Owner's Manual

VCR
operation
Clock/count selection
Each time the CLOCK/COUNT button is
pressed,
the current time
and the
tape
counter
appears alternately.
The
tape
counter
displays
the
tape
travel time
in
hours,
minutes
and seconds
during recording
and
playback.
Note
:
To reset the counter to
M
0:00:00,
press
the RESET/CLEAR
button.
Memory stop
The
memory stop
makes it
easy
to return to a
particular spot
on the
tape
after
recording
or
playback.
The
tape automatically stops
when the counter reaches
M
0:00:00.
1.
Start
recording
or
playback.
2.
Press the OK button twice to
keep
on
displaying
the current
time or the
tape
counter.
3. Press the CLOCK/COUNT button to
display
the
tape
counter.
4.
Press the RESET/CLEAR button at the
point you
want to
review. The counter
displays
M
0:00:00.
5. Press the STOP button when
you
finish
recording
or
playing
the
tape.
6. Press the REW/n button. The
tape stops
at the
point
M
0:00:00.
7.
Press the
PLAY(x2)
button to
play
back the
tape.
VHS Index Search
System
(VISS)
VISS
signal
marks on the
tape
let
you
scan
through
the start of
different
programmes
or search for a
specific
section of the
tape.
Automatic VISS
signal
mark
A
VISS
signal
is
automatically
marked on the
tape
whenever
recording
starts. The
display
V.MARK will
appear.
Searching
a
particular
VISS mark
1.
Press the VISS button
during playback.
The
display
VISS 00
will
appear
on the screen.
2.
Enter two
digits
with the NUMBER buttons to search for a
specific
section of the
tape.
For
example,
if
the
tape
is at VISS 02 and
you
want to locate
VISS
05,
press
0 3.
3. Press the REW/n button to search
previous
recorded
programmes.
Or
press
the FF/o button to search
programmes
further ahead. The
display
V.SEARCH 03
will
appear
on the screen.
When the
specific
section has been
found,
the
tape plays
back at
normal
speed.
Scanning
each VISS mark
1.
Press the VISS button
during playback.
2.
Press the REW/n or FF/o button.
The
tape
rewinds or advances
rapidly
to the next marked
signal.
Then the
tape plays
back for about 5 seconds.
Each time VISS
signal
is detected and
playback begins,
the
VISS scan
number,
for
example
V.SCAN
04,
will
appear
on the
screen.
3. At the desired
section,
press
the VISS button to
play
back at
normal
speed.
19
VISS
STOP
PLAY(x2)
OK
EJECT
CLOCK/
COUNT
RESET/
CLEAR
REW/ FF/