Owner's Manual

Installation

Strong

and even floor

A proper

distance from

adjacent items

Where water

supply can be

easily connected

in a dry place

More than

Height

5 cm

to back

Bottom Pad

Where to Install

Unstable installation may cause vibration

and noise. If the floor to install the

refrigerator on is not even, make the

refrigerator level by rotating the height

adjusting screw.

To ensure proper air circulation around the

fridge -freezer, please maintain sufficient

space on both the sides as well as top and

maintain at least 2 inches (5 cm) from the

rear wall.

Select a place where a water supply can be

easily connected between the automatic

ice maker and dispenser. Installing the

refrigerator in a wet or damp area may

cause rust and may be an electrical hazard.

If this refrigerator is installed where the

ambient temperature is high, the freezing

capacity is deteriorated and the cost of

electricity used increases.

Where it is free

from heat

•

Install the refrigerator at a place where the ambient temperature is 5°C ~ 43°C.

Ambient temperature outside this range may cause product malfunction.

Also, the tube between the dispenser and automatic ice maker may freeze.

NOTE