Owner's Manual

8
Height adjustment
Level them by inserting a flat ( - type) driver into the groove of the left height adjusting
screw and rotating it clockwise (a).
Level them by inserting a flat ( - type) driver into the groove of the right height adjusting
screw and rotating it clockwise (a).
The refrigerator door will close smoothly by raising the front side by adjusting the
height adjusting screw. If the door does not close properly because it is improperly
adjusted, the performance of the refrigerator will be affected.
If the freezer
compartment door
is lower than the
refrigerator
compartment door
If the freezer
compartment door
is higher than the
refrigerator
compartment door
After leveling the
door height
Installation
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Use this appliance on a
dedicated circuit.