Owner's Manual

To fix the power cable of wireless speakers

To fix the power cable of wireless speakers, insert the power cable of

wireless speakers in to the hole on the speakers.

Be careful of the following

• Be careful to make sure children do not put their hands or any objects into

the *speaker duct.

*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).

• Set the distance between this unit and Wireless Speakers within 10m.

• Optimum performance can be implemented only when the Wireless

Transmitter and the Wireless Speakers within distance of 2m to 10m is used

since communication failure may occur if longer distance is used.

• Be sure to match the speaker cable to the appropriate terminal on the com-

ponents: + to + and – to –. If the cables are reversed, the sound will be dis-

torted and will lack bass.

•

It takes a few seconds (and may take longer) for the

Wireless Transmitter

and

Wireless Speakers

to communicate with each other.

• When the unit is turned off, the Wireless Transmitter is in standby mode (off)

automatically after about 10 seconds.

• If the Wireless Transmitter is turned off, the Wireless Speakers will not func-

tion.

• Do not fix the speaker cables in the hole on the speakers

HT903WA-DP_DDEULL_ENG_1130 6/27/08 10:10 PM Page 6