DVD+RW: Video mode only Audio CD: This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3,WMA and/or JPEG files.
Specifications General Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Temperature Operating humidity Laser Refer to main label. Refer to main label. 3.9 kg 430 x 73 x 305 mm 5°C to 35°C, Operation status: Horizontal 5% to 85% Semiconductor laser, wavelength 650 nm Tuner FM/AM [MW] FM Tuning Range FM Intermediate Frequency AM Tuning Range AM Intermediate Frequency 87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz 10.