OWNER’S MANUAL DVD Receiver System Please read this manual carefully before operating your set and retain it for future reference. MODEL HT905TA (HT905TA, SH95TA-F/ S/ C/ W) P/NO : MFL63726946 HT905TA-F2_BPHLLL_ENG_6946.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Contents Contents 1 Safety Information 2 2 4 6 20 Optional Equipment Connection 20 AUX In Connection 20 AUDIO (PORT.
Contents Appendix 30 Resume playback 31 Marked Playback 31 Changing subtitle code page 39 Language Codes 32 Viewing a PHOTO file 40 Area Codes 41 Trademarks and Licenses 42 Specifications 32 Options while viewing a photo 33 Sleep Timer Setting 33 Dimmer 33 Turn off the sound temporarily 33 Last Scene Memory 33 System Select - Optional 33 Adjust the speaker level settings 33 34 2 3 Radio Operations Presetting the Radio Stations 34 Deleting all the saved stations 34 Dele
Preparation 2 Preparation 2 Preparation Unique Features Accessories Portable In Please check and identify the supplied accessories. Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Video cable (1) Batteries (2) Remote control (1) Speaker cables (6) FM antenna (1) HDMI cables (1) Full HD up-scaling Views Full HD picture quality with simple setup.
Preparation Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. Symbol Used in this Manual All discs and file listed below ALL MP3 files MP3 DVD and finalized DVD±R/RW DVD WMA files WMA DivX files DivX Audio CDs ACD JPG files JPG NOTE Indicates special notes and operating features.
Preparation Playable file Requirement DivX file compatibility with this unit is limited as follows : • Available resolution: within 720x576 (W x H) pixels. • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • Frame rate : less than 30 fps. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted.
Preparation Remote control t RADIO&INPUT: Changes input sources. • • • • • • • • • • b • • • • • • • • • 0 to 9 numerical buttons : Selects numbered options in a menu. Remote control OPEN / CLOSE a RADIO & INPUT REPEAT SKIP c ./> SKIP : Goes to next or previous chapter/ track/ file. SCAN m/M SCAN : Searchs backward or forward. SKIP x (STOP) : Stops playback or recording. MONO/STEREO SPEAKER LEVEL d B (PLAY), MONO/STEREO : Starts playback. Selects Mono/ Stereo.
Preparation TUNING -/+ : Tunes in the desired radio station. Remote control OPEN / CLOSE a RADIO & INPUT O RETURN : Moves backwards in the menu or exits the setup menu. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear. b 2 CLEAR REPEAT Preparation SKIP c SCAN DISC MENU : Accesses the menu on a DVD disc. • • • • • • • • • • f • • • • • • • • • SKIP MONO/STEREO ECHO VOL.
Preparation 11 Front panel a b c 2 k j ihg f e d a 1/\ (POWER) Switches the unit ON or OFF. g x (STOP) Stops playback. b Disc Tray h N/X (PLAY / PAUSE) Starts playback. Pause playback temporarily, press again to exit pause mode. c Display window Shows the current status of the unit. d VOLUME Adjusts speaker volume. e F (FUNCTION) Changes the input source or function. f ./> (SKIP) Go to next or previous file/track/chapter.
Preparation Rear panel a b c de 2 Preparation ih a Power cord b Speakers connectors Connect the speaker cables. c Cooling Fan d Antenna Connector FM- Connects the FM wired antenna e VIDEO OUT Connect to a TV with video inputs. HT905TA-F2_BPHLLL_ENG_6946.indd 12 g f f HDMI OUT (Version 1.2A) Connect to TV with HDMI inputs. (Interface for digital audio and video) g OPTICAL IN Connect to optical audio equipment.
Installation 13 3 Installation Assembling the speaker stand to the speaker Attach the speakers to the speaker stands by rotateing the screws. 3 Installation Before connecting the speakers, assemble the speakers. Please check the items for assembling the speakers. Pakage contents Speaker Stand HT905TA-F2_BPHLLL_ENG_6946.
Installation Attaching the speakers to the unit 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Installation Positioning the system A Front left speaker (L)/ B Front right speaker (R): Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes.
Installation Connections to Your TV Component Video Connection Make one of the following connections, depending on the capabilities of your existing equipment. You can hear the sound through the system’s speakers. Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables.
Installation HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). HDMI Connection 17 NOTE • If a connected HDMI device does not accept the audio output of the unit, the HDMI device ’s audio sound may be distorted or may not output.
Installation Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Video Connection Unit 3 Installation TV Yellow HT905TA-F2_BPHLLL_ENG_6946.
Installation Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME. 2. Use I/i to select the [Setup] and press ENTER. The [Setup] menu appears. 19 Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type.
Installation Optional Equipment Connection AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. PORT.IN Connection AUX In Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. AUX In Connection 3 MP3 player, etc... Installation Unit Listening to music from your portable player or external device The unit can be used to play the music from many types of portable player or external devices.
Installation USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 21 Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that support USB2.0 or USB1.1. • The USB function of this unit does not support some USB devices. USB Connection USB device requirement Devices which require additional program installation connected to a computer, are not supported.
Installation OPTICAL In connection Antenna Connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. OPTICAL IN Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. Antenna Connection 3 Installation To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch mode.
Installation Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 23 to 27. During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language. 1.
Installation Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. 3 [Original] Refers to the original language in which the disc was recorded. Installation [Other] To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 39.
Installation Audio 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 1. Select [5.1 Speaker Setup] on the [Audio] menu. 2. Press ENTER. The [5.1 Speaker setup] appears. [Speaker selection] Select a speaker that you want to adjust. NOTE Certain speaker settings are prohibited by the Dolby Digital licensing agreement. [Size] Since the speaker settings are fixed, you cannot change the settings.
Installation Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. HD AV Sync 3 Installation Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync.
Installation Password You can enter or change password. 1. Select [Password] on the [Lock] menu and then press i. 2. Press ENTER 3. Input a password and press ENTER. To change the password, press ENTER when the [Change] option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 4. Press HOME to exit the menu. If you forget your password, you can clear it using the following steps: 1. Select the [Setup] menu on the [Home] menu.
Operation 4 Operation Using the Home Menu Basic Operations 1. Press HOME. Displays the [Home] menu. 1. Insert the disc by using the Z OPEN/ CLOSE or Connect the USB device to the USB port. 2. Press HOME. Displays the [Home] Menu. 4 Operation 2. Select an option by using I i. 3. Press ENTER then selected option menu. [Music] – Displays [MUSIC] menu. 3. Select an option by using I i. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows.
Operation To Stop Do this Press B (PLAY), MONO/ STEREO. Pause Press X (PAUSE/STEP). Press X (PAUSE/STEP) repeatedly to play title Frame-by-Frame. (DVD, DivX only) During playback, press Locating a m/M SCAN repeatedly point quickly to select the required scan by playing speed. a file in fast To return to normal speed, forward or fast press B (PLAY), MONO/ reverse STEREO. Press s REPEAT repeatedly, and the current title, chapter or track will be played back repeatedly or randomly.
Operation To display the DVD Menu DVD When you play a DVD which contains several menu, you can select the menu you want using the Menu. 1. Press DISC MENU. The disc’s menu appears. DVD When you play a DVD which contains several title, you can select the title you want using the Menu. 1. Press TITLE. The disc’s title appears. Operation 2. Select the menu by pressing U u I i. 3. Press B (PLAY), MONO/STEREO to confirm. 1.5 times speed playback 3.
Operation Marked Playback ACD MP3 NOTE WMA The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home] menu. Music menu Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) If you want to select all files on the list, select [Select All] and press ENTER. To delete a Marker 1.
Operation Viewing a PHOTO file JPG About help menu in the full screen. This unit can play discs with photo files. Menu 1. Select [Photo] on the [Home] menu and press ENTER. Menu Photo menu Moving to the previous or next file list. Buttons INFO/ DISPLAY Operation Displaying the Option menu. b/B Prev./ Next I/i Moving to another file O Close O RETURN Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 4 1.
Operation Sleep Timer Setting System Select - Optional Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. You must select the appropriate system mode for your TV system. Press and hold X (PAUSE/ STEP) for more than five seconds to be able to select a system in the [Home] menu. (PAL/ NTSC) To check the remaining time, press SLEEP.
Operation Radio Operations Presetting the Radio Stations You can preset 50 stations for FM. Be sure that both FM aerial is connected. (Refer to the page 22) Listening to the radio 1. Press t RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 4 Before tuning, make sure that you have turned down the volume. 1. Press t RADIO&INPUT until FM appears in the display window. 2. Select the desired frequency by using TUNING (-/+) 3.
Operation Sound adjustment Setting the surround mode On Display Description CLRVOICE This program make voice sound clear, improving the quality of voice sound. (We encourage to use this EQ when you watch the movie of 5.1 channel.) GAME You can enjoy more virtual sound while playing video games. NIGHT This may be useful when you want to watch movies at low volume late at night. RETOUCH When listening to MP3 files or other compressed music, you can enhance the sound.
Operation Advanced Operations Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. 1. Connect the USB device to the unit. 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing z REC. 4. To stop recording, press x (STOP). [All tracks/ files recording] Record to USB in stop or play mode.
Maintenance 37 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Never stick paper or tape on the disc. Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. After playing, store the disc in its case.
Troubleshooting 6 Troubleshooting PROBLEM CAUSE CORRECTION Plug the power cord into the wall outlet No power The power cord is disconnected. securely. Select the appropriate video input mode The TV is not set to receive the DVD signal. on the TV so the picture from the unit appears on the TV screen. No picture The video cables are not connected Connect the video cables securely to both securely. the TV and unit.
Appendix 39 7 Appendix Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Appendix Area Codes Choose a area code from this list.
Appendix Trademarks and Licenses 41 Energy Saving ( Extremely Low Power Consumption) On the LG products, an innovative power consumption system in stand-by mode is built. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending.
Appendix Specifications General • Power requirements: Refer to main label • Power consumption: Refer to main label • Dimensions (W x H x D): 430 x 62.5 x 281 mm without foot • Net Weight (Approx.): 4.0 kg Tuner FM Tuning Range: 87.5 to 108.0 MHz or 87.50 to 108.
Appendix 43 Speakers • Front speaker Type: Impedance : Rated Input Power: Max. Input power: Net Dimensions (W x H x D): Net Weight: • Rear speaker Type: Impedance Rated Input Power: Max. Input power: Net Dimensions (W x H x D): Net Weight: • Center speaker Type: Impedance: Rated Input Power: Max. Input power: Net Dimensions (W x H x D): Net Weight: 270 x 1050 x 225 mm 3.1 kg 2 Way 2 speaker 4Ω 180 W 360 W 270 x 1050 x 225 mm 3.0 kg 2 Way 3 speaker 4Ω 180 W 360 W 320 x 102 x 85 mm 1.
HT905TA-F2_BPHLLL_ENG_6946.
