Owner's Manual

12
Suitable Kitchenware
Pots and pans
The better the pot, the better the cooking results.
• You can recognize good pots and pans by their bases. The base
should be as thick and flat as possible.
• When buying new pots and pans, pay particular attention to the
diameter of the base. Maunfacturers often only state the diameter
of the rim.
• Pots with aluminum, or copper bases can cause metallic
discolouring on the ceramic glass surface which is very difficult or
impossible to remove.
• Be very careful when using cast iron pots or pots with damaged
bases which are rough and or have burrs on them. Scratches can
occur if they are slid across the surface.
• When cold, pot bases are normally bowed slightly in wards
(concave). They should never be bowed outwards (convex).
• If you use special pots and pans (e.g., a pressure cooker,
simmering pan, wok etc.) please observe the manufacturer’s
instructions.
General information
• The base should always be clean and dry.
• In order to avoid ugly scratches on the ceramic glass cooking
surface, do not slide pots and pans around but lift them up instead
when changing positions.
• Scratches can result from grains of sand (e.g., after washing out
vegetables) which are dragged with the pot across the cooking
surface.
• Always use large pots for dishes with lots of liquid so that nothing
can boil over.