OWNER'S MANUAL LG CineBeam AI ThinQ DLP Projector Please read the safety information carefully before using this product. HU85LA HU85LS www.lg.com P/NO : SAC37813542 (2303-REV03) Copyright © 2019 LG Electronics Inc. All Rights Reserved.
CONTENTS ENGLISH LICENSES 3 Open Source Software Notice Information 4 SAFETY PRECAUTIONS 5 PREPARATION 19 INSTALLATION 26 MAGIC LIGHTING REMOTE 32 CONNECTING DEVICES 38 SPECIFICATIONS 43 SYMBOLS 48 TROUBLESHOOTING 49
LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS 2.0 Channel, DTS 2.
Open Source Software Notice Information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SAFETY PRECAUTIONS WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN T he lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
For places where oil or oil mist can reach, do not install the product on a wall or ceiling. • The product may be damaged and fall. Do not allow a child to hang or climb on the installed projector. • The projector may fall and cause injury or death. When installing the product on the ceiling, observe the following precautions to prevent the projector from falling: −− Contact the Customer Support Center for installation.
CAUTION When moving the projector, be sure to turn off the power switch and disconnect the power plug, antenna cable and the connection cord between the devices. • A failure to do so may cause damage to the projector or the cord, resulting in a fire or electric shock. ENGLISH Do not install the projector on a shaky shelf, a slanted place, a place subject to vibrations, a place where the projector is not fully supported or on a fabric such as tablecloths.
When in Use WARNING When thunder or lightning strikes, unplug the power cord and do not touch the antenna wire. • It may cause an electric shock. When using the product with an external device such as a game console connected, keep the length of the connection line enough. • The product may fall over and cause injury or product damage. Do not scratch or give an impact on the projector with metallic materials or objects. • It may cause injury to people or damage to the product.
Keep the plastic wrapping of the product out of the reach of children. • If a child misuses it, it may suffocate the child. Do not touch near the vents during the operation or immediately after the power is turned off as they generate intense heat. • The heat does not indicate a defect or a problem of the projector when it is operating so use it with confidence. ENGLISH Do not look into the front of the lens when the projector is operating.
CAUTION Do not use any product that uses high voltage electricity near the projector. (e.g. An electric fly swatter) • It may cause a malfunction. The surface of the AC adapter is hot, so be careful not to put the surface against your skin or let the children touch the surface during use. (Except for the models that do not use an adapter) Do not hold or move the projector upside down by grabbing only the power cord, signal cable, or projection mirror.
Do not block the light from the projector lens with a person, book or other objects. • If the light from the projector shines on an object for a long time, it can cause fire due to the heat of such light. Also, the reflected light can heat the lens and cause damage to the projector. ENGLISH Do not mix old and new batteries together. • It may cause battery rupture or fire due to liquid leakage or may cause electrical shock.
Power WARNING Make sure the power plug is securely plugged in to prevent it from shaking. • If the connection is unstable, it may cause a fire. Do not insert a metal object such as chopsticks into the other end of the power plug while it is plugged into a wall outlet. Also, do not touch the power plug immediately after unplugging it from the outlet. • It can cause an electric shock. Connect the power plug to a grounded outlet or multi-tap.
ENGLISH If any of the following occurs, it could be a malfunction of the product, so you must immediately turn the projector off, unplug the power cord from the outlet, and contact the service center: −− When the product is damaged; −− When the product fails; −− When there is a foreign substance inside the product; or −− When the product smokes or smells. • It may cause a fire or electric shock. CAUTION Do not unplug or plug the power plug from/in the outlet while the power switch is on.
Cleaning WARNING Do not spray water directly onto the projector when cleaning it. • It may cause a fire or electric shock. How to clean the projector −− Disconnect the plug from the outlet before cleaning. −− Do not wipe the optical system (the lens and mirror) immediately after the power is turned off. −− Do not spray the water with a sprayer on the product or wipe the product with a damp cloth. −− Wipe the product gently with a soft cloth.
Antenna WARNING Bend down the part where the outdoor antenna line goes into the inside so that rainwater cannot flow into it. • Rainwater going into the product may cause a fire or electric shock. ENGLISH CAUTION If you are using an outdoor antenna, please install it away from electrical wires to make sure it does not touch any nearby wires even when it falls down due to heavy wind. • Failure to do so may cause electric shock or physical injury.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Antenna Lead in Wire Ground Clamp Electric Service Equipment Ground Clamp For USA NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820 - 40 of the National Electric Code (U.S.A.).
Laser WARNING • You risk being exposed to laser radiation if you manipulate or alter the product in a way not specified in the user manual. • Be sure not to let infants or people with diseases directly watch the light source. ENGLISH CAUTION • This product is a class 1 laser device that meets IEC 60825-1. Built-in laser standard (class 4 laser module) • Blue –– Wavelength: 448 nm - 462 nm –– Light output: approx. 95 W x 2 • Red –– Wavelength: 636 nm - 642 nm –– Light output: approx. 2.
PREPARATION The pictures may differ slightly from the actual product. Accessories ENGLISH Accessories included with the projector are show below. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Magic Lighting Remote Two AA Batteries Owner’s Manual Power cord Edge guards • When connecting an HDMI or USB cable, or connecting a USB flash drive to the HDMI or USB port, use a product that has a width of 18 mm (0.
Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice.
Parts and Components Focus Ring Cover4) Inlet Vent Lens2) ENGLISH Outlet Vent1) Speaker Joystick Button IR Receiver Bottom of the Projector Adjustable leg3) 1) Due to the high temperature of vent area, do not get close to the vent area. 2) Do not touch the lens when using the projector. The lens may be damaged. (Keep lens away from sharp objects.) 3) Turn the adjustable leg left or right to adjust the angle. 4) Be careful not to get your fingers caught when closing the projector’s door.
ENGLISH 3 1 4 5 2 7 1 Port 2 USB 2.
Using the Joystick Button You can operate the projector by pressing the button or moving the joystick left, right, up, or down. Basic functions When the projector is turned off, place your finger on the joystick button, press it once, and release it. Power Off (Press and Hold) Press and hold the joystick button for more than 3 seconds while the projector is on. Volume Control Place your finger over the joystick button and move it left or right, you can adjust the volume level.
Adjusting the menu When the projector is turned on, press the joystick button one time. You can adjust the menu items ( , , , ) moving the joystick button left, right, up, or down. Move to the desired menu item, and then press the joystick button once to select it. ENGLISH Turns the power off. Changes the input source. Clears on-screen displays and returns to projector viewing. Displays the Settings menu.
Projector Status Indicators ENGLISH LED Power Indicator LED Power Indicator Red Power standby state Off The projector is operating with the power on.
INSTALLATION How to use the edge guards It prevents any damage to the product and injury when being attached to sharp edges of the product.
Projection Distance per Screen Size 1 Place the projector on a sturdy, level surface, together with the PC or audio/ 2 4 Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen. If the projector is not at a right angle, the projected image will look distorted. To correct the distortion, use the Edge Adjustment function.
Ratio of upward projection: 120 % X Screen ENGLISH Y C C D D B A Screen Size inches 90 95 100 105 110 115 120 mm 2286 2413 2540 2667 2794 2921 3048 inches 78.4 x 44.1 82.7 x 46.5 87.1 x 49.0 91.4 x 51.4 95.8 x 53.9 100.2 x 56.3 104.6 x 58.8 Horizontal Size (X) x Vertical Size mm (Y) A B C D 1992 2103 2214 2324 2435 2546 2657 x 1121 x 1183 x 1245 x 1308 x 1370 x 1432 x 1494 inches 15.8 16.6 17.5 18.3 19.2 20.0 20.8 mm 403 424 445 466 488 509 530 inches 2.
Focus of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. 1 Move the projector to the left or right to check that the projection fits on the screen. ENGLISH 2 Press (Edge Adjustment) button on the remote control to execute the [Edge Adjustment] function.
3 ENGLISH To adjust the focus of the image, slowly adjust the focus ring to the left or right while looking at the top center of the screen. You can adjust the focus most effectively when the left and right screen are balanced. When adjusting the focus on the screen, do not let the product shake. –– Before using the focus ring, press the lower left corner of the focus ring cover once to open the cover. Please open the focus ring cover before using the focus ring.
Kensington Security System ENGLISH • This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below. • For more information on installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. • The Kensington Security System is an optional accessory.
MAGIC LIGHTING REMOTE ENGLISH • Depending on country If the battery low message appears while using the Projector, replace the batteries. As shown in the figure, press the top of the battery cover and slide it down the cover. Insert two new and identical batteries (1.5 V, AA type) with + and - poles pointing in the correct direction in the remote control. * : To use the button, press and hold for more than 3 seconds. 1 2 CAUTION • Do not mix new batteries with old ones.
Adjusts the volume level. (MUTE) Mutes all sounds. (MUTE) * Accesses the [Accessibility] menu. (Search) Search for content such as movies and other videos, or perform a web search by entering your search terms in the search box. Scrolls through the saved channels. Accesses the Home menu. * Displays the list used previously. (Q. Settings) Accesses the Quick Settings. (Q. Settings) * Displays the [All Settings] menu. (Up/Down/Left/Right) Press the up, down, left or right button to scroll the menu.
(Back) Returns to the previous screen. (Back) * Clears on-screen displays and returns to last input viewing. Shows channels guide. ENGLISH Streaming Service buttons Connects to the Video Streaming Service. (INPUT) Changes the input source. (INPUT) * Accesses the [Home Dashboard]. These access special functions in some menus. The remote control buttons light up so that you can use the remote control in the dark.
To Register the Magic Lighting Remote You must pair the Magic Lighting Remote with the projector to use it. Pair the Magic Lighting Remote prior to use as follows. 1 2 Put batteries into the Magic Lighting Remote and turn the Projector on. To Re-register the Magic Lighting Remote 1 Press the and buttons at the same time, for five seconds, to unpair 2 the Magic Lighting Remote with your projector. Press the Wheel (OK) button towards the projector to re-register the Magic Lighting Remote.
Using the Magic Lighting Remote ENGLISH • If you shake the Magic Lighting Remote left and right or turn its wheel while pointing it at the projector, a pointer will appear on the projector screen. If you move the remote control in the direction you want, the pointer follows the movement. Move the pointer to the location you want and press the Wheel (OK) button to execute the function.
Setting the Pointer of Magic Lighting Remote ENGLISH [Accessibility] [Pointer Options] • You can set the pointer speed and size you want while it is on the screen. –– [Tracking Speed]: Sets the pointer speed. –– [Pointer Size]: Selects the pointer size. • If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Lighting Remote right and left.
CONNECTING DEVICES You can connect various external devices to the projector. Connecting the Antenna or Cable ENGLISH To watch TV using an indoor/outdoor antenna, connect a wall terminal and the antenna port of the projector using an RF cable (75 Ω). You can watch terrestrial or cable (analog, digital) TV. Optional Extras NOTE • Make sure not to bend the copper wire of the RF cable (75 Ω). Turn the input jack to the right to fasten it.
Connecting with a HDMI Cable Optional Extras NOTE ARC (Audio Return Channel) • External audio devices that support SIMPLINK and ARC must be connected using port. ( ) • When connected with a high-speed HDMI® cable, external audio devices that support ARC output or SPDIF work with the SIMPLINK function without the need for an additional optical audio cable. When connecting PC/laptop • The projector supports Plug and Play.
Connecting with a USB-C Cable Connect the USB-C terminal of the projector to the USB-C output terminal of a PC/laptop or smartphone using a USB-C cable. Contact the manufacturer of your device to see if this feature is supported. Only the smartphones that support USB-C will work. • (INPUT) [Home Dashboard] [INPUTS] [USB-C] ENGLISH Optional Extras NOTE • PD (Power Delivery) and DP Alternate Mode are supported.
Connecting a Digital Amp Optional Extras NOTE • Refer to the user manual of the audio device to connect. • When connecting this product to other devices, make sure to turn off and unplug all the devices. • The audio output of this product has wide-ranging audio bandwidth, so the receiver volume must be adjusted properly. Speakers can be damaged by unexpected high frequencies.
Connecting a smart device (smartphone, tablet, etc.) ENGLISH • (INPUT) [Home Dashboard] [INPUTS] [HDMI1]/[HDMI2] • The picture may look different from the actual product. Connect a smart device to the projector using a cable1) and set the external input of the projector to HDMI. The smart device screen will then be displayed through the projector. You can connect with any HDMI input port.
SPECIFICATIONS HU85LA (HU85LA-NA) HU85LS (HU85LS-NA) MODEL Program Coverage External Antenna Impedance Height Width Depth Weight USB Device Environment Condition 3840 (Horizontal) × 2160 (Vertical)1) 16:9 (Horizontal:Vertical) 403 mm to 530 mm (15.8 inches to 20.8 inches) −− 2286 mm to 3048 mm (90 inches to 120 inches) 120 % 350 W AC 100 - 240 V, 50/60 Hz, 3.5 A 5W+5W ATSC / NTSC-M / 64 & 256 QAM VHF 02 to 13, UHF 14 to 69, CATV 01 to 135, DTV 02 to 69, CADTV 01 to 135 75 Ω 128 mm (5.
HDMI (DTV) / USB-C (DTV) Supported Mode ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.46 59.94 640 x 480 31.5 60.00 720 x 480 31.47 59.94 720 x 480 31.5 60.00 720 x 576 31.25 50.00 1280 x 720 44.96 59.94 1280 x 720 45 60.00 1280 x 720 37.5 50.00 1920 x 1080i 28.12 50.00 1920 x 1080i 33.72 59.94 1920 x 1080i 33.75 60.00 1920 x 1080p 26.97 23.97 1920 x 1080p 27.00 24.00 1920 x 1080p 33.71 29.97 1920 x 1080p 33.75 30.
Horizontal Frequency (kHz) Vertical Frequency (Hz) 3840 x 2160p 53.95 23.98 3840 x 2160p 54 24.00 3840 x 2160p 56.25 25.00 3840 x 2160p 61.43 29.97 3840 x 2160p 67.5 30.00 3840 x 2160p 112.5 50.00 3840 x 2160p 134.86 59.94 3840 x 2160p 135 60.00 4096 x 2160p 53.95 23.98 4096 x 2160p 54 24.00 4096 x 2160 56.25 25.00 4096 x 2160 61.43 29.97 4096 x 2160 67.5 30.00 4096 x 2160 112.5 50.00 4096 x 2160 134.86 59.94 4096 x 2160 135 60.
HDMI (PC) / USB-C (PC) Supported Mode ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.46 70.09 720 x 400 31.46 70.08 640 x 480 31.46 59.94 800 x 600 37.87 60.31 1024 x 768 48.36 60.00 1360 x 768 47.71 60.01 1152 x 864 54.34 60.05 1280 x 1024 63.98 60.02 1920 x 1080 67.5 60 1920 x 1080 135 120 3840 x 2160 54 24.00 3840 x 2160 56.25 25.00 3840 x 2160 67.5 30.00 4096 x 2160 53.95 23.
Other specifications Risk Group 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. ENGLISH This label is attached to the bottom of the product and language may differ.
SYMBOLS Refers to alternating current (AC). Refers to direct current (DC). ENGLISH Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage.
TROUBLESHOOTING Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. Checklist for Safety (please check a long-used projector for safety issues.) • The projector does not display anything on the screen or output sound when it is turned on. • The product emits smoke or a burning smell. • Water or foreign substances are present inside the product. • Part of the projected image is cut out.
ABOUT LG PROJECTOR Image shown may differ from your projector. Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual. [ ] : the buttons and the text to be displayed on the projector screen. P/NO : SAC37813544 (2004-REV01) Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2 CONTENTS ABOUT LG PROJECTOR 3 ENGLISH HOW TO OPERATE THE PROJECTOR 10 ENJOY LIVE TV 21 HOW TO USE VARIETY OF CONTENTS 30 CONNECT OTHER DEVICES 36 BENEFITS OF SMART PROJECTOR 65 TOUR LIST OF SETTINGS 69 TO UPDATE SOFTWARE 107 TROUBLESHOOTING 108
3 ABOUT LG PROJECTOR Home Tutorial You can open the Home screen by pressing the button on your remote control. You can combine frequently used apps on a single screen and use whichever you want at any time. 6 1 2 3 4 5 1 Launch [Search]. 2 Move to the [Home Dashboard]. You can select or control a device (mobile, external device, etc.) connected to the projector. 3 Move to the TV input you used recently.
4 ENGLISH 4 Move to the recently used app. Long-press the button on the remote control or focus the [Recents]. You can run or close a recently used app in the list provided in the preview area at the top. 5 You can run, move, and delete all the apps installed on your projector. 6 Focus on each App area. It provides the preview at the top. You can check or run useful features of each app and recommended content on the preview without entering into the app. • Some apps may not provide the preview.
5 Manage LG Projector Home You can view a list of all apps installed on your projector, change their positions, or delete them. 1 3 To move the app to your desired position, go to the position and press the Wheel (OK) or OK button. To delete an app, select the above the app. • You can move and delete as many apps as you wish before exiting the edit mode. • You can also move apps with the buttons on your remote control. After the editing is done, press the at the top right to exit the app edit mode.
6 1 2 ENGLISH 1 You can automatically arrange the app list in the order of most frequently used based on your accumulated app usage pattern. 2 You can add your favorite video service channel to the list. • This feature is available only when the network is connected. • Some models may not be supported.
7 Prepare Live TV Watching TV broadcasting 1 Start the (Q. Settings) [Channels] [Channel Tuning] Tuning]. Finds and adds only channels being broadcast. [Auto ENGLISH 2 Connect the broadcast antenna/cable to the projector. You may also connect a piece of equipment that can receive broadcasting such as a set-top box instead of the antenna/cable. Run the (Q. Settings) [Connection] [Device Connector] and select the [Set-Top Box/OTT] that appears in the device list, and you can see it.
8 Network Setting Network Setting If you configure settings for the network, you can use various services such as online contents and applications. ENGLISH Setting a Wired Network 1 2 Connect the LAN port of the projector and the router using a LAN cable. The router should be connected to the Internet beforehand. Press the (Q. Settings) button on the remote control and select [Connection] [Wired Connection (Ethernet)].
9 Network Setting Warnings ENGLISH • Use standard LAN cable (connect to Cat7 or higher with RJ45 connector, 10 Base-T, or 100 Base TX LAN port). • Resetting the modem may fix some network connection problems. Turn the power OFF, disconnect and reconnect it, and then turn the power on to solve the problem. • LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
10 HOW TO OPERATE THE PROJECTOR Using Projector Functions through Speech ENGLISH You can easily and quickly access the projector’s various functions through speech recognition. 1 2 Press and hold the button on the remote control and speak out the function you want to launch or the keyword you want to use for your search. Once you release the function is launched.
11 ENGLISH • This feature is available in certain countries only. • Your [Location] must correspond to the language for exact search results. Some function may not be available if your location settings and language settings are different. • You can change the language in (Q. Settings) [General] [Language] [Menu Language]. • The languages available for voice recognition features may be changed in accordance with service operation policy. • Details of service may vary by model.
12 Cautions for Speech Recognition ENGLISH • Voice recognition requires a Magic Lighting Remote, which may not be supported by certain models. • To use all speech recognition features, you need to set your channels, regions, etc. Otherwise, you cannot use some features. • You must have a network connection to use the speech recognition feature. • If you have a network connection, you need to accept the terms and conditions to use speech recognition.
13 To View More Features of the Remote Control You can control more features or external devices connected to your projector by using the buttons displayed on your projector screen. Press the button on the remote control. Using the remote control, select your desired button on [More Actions] displayed on your projector screen. 1 3 5 2 4 6 1 When you select a device, the [More Actions] turns into the remote control for the device.
14 ENGLISH 3 You can capture your projector screen. • Some models may not be supported. • You can view/delete screen-captured images in the [Photo & Video] app. • You can copy screen-captured images to USB storage device in the [Photo & Video] app. (Some models may not be supported.) 4 It displays the information for the program you are watching, external input, photographs, music, video, etc. on the screen. 5 You can set the video/sound mode for watching sports games.
15 Universal Remote Control With the Magic Lighting Remote, you can control Set-Top Boxes, Blu-ray Players, Home Theater systems, etc. Automatically Setting the Universal Remote Control ENGLISH Connect the devices to be set to the projector’s HDMI input, and turn the power of the device on. The projector will scan the connected device to automatically set the universal remote control without manual setting. • After setting the universal remote control, you may need to do some additional user settings.
16 Manually Setting the Universal Remote Control If the universal remote control is not automatically set or it is connected to the AV input/Component input, you can manually set it. ENGLISH 1 2 3 • • • • • • • • • Select the (Q. Settings) [Connection] [Device Connector]. Select the type of the device you want to set. Complete the settings for the universal remote control according to the guidance on the screen. You can change or cancel the universal remote control settings.
17 Launching Apps through [QUICK ACCESS] Using apps quickly and easily with [QUICK ACCESS] Press and hold a number button on the remote control to open an app or to activate an external input registered to the button. 1 2 3 Launch the app or select the channel or input you wish to assign. Press and hold the number button (1~8) you want to register. No. 9 is fixed to [QUICK HELP]. When the registration pop-up window appears, select [Yes].
18 Checking and editing [QUICK ACCESS] Press and hold the number 0 button on the remote control. The [QUICK ACCESS] edit screen appears. 4 ENGLISH 1 2 3 1 Selecting a number that has already been registered allows deregistering it. 2 When you select a number that has not been registered, items that can be registered will be shown. 3 An item that has been registered to a different number is indicated with a check mark. 4 You can view a brief instruction for this function.
19 Using SIMPLINK You can conveniently control and use various multimedia devices connected through HDMI with the projector’s remote control. 1 3 4 5 Press the (Q. Settings) button on the remote control and select [Connection] [HDMI Device Settings]. Set [SIMPLINK (HDMI-CEC)] to [On]. Configure the [Auto Power Sync] settings to [On] or [Off]. (If [Auto Power Sync] is set to [On], turning on a SIMPLINK-linked device will turn the projector on.
20 Supported SIMPLINK Functions ENGLISH • Instant Play When you start a multimedia device, you can immediately watch content from the device on the projector without having to control anything. • Controlling devices with the projector remote control Enables the user to control multimedia devices with the projector remote control to watch content. —— The pointer function of the Magic Lighting Remote can be limited.
21 ENJOY LIVE TV Live Menu You can use the relevant features with ease when watching TV broadcasts. 1 2 Run [TV] by pressing . Move the Magic Lighting Remote’s pointer to the left side of the projector screen. You can bring it up by pressing the button on the remote control even when you are not watching any broadcasts. 1 2 3 4 1 [RECOMMENDED]: Get channel and program recommendations based on your viewing history. 2 [CHANNELS]: View a list of broadcast content that is currently being broadcast.
22 ENGLISH • The channels displayed in Channel List are a configuration of channels provided by the broadcast service provider. Therefore, if the broadcast service provider has changed its channel configuration without notice, the channels displayed in Channel List may differ from the actual TV channels. • Because channel information displayed in Channel List includes information provided by external Electronic Program Guide (EPG) providers, it may differ from the actual TV channels.
23 Guide Viewing Guide You can view programs and the schedule of each program. Press the remote control’s button, and select the [GUIDE] tab on the left side of the screen. 1 2 4 5 1 Click on each area, and you can move to the app. 2 You can view information about the channel and broadcast. 3 You can view information about the program you are currently watching as well as the focused program information. 4 Select the button or the title of the desired program.
24 ENGLISH 6 Launch [CHANNEL MANAGER]. 7 You can change the size for the program list to adjust the number of channels displayed on the screen. 8 Sets the filter. 9 You can turn on / off Mini TV. • Program information is not displayed for channels with no provided broadcast information. Viewing Set-Top Box Guide After connecting the Set-Top Box, you can view programs and the schedule of the SetTop Box and use the Magic Lighting Remote. • Some models may not be supported.
25 Checking Program Info Viewing Program Information While watching a live broadcast press the appears. Wheel (OK) button. The Channel Banner ENGLISH 1 2 3 1 Move to the [CHANNELS]. 2 It display the information about the program you are watching. Select a channel banner to enter the detailed information pop-up to see the detailed program information or run additional features related to the banner. You can view broadcast information about other channels using the buttons.
26 3 If the program you are watching includes information such as [Closed Caption] or [Audio Language], you can set these features. • Available features may vary depending on the broadcast signal. You can set [Closed Caption]. ENGLISH You can set [Audio Language]. • Only available with digital broadcasts. You can set [Multi Audio]. • Only available with analog broadcasts.
27 Using [MAGIC LINK] It offers various videos and information related to the program you are currently watching. If you are watching a program via a set-top box, you should complete the universal remote control settings to use the [MAGIC LINK] function properly. 2 3 • • • • • • • Press the appears. Wheel (OK) button on your remote control. The Channel Banner Press the [MAGIC LINK] button in the Channel Banner.
28 Using [TV SCHEDULER] This function is used to set the time and date for watching a specific program. 1 2 Press the remote control’s the left side of the screen. Select the button, and select the [TV SCHEDULER] tab on at the top right. ENGLISH 1 2 3 4 1 You can sort the list. 2 You can set the Delete Mode. 3 You can set the New Reminder. 4 Launch [GUIDE].
29 Schedule by program You can select a show to Schedule it for watching. 1 2 Press the remote control’s side of the screen. button, and select the [GUIDE] tab on the left Manual Scheduling You can select the date, time, and channel to watch the channels. 1 2 3 4 5 Press the remote control’s the left side of the screen. Select the at the top right. Select the at the top right. button, and select the [TV SCHEDULER] tab on Select [CREATE MANUALLY]. Set the date, time, and channel to watch.
30 HOW TO USE VARIETY OF CONTENTS LG Content Store ENGLISH You can quickly and conveniently browse for TV Shows, Movies, and more to watch immediately. You can also download and use apps from various categories such as education, entertainment, lifestyle, news, and games. 1 2 Press the button on the remote control. Launch the [LG Content Store] application. • Depending on the model, the provided contents may differ or some features may be limited. • Exercise caution when in used by children.
31 Creating LG Account In [Account Management], you can use your email address to create a new LG account. 1 6 • • • • (Q. Settings) button on the remote control and select [Account Management]. Select [CREATE ACCOUNT]. Read and accept the Terms of Service. Enter an ID and a password. Your ID must be your email address. Enter your birthday. Select [OK]. Go to your email to verify your email address. Please verify your email before the time expires.
32 Managing your LG Account You can manage the information of your LG account. 1 2 Press the Go to (Q. Settings) button on the remote control. [General] [Account Management] to log in. ENGLISH Personal Information You can view or edit your information of the account currently logged in. You can change the password or press [EDIT] to edit your personal information. • Some models may not be supported.
33 Search Content [Search] [Search] allows you to find and use a variety of content and information. You can search for files, including image, video, and audio files. 1 2 3 Press the Launch ENGLISH Searching for Content button on the remote control. . Search for a variety of content and information by typing in your desired search terms. 1 1 Enter your desired search term. 2 Change the settings of the features provided by [Search]. 3 Exit the search.
34 Use App & Contents Installing Apps You can install various apps on your projector from the [LG Content Store]. ENGLISH 1 2 3 4 5 6 Press the button on the remote control. Launch the [LG Content Store] application. Select your desired category from the categories shown at the top of the screen. The list of available apps in the selected category will be shown. Select an app to set up from the list. Read the details of the app and then press [Install].
35 Watching VOD Content You can immediately enjoy dramas, movies, and more with real-time streaming. 1 2 3 button on the remote control. Launch the [LG Content Store] application. Select your desired category from the categories shown at the top of the screen, such as TV Shows and Movies. The list of available content in the selected category will be shown. Select an item from the list. You can play your desired content. An app may be required to play the content.
36 CONNECT OTHER DEVICES Using [Home Dashboard] ENGLISH You can select or control a device (mobile, external device, Home IoT Devices, etc.) connected to the projector. • Press and hold the button on your remote control. 4 5 6 7 1 2 3 1 You can check and select the connected smart device with the LG TV Plus. You can play sound from a smart device connected via Bluetooth. 2 You can check and select the external device connected through the external input port or network.
37 You can edit the name or change the icon of a device connected to the Inputs. You can edit the name of a device connected to the [HOME IoT DEVICES] or [SHOW]/[HIDE] the device. • Some devices cannot be edited. 5 [OCF Connection]: If you set it to be [On], any device that supports OCF will be linked too. [Notice]: If you turn it [On], you can receive notifications about the status of the Home IoT Devices. [Device Connector]: You can start the [Device Connector] app. 6 It refreshes the device list.
38 Mobile Connection You can use a variety of features by connecting the projector to a smart device. Connecting Your Smart Device to a Projector Using the LG TV Plus App ENGLISH 1 2 3 4 Download the LG TV Plus app from the app store of your smart device. Connect your projector and smart device to the same Wi-Fi network. Run the LG TV Plus app installed on your smart device. Follow the instructions from LG TV Plus app to connect your smart device to the projector.
39 Controlling Your Projector with the LG TV Plus App You can tap the buttons on your smart device’s screen to control the projector. 1 2 ENGLISH 3 1 You can use the same functions as the Magic Lighting Remote’s pointer and arrow keys. 2 You can change the channel, adjust the volume, or make other adjustments without using the remote control while watching a broadcast.
40 Share Content with the LG TV Plus App You can share and enjoy the content stored on your smart device through your projector. 1 2 Run the LG TV Plus app installed on your smart device. Set up your desired content on your projector. ENGLISH Matters That Require Special Attention during Content Share • Check your network settings if the Content Share option does not work properly. • May not work properly on a wireless network. It is recommended that you connect to a wired network.
41 Share Smartphone Screen To see the Mobile Device's screen on the projector • • • • • • Enable Screen Share mode on the mobile device. Your projector will be displayed in the list of available devices. Select your projector and request connection. After the connection is established, the projector will display the screen of the connected device. For a reliable connection always keep the connected device to your projector updated to the latest OS version.
42 Playing Sound from a Smart Device through the projector’s Speakers Connect a smart device to the projector via Bluetooth to play sound from the smart device through the projector’s speakers. ENGLISH 1 2 3 4 Press the button on the remote control and select [Home Dashboard]. In the [MOBILE] area, run the [Bluetooth Audio Playback]. Turn the smart device’s Bluetooth on, then select the projector from the list of devices. The projector will be connected to the smart device.
43 Connecting USB Connect a USB storage device (USB HDD, USB Flash Drive) to the USB port on the projector to enjoy the content files stored on the USB storage device on your projector. ENGLISH USB Flash Drive USB-C Flash Drive Models with USB-C support only. • Please check whether USB 2.0 is supported before using USB-C storage devices. • Certain functions may not work properly depending on USB-C to USB-A cable or gender used.
44 Tips for Using a USB storage device ENGLISH • A USB storage device that has a built-in automatic recognition program or uses its own driver might not be recognizable. • Some USB storage devices may not be supported or may not work properly. • If you use a USB extension cable, the USB storage device may not be recognized or may not work properly. • Please use only USB storage devices formatted with the FAT32 or NTFS file system provided by Windows OS.
45 [Photo & Video] Viewing Photos and Videos You can view photos and videos using the [Photo & Video] app. Press the button on your remote control. Launch the [Photo & Video] application. ENGLISH 1 2 3 4 Select your desired storage device. Select and view your desired photo or video. 1 2 3 4 1 Select your desired type of content and viewing method. 2 Select and delete your desired content. (You cannot delete files that are shared from other devices.) 3 Select the content you want to play.
46 Photo Player Selecting a photo in the [Photo & Video] app runs the photo player. You can view your saved photos. ENGLISH 1 2 3 4 5 6 7 1 Returns to the entire content list. 2 You can play background music by running the music player. 3 You can zoom the photos in/out. 4 Starts the slide show. 5 Rotates photos. 6 360-degree photos can be viewed in 360 degrees. • Using the 360° VR Play on a normal photo may distort the image. • Some models may not be supported.
47 Supported Photo Files File type Format Resolution JPEG .png PNG Minimum: 64 x 64 Maximum: 5760 (W) x 5760 (H) .bmp BMP Minimum: 64 x 64 Maximum: 1920 (W) x 1080 (H) ENGLISH .jpeg .jpg .
48 Video Player Selecting a video in the [Photo & Video] app runs the video player. You can view your saved videos. ENGLISH 1 2 3 4 5 6 7 1 Returns to the entire content list. 2 You can select other content by displaying the playlist while watching a video. 3 You can control basic video playback functions. 4 Rotates videos. • Some models may not be supported. 5 360-degree videos can be viewed in 360 degrees. • Using the 360° VR Play on a normal video may distort the videos.
49 Setting Additional Options ENGLISH 1 2 3 4 1 You can change subtitle settings. 2 You can set audio tracks. 3 You can set continue watching to resume playing from the last viewed scene. 4 Returns to the basic operation screen.
50 Supported Video Files Maximum data transfer rate: ENGLISH • Full HD video H.264 1920 x 1080@60P BP/MP/HP@L4.2 Maximum 40 Mbps HEVC 1920 x 1080@60P Main/Main10@L4.1 Maximum 40 Mbps • ULTRA HD video (ULTRA HD model only) H.264 3840 × 2160@30P BP/MP/HP@L5.1 Maximum 50 Mbps HEVC 3840 × 2160@60P Main/Main10@L5.1 Maximum 60 Mbps Supported external subtitles: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.
51 Supported video codecs Extension Codec VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (except for 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS .mp4 .m4v .mov Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 .3gp .3g2 Video H.
52 Cautions for Video Playback ENGLISH • Some user-created subtitles may not work properly. • A video file and its subtitle file must be located in the same folder. For subtitles to be displayed properly, make sure that the video file and the subtitle file have the same name. • Subtitles on a Network Attached Storage (NAS) device may not be supported depending on the manufacturer and model. • Streams that include Global Motion Compensation (GMC) and Quarterpel Motion Estimation (Qpel) are not supported.
53 [Music] Playing Music You can listen to music by using the [Music] app. 4 Press the button on your remote control. Launch the [Music] application. Select your desired storage device. You can select your desired songs from all of your storage devices and add them to [My Playlist]. Select your desired music content and enjoy it. 1 2 3 4 5 1 Select the desired type of content list. 2 Select and delete content. (Files shared from other devices cannot be deleted.
54 Using the Music Player The music player lets you choose music from other apps and use it as background music. ENGLISH 1 2 3 4 5 6 7 1 You can play music from the selected storage device. 2 You can set repeat playback and random playback. 3 The configurable items differ depending upon model. : You can turn the screen off while listening to music or display the music player in full-screen mode. : You can listen to music with the screen turned off.
55 You can change the position of the music player. 5 You can minimize the music player. 6 This feature closes the music player. 7 Lyrics are available for music files that provide them. In some music files, you can choose a lyric section and move the playback position. • The lyrics feature is only supported on some devices. • The lyrics may not be displayed in sync depending on the lyrics data in the music file. • Reopen your music player by pressing the volume buttons on your remote control.
56 Audio Format File Format .mp3 ENGLISH .wav .ogg .wma .flac Item Info Bit rate 32 kbps ~ 320 kbps Sample freq. 16 kHz ~ 48 kHz Support MPEG-1, MPEG-2 Channels mono, stereo Bit rate - Sample freq. 8 kHz ~ 96 kHz Support PCM Channels mono, stereo Bit rate 64 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Vorbis Channels mono, stereo Bit rate 128 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support WMA Channels up to 6 ch Bit rate - Sample freq.
57 [File Viewer] Viewing Files You can see document files stored on a connected device. Press the button on your remote control. Launch the [File Viewer] application. ENGLISH 1 2 3 4 Select your desired storage device. Select and view your desired document file. 1 2 1 Select your desired type of content and viewing method. 2 Select and delete your desired content. (You cannot delete files that are shared from other devices.
58 Browsing File Viewer ENGLISH 1 2 3 4 5 6 1 Returns to the entire content list. 2 Moves to the page you specify. 3 Sets the slide show. 4 Enlarges or reduces the document. 5 Starts the slide show. 6 Rotates the document. 7 Sets up the options of File Viewer.
59 Supported File Formats File Extension XLS, XLSX DOC, DOCX PPT, PPTX Supported Version Microsoft Office 97/2000/2002/2003/2007/2010/ 2013/2016 version - PDF Adobe PDF 1.0/1.1/1.2/1.3/1.4 version HWP Hangul 2007 version • File Viewer realigns a document, so it may look different from what is displayed on a PC. • For documents that include images, the resolution may look lower during the realigning process. • If the document is large or has many pages, it may take longer to load.
60 Using Home IoT Devices You can check and control the status of the connected Home IoT devices. 1 2 Press the button on the remote control and select [Home Dashboard]. ENGLISH Press the at the top right to select the [OCF Connection]. • To register your own OCF (Open Connectivity Foundation) supporting device, select the OCF guide to change the settings as directed. 1 2 3 1 You can edit the name of a device connected to the [Home IoT Devices] or [SHOW]/[HIDE] the device.
61 Share Computer Content What Is Content Share? Content Share allows you to enjoy videos, music and photos saved on your PC. Play the content with sharing software on the PC 1 2 Connect you projector and PC to the same network. PCs installed with Windows 7 or later also need to be connected to a network. Right-click the desired music/video/photo file you wish to play, then select your model using the “Play To” feature built into Windows 7 or later to play the file.
62 Use the SmartShare PC Software to play the content saved on the PC You can use SmartShare PC Software to connect the music/videos/photos saved on the PC to your home network and play them on your projector. 1 ENGLISH 2 3 4 Configure the projector and PC installed with SmartShare on the same network. • The SmartShare service is only available when the projector and server PC are connected to a single router. Download and install SmartShare PC Software from the LG website (www. lg.com).
63 Matters that require special attention during Content Share ENGLISH • Check your network settings if the Content Share option does not work properly. • May not work properly on a wireless network. It is recommended that you connect to a wired network. • If multiple display devices are connected to one device, the content may not be played properly depending on server performance. • May not work properly depending on the network environment.
64 Share Computer Screen To see the PC screen on the projector Connect wireless ENGLISH 1 2 3 • • • • • • Enable Screen Share mode on the PC. Your projector will be displayed in the list of available devices. Select your projector and request connection. After the connection is established, the projector will display the screen of the connected device. Always update your device to be connected to your projector to the latest OS version for a reliable connection.
65 BENEFITS OF SMART PROJECTOR Enjoying Internet You can enter the website when you input the web address on the URL bar. If you input the search word, it will find the information about search word base on the search engine. 1 2 Press the button on the remote control. Launch the [Web Browser] application. 1 2 3 4 5 6 7 1 You can add or delete the current page in [Bookmarks]. 2 Reloads the current page. 3 You can turn on/off Mini TV. 4 Zooms in or out of the screen.
66 ENGLISH 5 [History]: You can open or delete the history list. [Bookmarks]: You can open or delete the bookmark list. [Settings]: You can configure simple settings for the browser. [Encoding]: Y ou can change the language when the content is not properly displayed on the web page. 6 You can use the browser in full screen mode. To go back to the original screen, use the Remote Control to move the pointer to the top of the screen. [Exit Full Screen] will display. 7 Exit the [Web Browser].
67 Setting the Web Browser ENGLISH Press at the top of the screen and select the [Settings]. • [On Startup] You can set the startup page of the browser to [Open the New Tab page]/ [Continue where I left off]/[Home page:]. • [Search Engines] You can select the default search engine. —— Search engine settings may be subject to change without notice based on the supplier’s circumstances. • [Recommended Sites] You can change the settings so that [Recommended Sites] are displayed.
68 [Notifications] Using [Notifications] You can view all notifications from projector apps and LG service at the same time. You can view and delete each notification message, and directly move to the app or website using notifications that support shortcuts. ENGLISH 1 2 Press the Go to (Q.Settings) button on the remote control. [General] [About This Projector] and select [Notifications]. 3 4 2 1 1 You can delete notifications.
69 TOUR LIST OF SETTINGS The options may differ depending on the model. Quick Settings Press the (Q. Settings) button on the remote control. Displays a set of light-weight controls quickly and simply such as [Picture Mode], [Aspect Ratio], [Sound Out] and so on. 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Closes the Quick settings. You can set the [Picture Mode]. You can set the [Aspect Ratio]. You can choose the [Sound Out]. You can set the [Sleep Timer]. You can set the [PJT Mode].
70 [Picture] Settings [Picture Mode] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode that is best suited to your viewing environment, preferences or video type. The configurable items differ depending upon model. Depending upon the input signal, the available picture modes may be different. When watching online service content, the Picture Mode may be changed to match the content being shown.
71 [Picture Mode Settings] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] This feature allows you to adjust the selected picture mode in detail. Depending upon the input signal or the selected picture mode, the available options may differ. The configurable items differ depending upon model. • [Contrast] Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast. • [Brightness] Adjusts the overall screen brightness.
72 [Advanced Controls]/[Expert Controls] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Advanced Controls] Depending upon the input signal or the selected picture mode, the available options may differ. The configurable items differ depending upon model. • [Dynamic Contrast] Corrects the difference between the bright and dark areas of the screen for optimal results depending on the brightness of the picture.
73 ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Expert Controls] If you set the picture mode to Expert, you can set the following functions. Depending upon the input signal or the selected picture mode, the available options may differ. The configurable items differ depending upon model. • [Dynamic Contrast] Corrects the difference between the bright and dark areas of the screen for optimal results depending on the brightness of the picture.
74 [Picture Options] ENGLISH (Q. Settings) [Picture] [Picture Mode Settings] [Picture Options] Depending upon the input signal or the selected picture mode, the available options may differ. The configurable items differ depending upon model. • [Noise Reduction] Removes small dots that stand out so as to make the image clean. • [MPEG Noise Reduction] Reduces the noise produced during the creation of digital video signals. • [Smooth Gradation] It reduces jaggies in the picture for a smooth picture.
75 [Aspect Ratio] [Just Scan] (Q. Settings) [Picture] [Aspect Ratio Settings] [Just Scan] If you turn this feature [On], you can view the content in the aspect ratio that is in the broadcast signal or content source. If the edge of the screen is not clean, please turn it [Off]. If set to [Auto], the feature switches between [On] or [Off] status depending on the information contained in the video signal. • The items that can be selected may vary depending on the current input. ENGLISH (Q.
76 [Energy Saving] (Q. Settings) [Picture] [Energy Saving] Reduces power consumption by adjusting peak screen brightness. • [Minimum]/[Medium]/[Maximum] Applies the pre-set [Energy Saving] mode. ENGLISH [Picture Test] (Q. Settings) [Picture] [Picture Test] First of all, start the picture test to see whether the video signal output is normal, and then select whether there is an error. If there are no problems in the test picture, check the connected external device or broadcast signal.
77 [HDMI ULTRA HD Deep Color] Resolution 3840 × 2160p 4096 × 2160p Color Depth/Chroma Sampling Frame rate (Hz) 50 59.94 60 8 bit 10 bit YCbCr 4:2:0 12 bit YCbCr 4:2:01) - - YCbCr 4:2:21) YCbCr 4:4:41) - - RGB 4:4:41) - - 1) Supported when [HDMI ULTRA HD Deep Color] is set to [On]. • Settings are changeable only for the HDMI input currently being used. • You can specify a different setting for each HDMI port. • Some models may not be supported. ENGLISH (Q.
78 [Instant Game Response] ENGLISH (Q.Settings) [Picture] [Additional Settings] [Instant Game Response] Set the HDMI port connected to the device to be [On] to enjoy games with the optimal video for the game. However, if the device doesn’t support it, it may not work properly. • Set the [HDMI ULTRA HD Deep Color] feature to [On] for the HDMI terminal connected to the gaming device to enable [Instant Game Response]. • It works only when the (Q.
79 [Sound] Settings [Adaptive Sound Control] [Sound Mode] (Q. Settings) [Sound] [Sound Mode Settings] You can select the most suitable sound mode for each genre. • [Standard] Optimizes the sound for all types of content. • [Cinema] Optimizes the sound for cinemas. • [Clear Voice III] Boosts voice clarity. • [Sports]/[Soccer] Optimizes the sound for sports. —— The name of the sport may differ depending on region. • [Music] Optimizes the sound for music. • [Game] Optimizes the sound for gameplay.
80 [Sound Mode Settings] ENGLISH (Q. Settings) [Sound] [Sound Mode Settings] The configurable items differ depending upon model. • [Sound Mode] You can select the most suitable sound mode for each genre. • [Balance] You can adjust the volume of the left and right speakers. • [ULTRA Surround] Enjoy an immersive soundscape with the virtual multi-channel surround sound effect. —— The option can be enabled if [Sound Mode] is set to [Standard].
81 [Sound Out] The configurable items differ depending upon model. • When [Instant Game Response] is set to [On], audio delays may occur if you set [Sound Out] to [Bluetooth]/[Optical]/[HDMI ARC]. Switch to [Internal Projector Speaker] or change (Q. Settings) [Sound] [HDMI Input Audio Format] to [PCM]. (Q. Settings) [Sound] [Sound Out] [Internal Projector Speaker] Audio is played through the projector’s internal speakers. Connecting and Using an Audio Device Supporting Optical (Q.
82 Configuring digital sound output settings ENGLISH (Q. Settings) [Sound] [Sound Out] [Optical]/[HDMI ARC] [Digital Sound Out] You can configure the [Digital Sound Out] settings. • These settings are available only when an [Optical]/[HDMI ARC] is selected. • When [Pass Through] is enabled, sound effects may not be output. • The codec output with a device may differ from input signals.
83 Connecting and Using an Audio Device Wirelessly ENGLISH (Q. Settings) [Sound] [Sound Out] [Bluetooth] You can connect wirelessly a Bluetooth audio device or a Bluetooth headset to enjoy your projector’s sound in richer quality and greater convenience. • If you have recently connected device that the sound bar supports LG Sound Sync, this feature automatically tries connecting to that device.
84 Using Wired Headphones ENGLISH (Q. Settings) [Sound] [Sound Out] [Wired Headphones] Select [Wired Headphones] to optimize audio output according to the device connected. • Only available for models with a Wired Headphones port. • Some models may not be supported. • If you connect the wired headphones while the projector is powered on, it automatically detects the wired headphones and redirects audio through them.
85 [HDMI Input Audio Format] (Q. Settings) [Sound] [HDMI Input Audio Format] You can set the audio format for each HDMI input. When the voice delivered through the HDMI port is not synchronized, set it to [PCM]. [Auto Volume] [AV Sync Adjustment] (Q. Settings) [Sound] [AV Sync Adjustment] Adjusts the synchronization of the sound from the speaker that is working. The closer to (+), the slower the audio output.
86 [Channels] Settings [Auto Tuning] ENGLISH (Q. Settings) [Channels] [Channel Tuning] [Auto Tuning] This function automatically searches and remembers channels that are available for viewing. • If the antenna or cable is not connected properly, channels are not added. • [Auto Tuning] finds and adds only channels being broadcast. • A password box will appear in [Safety] mode. [Manual Tuning] (Q. Settings) [Channels] [Channel Tuning] You can manually tune and save channels.
87 [Channel Manager] You can edit the selected channels from all the stored channels or add/delete them to/ from the favorite channels. Edit All Channels List 1 2 1 Lock the selected channels or unlock the locked channels. 2 Set the selected channels to be skipped when switching channels, or disable the skipping option of the channels previously set to be skipped. • Available features may vary depending on the broadcast signal. ENGLISH (Q.
88 Edit Favorite Channels List (Q. Settings) [Channels] [Channel Manager] [Edit Favorites] You can add/delete desired channels to/from the favorite channels, change their positions, etc. ENGLISH 3 4 1 2 1 Select the desired channels from the all channels list and press the button to add them to the favorite channels list. 2 Delete the selected channels from the favorite channels list. 3 Select one or more channels in the Preferred Channels list, press the button, and then position to move it to.
89 [Multi Audio]/[Audio Language] (Q. Settings) [Channels] [Multi Audio]/[Audio Language] Sets the options related to the audio. • Available settings may differ by the program. [LG Channels] ENGLISH (Q. Settings) [Channels] [LG Channels] You can watch real-time broadcasts through this service over the internet. You can see information on new internet channels or manage the channels you like in [LG Channels]. • While watching an internet channel, click the button on the remote control.
90 [Connection] [Projector Name] ENGLISH (Q. Settings) [Connection] [Projector Name] You can use the screen keyboard to set the name for the smart projector to be used on the network. • Up to 25 characters can be entered using the English alphabet. [Wired Connection (Ethernet)] (Q. Settings) [Connection] [Wired Connection (Ethernet)] The projector will be connected automatically to the network if a cable connection is established. To change network connection settings, select [Edit] in Network Settings.
91 [Device Connector] (Q.Settings) [Connection] [Device Connector] This feature is to enable you to easily set the connection between the projector and external device. Follow instructions in [Device Connector]. (Q. Settings) [Connection] [Mobile Projector On] If [Turn on via Wi-Fi] or [Turn on via Bluetooth] is set to [On], you can turn on your projector using an application that supports [Mobile Projector On] or see the screen of the application on your projector.
92 [Screen Share Settings] (Q.Settings) [Connection] [Screen Share Settings] You can press the [DELETE PAIRING HISTORY] to delete the connections of the devices connected the projector by the Screen Share. [HDMI Device Settings] ENGLISH (Q.Settings) [Connection] [HDMI Device Settings] You can link information of devices connected to the projector via the HDMI® cable to set the devices to be controlled by the projector remote control. The configurable items differ depending upon model.
93 [General] [Language] [Location] (Q. Settings) [General] [Location] You can change the location setting of your smart projector. You must set the country manually when you are not connected to the network. The configurable items differ depending upon the country. • [Service Area Zip Code] This function is used to set the broadcast location of the projector by entering your zip code. • [LG Services Country] If you don’t set the [Set Automatically], you can select the country manually. ENGLISH (Q.
94 [Time & Date] ENGLISH (Q. Settings) [General] [Time & Date] You can check or change the time while watching the projector. • [Set Automatically] Automatically sets the time displayed on the projector screen to the time of the digital broadcast sent by the broadcasting company. • [Time]/[Date]/[Time Zone] You can set the time and date manually if the automatically set current time is incorrect. [Sleep Timer] (Q. Settings) [General] [Timers] Sets the projector to turn off at a specified time.
95 [Edge Adjustment] [Auto Keystone] (Q. Settings) [General] [Auto Keystone] [Auto Keystone] provides a rectangular screen image by automatically adjusting the keystone number when there is a trapezoidal screen image caused by tilting of the projector. • [On] Automatically adjusts the keystone number. • [Off] Manually adjusts the keystone number. • Some models may not be supported. [Keystone] (Q.
96 [PJT Mode] (Q. Settings) [General] [PJT Mode] This function turns the projected image upside down or flips horizontal. [AI Service] ENGLISH (Q. Settings) [General] [AI Service] You can enable the recommended services based on the usage history. The configurable items differ depending upon model. • [Personalized Recommendation (Network)] You can get recommendations for viewing history base channels and content through the network. —— [On]: Recommendations based on your viewing history are provided.
97 [Power Saving Mode] [About This Projector] (Q. Settings) [General] [About This Projector] You can check the information about Customer Services, (Software Update, projector Information, and so on.) You can run the [Notifications] to check a notification received while you are using the projector. To check the status of the projector, please run the [Quick Help]. ENGLISH (Q. Settings) [General] [Power Saving Mode] Set power options to reduce energy consumption.
98 [LG Wireless Keyboard] ENGLISH (Q. Settings) [General] [Additional Settings] [LG Wireless Keyboard] This feature enables you to connect a LG wireless keyboard to your device. Turn on the device, set it to pairing mode, and then click [CONNECT] on your projector screen. • Supported keyboard —— LG Rolly Keyboard • If there is a LG wireless keyboard previously connected, it will be automatically reconnected to your projector once your projector turns on.
99 [Screen Saver] [No Signal Image] (Q. Settings) [General] [Additional Settings] [No Signal Image] You can turn on or off the image displayed when there is no signal. • [On] The default image is displayed if there is no signal. • [Off] The [No Signal] message is displayed if there is no signal. [Auto Power] (Q. Settings) [General] [Additional Settings] [Auto Power] Makes the projector turn on automatically when the power cord is connected to the projector.
100 [High Altitude] ENGLISH (Q. Settings) [General] [Additional Settings] [High Altitude] If the projector is used at an altitude higher than 1200 meters (3937.0 feet), turn this on. Otherwise, the projector may overheat or its protection function may be activated. If this happens, turn the projector off and then on again after waiting for several minutes. • Some models may not be supported. [Home/Store Mode] (Q.
101 [Safety] Settings • • • • Set [Safety] to [On]. The initial password is set as “0000”. Some models may not be supported. The configurable items differ depending upon model. (Q. Settings) [Safety] [TV Program Locks] [TV Lock] Locks the TV shows you do not want your children to watch. In addition, locks the TV shows of your choice based on ratings by using the parental control function (V-Chip). • [Children Age]: [TV-Y] (Preschool children aged 2-6 years), [TV-Y7] (Advise school children aged over 6.
102 [Movie Lock] ENGLISH (Q. Settings) [Safety] [TV Program Locks] [Movie Lock] Blocks films that are broadcast and contain inappropriate content, based on the Motion Picture Association of America (MPAA) rating. • [G] (General Audiences): All ages admitted. • [PG] (Parental Guidance Suggested): Some material may not be suitable for children. • [PG-13] (Parents Strongly Cautioned): Some material may be inappropriate for children under 13.
103 [Channel Locks] [Application Locks] (Q. Settings) [Safety] [Application Locks] Select the Applications to lock. You can lock or unlock the application. • The lock function is not immediately available for the currently running application. ENGLISH (Q. Settings) [Safety] [Channel Locks] Select the Channels to lock. [LOCK] You can lock the channels you do not want your children to watch. There will be no images or sound when locked channels are selected. To watch locked channels, enter the password.
104 [Input Locks] (Q. Settings) [Safety] [Input Locks] You can lock or unlock the Input Locks. Select the Inputs to lock. [Reset Password] ENGLISH (Q. Settings) [Safety] [Reset Password] Set or change the password for the projector. Resetting a Lost Password If you lose the password you set, you can reset it as follows: 1 2 3 Press the (Q. Settings) button on the remote control and move the focus to [Safety] [Reset Password]. Press master password input window will appear. on the remote control.
105 [Accessibility] [Audio Guidance] [Pointer Options] (Q. Settings) [Accessibility] [Pointer Options] You can set the pointer speed and size you want while it is on the screen. [Menu Transparency] (Q. Settings) [Accessibility] [Menu Transparency] By setting this feature to [On], you can make some of the menus (e.g. Live Menu, Search, etc.) transparent. ENGLISH (Q.
106 [Closed Caption] ENGLISH (Q. Settings) [Accessibility] [Closed Caption] View closed captions when the TV station provides closed captioned programming. Program closed captions work only on digital/analog broadcasts or external input. Change [Closed Caption] to [On] and select caption setting. • [Analog Mode] [CC 1]-[CC 4] (Closed Captioning)/[TEXT 1]-[TEXT 4] Displays the audio portion of a TV program as text on the projector screen. CC1 is the most common mode in use.
107 TO UPDATE SOFTWARE [CHECK FOR UPDATES] (Q. Settings) [General] [About This Projector] [CHECK FOR UPDATES] When checking for the latest update version, you can perform updates only if an update file of a later version is available. The projector automatically checks your software version but, if necessary, you can perform a manual check. [Allow Automatic Updates] (Q.
108 TROUBLESHOOTING If you experience any of the problems below while using the product, please check the following. There may be no problem with the product. Information on customer service for product problems is available in [General] [About This Projector] on the projector. (Q. Settings) ENGLISH Perform Check-up with the [Quick Help]. When the projector malfunctions, you can get help to solve the problem. 1 2 Press (Q.
109 Abnormal Operation Power/Remote Control Errors The screen does not appear for some time after power-on. • This is because there is a noise-removal process to eliminate any possible noise that may appear during power-on. This does not mean the product is defective. The pointer of Magic Lighting Remote does not appear on the screen. • Hold the remote control towards the projector and long-press button until the instruction appears.
110 I cannot turn the projector on with the remote control. • Please make sure your projector power plug is correctly connected to the outlet. • Replace the batteries in the remote control. (Use alkaline batteries.) • Check whether there are any obstacles in front of the projector’s remote control sensor. Sound bars or other obstacles placed in front of the projector’s lower receiver may obstruct IR signal reception.
111 Screen Problems First of all, perform a (Q. Settings) [Picture] [Picture Test] to check for any abnormalities in the projector. If you are using a set-top box, turn it off, and then turn it back on. Make sure that the set-top box is correctly connected to your projector. I cannot see some channels. • Start the (Q. Settings) [Channels] Tuning]. • If you are using a set-top box, consult its supplier.
112 There is a difference in picture quality for each channel. • XX-0 channels are analog channels. It is recommended for watching digital channels such as XX-1. • Run [Picture Test] first. If it is normal, there may be a problem with the broadcast signal. ENGLISH A digitally broadcast program stops or its screen is broken. • This happens when a signal is weak or reception is unstable. Adjust the antenna direction or check the cable connection. • If the signal strength is too low in (Q.
113 I don’t see anything, or the image keeps flickering when i try to connect the HDMI® cable. • Check whether your HDMI® cable is compliant with the specifications. You may experience flickering or a blank screen if the HDMI® cable is faulty (bent, broken). • Make sure that the cable is correctly connected to the port. Bad or loose contact may cause display problems on the screen. The screen is in black and white or displaying strange colors. • Check the input mode or cable connection.
114 Sound Problems First of all, perform a (Q. Settings) [Sound] [Sound Test] to check for any abnormalities in the projector. If you are using a set-top box, turn it off, and then turn it back on. Make sure that the set-top box is correctly connected to your projector. ENGLISH The screen is fine, but it does not play any sound. • Try another channel. • If you use a set-top box, there will be no sound if you have set the volume of the set-top box or your projector to 0 or enabled Mute.
115 The volume changes when I change the channel. • The volume of different broadcasting stations transmission output may vary. • (Q. Settings) [Sound] [Auto Volume] Set [Auto Volume] to [On]. • If you are using a set-top box, consult its supplier. The stereo sound is not clear on an analog channel, or there is no sound from one of the speakers. • Wheel (OK) or OK Applies only in countries where sound multiplex broadcasting is available.
116 PC Connection Problems ENGLISH Press and hold the button on the remote control to select the on the top right of [Home Dashboard]. In the edit mode, set the icon of the HDMI terminal connected to the PC to [PC] to apply the video and aspect ratio settings that are aligned with the PC. To connect a different device to the same input terminal, you need to set the icon again because the settings of the edit icon will not be automatically restored.
117 [Photo & Video] Movie Playback Problems For more information about supported files, see “[Photo & Video]”. I cannot find a file in the [Photo & Video]. • Check that the files on the USB storage device can be read by a PC. • Check that the file extension is supported. I get a message saying “This audio is not supported” or the video is playing normally but the audio is not. • Check that the file plays without any problems on a PC’s video player. Also check for file damage.
118 ENGLISH I cannot see the subtitles. • Check that the file plays without any problems on a PC’s video player. Also check for file damage. • Check that the video and subtitle files have the same name. • Also check that both the video file and the subtitle file are in the same folder. • Check that the subtitle file format is supported. • Check that the language is supported. (You can check the language of the subtitle file by opening the file in the Notepad.
119 Network Connection Problems You can check the network connection status as shown below. • (Q. Settings) [Connection] [Wired Connection (Ethernet)] • (Q. Settings) [Connection] [Wi-Fi Connection] [Advanced Wi-Fi Settings] • Check the projector or the AP (Router). • Check the connection status of the projector, AP (Router) and Cable Modem. • Power off and power on in the following order; 1. The Cable Modem, wait for the Cable Modem to reset. 2. The AP (Router), wait for the AP (Router) to reset. 3.
120 When X appears next to DNS ENGLISH • Check the AP (Router) or consult your Internet service provider. • Unplug the power cord of the Cable Modem or the AP (Router), wait 10 seconds. Reapply power. • After the Cable Modem or AP (Router) has Initialized (Reset), try to reconnect. • Check that the MAC address of the projector/AP (Router) is registered with your Internet service provider.
121 LG Account Problems In some countries, access to the website (www.lgappstv.com) may be restricted. I forgot my ID/Password. What should I do? • You can initialize the password through E-mail when you select FORGOT PASSWORD? on the sign in screen. • If you signed up on a PC, you can find your ID/Password on the website (www. lgappstv.com). ENGLISH I have already signed up on the projector. Do I still have to sign up again at the website (www.lgappstv.
122 Contents Problems ENGLISH I cannot see any content in HOME. • You may not be able to see the content if the service country setting has been changed. Change to the service country you are going to use the service from in (Q. Settings) [General] [Location] [LG Services Country]. (Some models may not be supported.) • You may not be able to view content that has been deleted. Please reinstall the appropriate app. • The type of supported content differs by country.
123 Internet Browser Problems The Internet browser automatically shuts down when I visit a website. • The Internet browser may be forced to shut down if the available memory size is not sufficient to accommodate the image information for a website. When watching a video in [Web Browser], the video is forced off. • You may be able to fix this by setting [Settings] [Adaptive Streaming using JavaScript] to [Off] in [Web Browser].
